Things are getting a bit quiet around here....
-
On that theme there are also benches than can be purchased for people sitting in areas. We have a lot here in my city that companies or individuals pay for. Trails and such I believe also do similar? One time cost in most cases.
-
-
@comis said:
I had been subscribing to many popular EDC/gear related IG accounts online, and after seeing literally thousands of pocket dumps, I think what I see most is some kind of sheath or carrying method in most IG posts. Personally, I think there is a big gap in Metro's offering, especially in-pocket options, and that is why many makers have risen in recent years. I think in-pocket organizer will continue to grow since most major cities/countries around the world are becoming less and less knife friendly, and carrying a big knife on belt sheath may become less popular as time progressed.Right now the only two materials I see most often used for in-pocket organizer are condura and leather, and there is only one maker on Etsy is using sail mast which is ultra light weight and strong(but the design is average, and not too user friendly).
I am a big fan of sail mast because it is utterly weightless and thin, resilient, smooth(easy to pull/put gear back in) and breathable.
And about the new design:
What I like most about skinth/Metro offering is the 3d pocket, which is great for a regular folding knife(like BM griptilian) or a 3-4 layers SAK, but due to its smaller size, the options for pocket is limited, and it always rotate sideway in my cargo pants and render itself useless.

I love the larger size of Yellow Birch outfitters organizer, which naturally allows larger knife/tool to be carried. The slanted opening is brilliant and the field note pocket is great, since it will give structure to the whole organizer and keep it upright in the pocket. But their pocket is flat which really limits the carry of MT, and again only 2-3 pockets available.
Here are some current offerings from YBO:

I'd love to see is a lightweight sail mast in-pocket organizer which can host a field note at the very top middle compartment(which can keep the whole thing upright, especially in a cargo pocket), and one side with slanted, cascade of flat pockets in different sizes, while the other side with 2-3 slanted larger 3d pockets. So based on your tool selection of the day, you could have a wide variety of pockets to host them in.
I do like this idea. I have one of the Etsy paraglider material ones, which is the best Iโve found available to meet my needs but some improvements would be great. The paraglider/sailcloth is awesome because of it being lightweight and thin yet durable. A ripstop could also be nice and durable.
One of the faults with the current design is that although the height accommodates a CR123 flashlight and a 91mm SAK, it is really too short for a MT or 18650 flashlight or large single blade knife. Although, the Zipper pocket is nice, I can see where having the zipper go down the center like the yellow birch could be nice for easier access to what is in it.
Another aspect that could be nice if a solution was determined, would be an easy way to then attach to the belt without adding too much bulk. This would require both a belt attachment with loops or molle as well as a retention for the open pockets so the items would not fall out if moving around.
Another idea that could be real nice is a modular type of tool. A tool that could be easily modified as the situation required using a basic common driver. Something like how the LM Leap has the removable blade, the bladeless MP600 has the removable saw or even the KeyBar has tools that can be added. It would be great to be able to carry one tool that when you might have to enter a bladeless zone, you can easily remove the blade but then reinsert when done. If urban then file and bottle opener, but camping switch to firesteel and saw. Whether plier based or more SAK style, it could be nice to have the modularity that would require less knowledge and time to adapt to varying needs.

-
I'm not against another run of custom MTO knives from Victorinox, but I was looking to do something original, uniquely MTO. Anyone can rehash the same idea over and over again, paint it different colors and pretend it's something new, I'd like to see if we can actually come up with something new, because we are better than that.

Def
-
-
I would like a OPT that is not overloaded. Only: Prybar, slot for bits and wrenches (open end!).
For regular tools I see me more and more looking for something that supports torx screws. The only one coming to mind is the Cybertool, and I donโt have one of those.
Other than that I would like an MT that is more modular. Yes I know it is hard do, or the big 3 would have done that already. Would still be cool

-
@Nix said:
Leatherman came up with a solution to a problem.I sometimes think that Victorinox comes up with solutions that are in need of a problem.
If MTo is to make a tool.......or thing....what is the problem we want to solve?

That's well put. I am not against any project MTo plans to undertake collectively, but realistically, we gonna think about feasibility and economics.
I still think the hanky or pocket organizer are great executable ideas, and if done nicely, could get our name out on instagram/internet.
-
Gino88, though not a charter member, had a great idea I think worth considering:
/post/2066707
A 75-80 USD donation spreads into small monthly subscription fee, mean while, member gets 35-40usd worth of SAK or LM tool with exclusive color or special edition. It's a win-win for everyone.
-
@comis said:
Gino88, though not a charter member, had a great idea I think worth considering:/post/2066707
A 75-80 USD donation spreads into small monthly subscription fee, mean while, member gets 35-40usd worth of SAK or LM tool with exclusive color or special edition. It's a win-win for everyone.
If we had the up front cash to commission a run like that and then sit on it for whatever length of time we had to, it might be worthwhile.
Unfortunately at this time, we don't.
I had an idea the other day that I think we could all get on board with. What is the #1 problem with EDC stuff?
Someplace to carry everything.
Sure, you could get a Skinth or a Maxpedition bag or something, but what about a truly compact and customizeable EDC carry method?
I'm thinking we build a small box, similar to an Altoids tin, but with different features like:
- Waterproofing
- Interchangeable mounting option for belt clip, MOLLE, carabiner etc
- Removable bit holder so you don't have to carry a bit set with your multitool
- Internal removable dividers for organizing smaller items like FAK things or batteries for flashlights
I'm thinking it would be relatively easy to design a small box with a removable lid, have a recess in the lid for an O Ring to seal it and then use a silicone wrist band (or similar) to hold it shut.
It would be easy to prototype a few of them, send them around to get feedback and go from there.
Thoughts? I have others if this one doesn't turn anyone's crank.

Def
-
I like the box idea.
When I kayaked more regularly, often solo, I thought it would be a good idea to pick up a way to carry, protect, and preserve a cell phone. Back then I used a small flip-phone and this little box fit the bill (IIRC):

It is fairly small, but indestructible. The lid crushed the rubber liner down to make it waterproof. There is even a small pressure valve to accommodate a decrease in atmospheric pressure. Downsides are that it does not hold much for it's size and is also a bit heavy.

I think I ended up just chucking the phone in a roll-top dry bag.

Still the box idea is compelling because it offers more protection than a soft-sided solution.
-
Pelican or Otter Box is exactly where my mind went, too. Back when our phones weren't also our cameras, I carried my camera in one of these on paddle trips.
Personally, an MTO-branded thingie like this isn't inspiring to me, but if it supports the forum and Grant's amazing efforts at keeping this community going, I'd get one.
Myron
-
-
I was looking for a project we could all get a hand in- if the box idea isn't popular (and it sure looks like it isn't, judging by the landslide of responses! :D) then I am willing to keep looking.
I do have a couple of other projects in the works, and one of which I may ask for some help with eventually, but in the meantime, here are a few other concepts I have been bouncing around in my head for a while. See if anything here stirs any interest, and, if not, hopefully we can come up with some other ideas!
-
Pocket chainsaw- basically this would be a small chainsaw the same size as a small fixed blade knife. Figure 4-6" blade, battery and switch in the handle, powered by a drone motor.
-
Different Tread links- I floated this idea before and even did some basic design work.
Retractable Handcuff Key:

TreadLight:

-
EDC Holding wristband- many times I have been trying to fix something, which involved holding something with one hand while trying to grab a tool with the other. With this wristband idea, you'd have a 4 inch (or so) wristband with MOLLE straps on it so you could clip a tool, SAK, flashlight etc to it and always have your tools handy when you need them. You could also stick the flashlight to it, with it pointed towards whatever you are working on to have hands free light.
-
iEDC- basically a set of dice that would connect to a keychain. You could use them for gaming, passing the time or have the faces engraved with something like Leatherman, Gerber, Wenger, CRKT, SOG and Victorinox to help you decide what tool/knife etc to carry that day. and iEDC is an anagram of DiCE, so the marketing is already done!

-
Another repeat, the Multitool.org Pot Holder
Def
-
-
Okay, apparently those are some pretty bad ideas....

Def
-
-
@Grant Lamontagne said:
Okay, apparently those are some pretty bad ideas....
Def
Sorry for the super late reply.
The case idea is nifty, and I have a few 1010 and 1015 over the years. I think they are great if you have very delicate electronics that need to keep dry when I close to water, but day-to-day they are a bit too heavy duty for casual use.
-
I think that'd be great, just not sure whether cell phone sized battery has enough power to make the chainsaw powerful enough to cut anything.
https://www.youtube.com/watch?v=GyKOfFMWuFY
This one from Bosch looks decent, but with a much bigger battery, it still take a short while to cut thru a limb sized wood. -
Tread link, my 2 cents is the 'platform' is really niche, I have almost never seen people wearing one in real life, except on youtube.
-
Interesting, I think a wrist band carry method has great potential for people working in confined space or specialized use(caving, SAR, etc).
-
I am with Pacu, this is pretty cool and if you thread a hole thru the dice, it could even make it into some kind of Begleri or monkey fist.
-
I know many thru hikers have silicon made mini pot holder with them(shape like a kitchen mitten, but good for only 3 fingers), and I have seen many iterations of aluminium pot holders already existed over the years.
-
-
These are just ideas.... feel free to add your own!

Def
-
How about SAK scales with the Swiss Army Knight logo and writing? Would that be doable with 3D printing?
-
-
I think we should do something for the LM and Gerber fans too, but those are harder to customize

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better ๐
Register Login