Thinking of getting into building a new PC system.
-
Just went upstairs to look for some info on the power supplies built into my older systems and came across one of the boxes.
It is a Cooler Master Real Power Pro 1000W with the following specs:
Type: ATX form factor 12V V2.3 / SSI standard EPS 12V V2.91
PFC: Active PFC (0.99)
Input Voltage: 90 - 264V (auto range)
Input Current: 15A @ 115V / 8A @ 230V
Input Frequency Range: 47 - 63 Hz
Fan: Ultra silent 135mm fan with intelligent speed control
Power Good Signal: 100 - 500 ms
Hold Up Time: >17 ms
Efficiency (load): 83% (200W) / 85% (500W) / 81% (1000W)
MTBF: >100 000 Hrs
Output Capacity: 1000W continuous
Max Output Capacity: 1200W
Full Protection: OVP / OCP / OTP / SCP / UVP
Dimension: 150 x 180 x 86 mm
Operation Temperature: 0 - 50 C (normal input voltage)It states on the box:
Worlds first six + 12V rails for better power distribution in SLI and 2 way server system
Four 6 pin PCI-e / two 8 pin PCI-e connectors offer future upgradability
Eco-design for energy and money saving by Active PFC. (>0.99) / high efficiency (>85%)The power supply dates to 2007 as per the copyright info on the box.
I think that should do it? What do you guys think?

UPDATE:
I just found my other power supply, it is a Seasonic S12+.
-
These guys seem to expect a 10 year lifespan from power supplies:
https://forums.tomshardware.com/threads/power-supply-lifespan.1990238/ -
Long story short, I would be hesitant about trusting my new hardware to a 13 y/o PSU, even if it's more than powerful enough.
Especially if I might end up using the new hardware for another decade.....
-
One thing you need to make sure with the motherboard, if you're going for Gen 3 Ryzen, not all B450 MBs are equipped with BIOS that works with them, might need an upgrade.
-
I guess time will tell. I might end up buying a newer supply down the road.

AlephZero, I think the Max board is gen 3 ready BIOS wise.
-
Hmm..after looking into this more, it might appear I may have to buy a newer power supply after all. After doing a few online power calculators, I think something in the 700-750w range will do. Mind you, my current system is 7 years old and still going strong with the same power supply.
-
@Chako said:
Hmm..after looking into this more, it might appear I may have to buy a newer power supply after all. After doing a few online power calculators, I think something in the 700-750w range will do. Mind you, my current system is 7 years old and still going strong with the same power supply.Is that the estimated load or the estimated power supply size?
-
Based on the specs you posted it seems like a 80+ supply, but as others have mentioned it may be getting old too.
Unless you are on a tight budget or struggling to find a PSU that fits your needs/wants (I'd be looking for efficient and quiet) it makes sense to build the whole system. Also that as mentioned gives you an idea of the reliability of all the components rather than face having to replace something again in a few years because you didn't do it during the initial build.
All components have changed over the years, so mind as well have a level playing field to start.
-
The first one I mentioned is modular. A lot nicer and easier to work with.
-
I just got this one for my own system: https://www.anandtech.com/show/12821/the-bitfenix-formula-gold-650w-psu-review
They have different versions including 750W, but the 650W is well enough for me
non-modular, but I have nice little space in my case to hide the extra cables ;)
-
Just got the case in today, and I ordered the Ryzen 3600X CPU 20 minutes ago. Looking at Amazon, both the motherboard and the CPU should be coming in at around the same time...even though the motherboard was on back-order.

The list of what I need is slowly going down. Going to wait for my next pay period to advance the list. Thus far this is my need to get list:
- All in one water cooler.
- A power supply
- Memory
- m.2 SSD drive.
Looks like I have the most expensive gear out of the way now. Still researching memory, power supplies now, and m.2 drives. Thinking i might get the Deepcool Castle 360mm V2 model. It has RGB on it.
-
Just opened up the Thermaltake P3 case...I am happy to state the tempered glass panel is intact. Whew. I was a bit worried about that. The red is very nice.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Now this is feeling like a computer is slowly getting assembled. :woohoo:
-

Either 16GB, or 32GB, of DDR4 3000MHz should be perfect to take full advantage of your shiny Ryzen.
Luckily for you, the price of RAM went way down last year due to decreased demand. :D -
I am told both the CPU and motherboard will arrive today.
Still looking into SSD drives, memory, mechanical drives, power supplies, etc...
-
I just ordered off of Amazon an XPG DDR4 D60G RGB 16GB (2x8GB) 3200MHz kit. That should handle the system memory. I am still looking into power supplies. I have noted that the local Staples has the Samsung 2.5" 500gb SSDs for 90 dollars. I am a bit tempted...but not sure if I should hold out for a M.2 SSD drive.

-
My sytem is to old for M.2 or else I would have went that route
I would wait if it were me
You want the snappiest system you can get for now and it will last for much longer that way 

-
I hear you. I think I will go the M.2 route, and possibly get a SATA SSD drive as well, along with a larger HD for my main storage needs. That is the goal anyhow.
I just pulled the trigger on a Thermaltake Toughpower Grand RGB 750W Smart 80 Plus Gold power supply. I want this build to go all light fantastic, and the 10 year warranty and all Japanese caps attracted me to the power supply. Oddly enough, after using several calculators to figure out my overall wattage and adding an extra 100w, the 650W would have sufficed...but was oddly 10 dollars more than the 750W supply.

So far, what I think I still need are:
- A CPU cooler....still thinking on a DeepCool Castle 360 V2 model for the RGB bling.
- An assortment of HD/SSD/M.2 units. More specifically a 1Tb M.2 drive, a 500Gb SATA SSD 2.5" drive, and a 4Tb HD for main storage. I understand I can use StoreMI which partners a HD with the M.2 NVME drive for speedier access. Not sure how good that works.
- Possibly another Win 10 OS if I can't transfer my current copy over from my current rig.
-
You can find how to get the Windows 10 activation code with just a bit of Google Fu and maybe download an app to get the number
use a clean install and activate it with the number and you should be good to go 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login