Rust issue, not only leatherman
-
you know what, that actually sounds like a good idea, weve seen them using MT, at least i know id like to see them try that just for the sake of it :D
-
Anything I'd had from new of either brand hasn't rusted, but I've seen plenty of old neglected ones looking like cr*p. I don't put them through the kind of abuse that leaves them filthy or damp really o it's never been a big issue for me. Now I have a dedicated alox harvester for the allotment use, we shall see if that copes!
-
@Buzzbait said:
In the immortal words of Shakespeare, "What's in a name? That which we call a rose."I can see which one is the rose.
And which one works for a living, and which one is a shelf queen. A picture of one tool with rust the other without doesn't mean anything.
Funny all the vic fans just look directly over SOG mentioned, and the conclusion of it basically comes down to surface finish rather than brand/steel, and turned this into leatherman vs. vic.
-
I am a big LM fan and love their tools and have carried them for years, but I have to admit that there tools do rust more than other more polished tools. Not only that I have found that their newer tools rust more than their older line up. These 3 tools, LM Wave w/ KicK phillips driver, LM Charge AL, and Vic Spirit w/pocket clip are my most carried tools. I use them hard in and around cleaning chemicals at work and get good results with all three of them. I have to say that I have gotten really bad at cleaning them after using them. When I decide to use a different tool I usually just throw them in the tool box and pick up another. For that past 2 weeks or so I have been carrying a LM Pulse so this thread made me dig out these three tools and take a look at them. This is what I found.
LM Wave




LM Charge AL




Vic Spirit

Beautiful Spirit rust free yes? No..... but still not as bad as the LMs



-
@jzmtl said:
And which one works for a living, and which one is a shelf queen. A picture of one tool with rust the other without doesn't mean anything.Both work for a living. The Micra has been attached to the outside of my backpack for the last year or so. The Swisschamp is new. I do have a Vic Huntsman that was clipped to my backpack for 5 years before the Micra. It looks as good as my new Swisschamp.
-
@prime77 said:
I am a big LM fan and love their tools and have carried them for years, but I have to admit that there tools do rust more than other more polished tools. Not only that I have found that their newer tools rust more than their older line up. These 3 tools, LM Wave w/ KicK phillips driver, LM Charge AL, and Vic Spirit w/pocket clip are my most carried tools. I use them hard in and around cleaning chemicals at work and get good results with all three of them. I have to say that I have gotten really bad at cleaning them after using them. When I decide to use a different tool I usually just throw them in the tool box and pick up another. For that past 2 weeks or so I have been carrying a LM Pulse so this thread made me dig out these three tools and take a look at them. This is what I found.LM Wave




LM Charge AL




Vic Spirit

Beautiful Spirit rust free yes? No..... but still not as bad as the LMs



Great pictures mate

-
Great post jzmtl
The whole " Leatherman Rust , Vics don't " thing is starting to wear a little thin so its nice to see some other brands catching the rust flu :D For the record I have got a Swisstool to rust and it was right near the springs in the handle and was really difficult to remove :( Lets not forget Gerbers , they rust very easily too .dunc
-
Lets not forget Gerbers , they rust very easily too .
Compared to Gerbers, Leathermans are virtually rustproof. :D :D :D
indeed...when I had a suspension, it rusted within a week, never taken around water either...
-
That's probably because the Suspension design was inspired by the suspension bridges in Oregon and we all know how bridges and water/moisture always go together. ::)
-
Lets not forget Gerbers , they rust very easily too .
Compared to Gerbers, Leathermans are virtually rustproof. :D :D :D
My gerber I used to have did rust and the E4 Squirt also.
-
Funnily enough neither my MP600 or Diesel have rusted, nor has my Clutch for that matter :)
-
Lets not forget Gerbers , they rust very easily too .
Compared to Gerbers, Leathermans are virtually rustproof. :D :D :D
My dad's Gerber has rust and it's spent almost all its life sitting indoors in its box -it's certainly never got wet :(
-
My BO Gerber Scout has hardly a lick of rust on it, and it is the multitool that I use specifically for fishing. The BO coating must be very good.

-
Lets not forget Gerbers , they rust very easily too .
Compared to Gerbers, Leathermans are virtually rustproof. :D :D :D
::) ::)
-
-
@ducktapehero said:
Compared to Gerbers, Leathermans are virtually rustproof. :D :D :D::) ::)
What? They do rust bad. I was looking at one is a store and it friggin rusted away while I was looking at it!!!!
OK I lied, they're not that bad. I just find it amusing how people get offended when someone talks bad about their choice of multi-tool. We all know that Vic Spirit's are the closest thing to God-like perfection the human world will ever know but if your Leatherman works for you then carry it and enjoy.
As I've said before, I own an engraved Spirit with a pocket clip(Thanks again J-sews). It truly is one of a kind. As such I find it difficult to wear it out of the house too much. Until Victorinox gets around to putting pocket clips on their MT's, I'm considering getting a LM Kick with a pocket clip to carry around. It's a fine tool and if I lose it or break it(or it rusts away as LM's are known to do ;) ), it's no big deal.
I know Leatherman's and Gerber's don't rust that bad, I just couldn't resist saying it :D :D :D Luv ya guys!!!! In a manly sort of way of course.
-
Compared to Gerbers, Leathermans are virtually rustproof. :D :D :D
::) ::)
What? They do rust bad. I was looking at one is a store and it friggin rusted away while I was looking at it!!!!
OK I lied, they're not that bad. I just find it amusing how people get offended when someone talks bad about their choice of multi-tool. We all know that Vic Spirit's are the closest thing to God-like perfection the human world will ever know but if your Leatherman works for you then carry it and enjoy.
As I've said before, I own an engraved Spirit with a pocket clip(Thanks again J-sews). It truly is one of a kind. As such I find it difficult to wear it out of the house too much. Until Victorinox gets around to putting pocket clips on their MT's, I'm considering getting a LM Kick with a pocket clip to carry around. It's a fine tool and if I lose it or break it(or it rusts away as LM's are known to do ;) ), it's no big deal.
I know Leatherman's and Gerber's don't rust that bad, I just couldn't resist saying it :D :D :D Luv ya guys!!!! In a manly sort of way of course.
I don't get offended. I just find it amazing how much crap you swiss MT lovers can spread. I know what a good MT is and whats not. I know what works best for me. I just don't feel the need to tell everyone all the time. Not sure why you swiss lovers feel the need to. And the Spirit perfect? What a joke(IMO). The first spirit I bought had the loosest plier head I have ever seen on a new MT. It may be the best swiss made MT(much better than the Swisstool) but certainly not the best MT made(IMO).
And by the way. I have used the same Gerber for close to 10 years and there is no rust on it :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



