ZapWizard's Leatherman Free P4 Mods
-
Trust me you don't talk as much as me
Our mobile site running the Sunrise theme is so much better than Tapatalk, so think about using that instead 
Megan is our marketing person for social media amonst other things and also Grant's (our site owner) significant other
She was at SHOT 2020 this year for us as well and we got a great firsthand look at several new things from several companies 
-
@Happy Gilmore said:
Horizontal holster would be my jam as well, your almost my singluar driving reason to consider the P4 at this point lol.- I’ll admit, I’m a big ol’ fatty. My love handles make vertical carry uncomfortable.
@Happy Gilmore said:
Love it, any chance of a horizontal holster version?

After another request from a Shapeways customer; I finally designed the horizontal carry option for the FREE P2 and P4.
It doesn't have any extra bit/extender options, as no matter what I did they just didn't fit well. Also only one belt size, as I don't trust an open clip on a larger duty style belt.
Now available in both Left or Right carry. -

Just a few thoughts...
- Would a metal belt clip be an option...?
- ... and would this not make a bit extender slot a possible add-on option too...?
Just asking...

-

After another request from a Shapeways customer; I finally designed the horizontal carry option for the FREE P2 and P4.
It doesn't have any extra bit/extender options, as no matter what I did they just didn't fit well. Also only one belt size, as I don't trust an open clip on a larger duty style belt.
Now available in both Left or Right carry.Lordy Lordy, mercy me!
That is beautiful!
Three questions come to mind, immediately, because let’s face it...that’s how we work!
-
- What size belt did you design this for? My eyes tell me, based on dimensions, that it will fit perfectly on a 1.5” belt. Which is my standard.
——————————————————————
Now available in both Left or Right carry.
-
- Does this mean I can go spend money right now?!?
——————————————————————
-
- Now that you’ve “conquered” this “demon” do you think you’ll design this style for the Wave+ and Surge? :selfish:
Thank you, once again, and always!
If I had the brainpower, and/or the means, I still wouldn’t be able to create/design the wonders you’ve bestowed upon us!
I grovel at your throne, Lord ZapWizard!
HUZZAH!
P.S. I may, or may not, have achieved a “Val Kilmer as Doc Holliday in Tombstone circa 1994” level of drunken-ness...
You decide. Don’t be fooled by my literate typing.
]^{]^{£^{7£{7]{|]{]|
Hahghagjhskgukxgoux
(#*’hgkhsfhghkggljshljsjbkjHint...I DID / AM that drunk. I am, indeed, your Huckleberry.
-
-
Grat job on that sheath, Zap :o

-
- Would a metal belt clip be an option...?
- ... and would this not make a bit extender slot a possible add-on option too...?
The metal clips requires Chicago screws, which don't line up with the tool pocket very well. At least not without major modifications.
I did think of putting the bit-extender on the bottom side, I may look at that in CAD. Since the FREE series is symmetrical it should work.@hbcorpse said:
Three questions come to mind, immediately, because let’s face it...that’s how we work!-
- What size belt did you design this for? My eyes tell me, based on dimensions, that it will fit perfectly on a 1.5” belt. Which is my standard.
-
- Does this mean I can go spend money right now?!?
-
- Now that you’ve “conquered” this “demon” do you think you’ll design this style for the Wave+ and Surge? :selfish:
- I have settled on a "BDU" belt size as my default for the regular loop and plastic clip. This is a military regulation size, and is 1.75" tall. I use this size on the 1.5" leather belt I wear daily.
- Yes, the link to the shop is in my signature.
- Probably not for the Wave/Charge/Surge. At least not until I have enough requests that it makes sense to put in the time. Their holsters aren't as nice and symmetrical as the FREE series.Why does that matter: Because I have to make the CAD model highly modular, such that I can boolean add/subtract common components to build up a new configuration. You see I now have several dozen unique configurations, each time I add a new config, if I change anything with a base component the amount of items I have to re-export and update goes up exponentially. For example I had to recently update the Surge holster to accommodate the new Thumb tabs. This meant I had to update 8 different unique combinations. (Also the Surge is quite heavy, and gravity is needed to help hold it in.)
-
The BDU belt is perfect! I wish OuterBox had gone with that size for my IPhone case

-
Not to hijack the thread, but I would like to see a finer replacement for the file. It is way to course for my use. Your other mods look great.
-
Welcome to
Bob 
-
Here I am, debating between the Charge and the Free P4 for my next purchase, and it looks like you've solved the only two issues I had with the Free: the lack of bit driver and (soon) the tiny file. By the way, would there be any issue with removing one of those spacers in the middle of the tool to make room for the bit driver? I was considering keeping the Phillips head, but removing the Prytool, plain edge blade, and the spacer in between those two to get the .26" of clearance necessary to make room for the bit driver. I already carry a knife as part of my EDC so I don't care about losing the plain edge.
-
@asorel said:
By the way, would there be any issue with removing one of those spacers in the middle of the tool to make room for the bit driver?You can alter the stack-up however you want, but if your referring to the springs, they must be on placed each side of the bit holder, I use the precious extra space they provide. With the springs included, the bit driver takes 0.32" of tool space.
See here for the stackup diagram.
Small update:
I ordered the newest T-Shank design, it should arrive in the next week or so. Sometimes Shapeways is very fast, sometimes they take a few weeks. -
Welcome to
asorel
Zap is good at what he does for sure
Hope you end up with a MT you really enjoy 
Hoping for the best with the newest revision of the T-shank adapter


-
@ZapWizard said:
You can alter the stack-up however you want, but if your referring to the springs, they must be on placed each side of the bit holder, I use the precious extra space they provide. With the springs included, the bit driver takes 0.32" of tool space.
See here for the stackup diagram.
Small update:
I ordered the newest T-Shank design, it should arrive in the next week or so. Sometimes Shapeways is very fast, sometimes they take a few weeks.Yeah, looking again at the stack-up diagram, I did mean the springs. I'll keep those in, then, and figure out something else to remove. One more thing, if you wouldn't mind me asking--you mentioned in your OP plans to laser-etch a ruler on the inside of the scales. Obviously, that isn't something you can sell on Shapeways, but how has that project been going? If it's a viable replacement for built-in ruler, I may be willing to eschew that part so that I might fit some of your mods in.
ETA:
@Poncho65 said:
Welcome to
asorel
Zap is good at what he does for sure
Hope you end up with a MT you really enjoy 
Hoping for the best with the newest revision of the T-shank adapter


Thanks! MTs are an interesting hobby, but the prospect of modding them really adds a new level of depths to it. Really looking forward to whatever ZapWizard comes up with next.
-
Somewhat related to my last question--if you all were to remove the plain edge blade from the Free P4, with what would you replace it with? It's .1" thick rather than .07, so you'd have to use a washer of some sort in order to use one of the tools from the other side.
-
@asorel said:
you mentioned in your OP plans to laser-etch a ruler on the inside of the scales. Obviously, that isn't something you can sell on Shapeways, but how has that project been going?I put in the plans as the~1/8" of flat space on each side of the scales seems to be begging for a ruler. You could fit a 7" ruler there if you ignore the ends of the tool, or 8.8" if I include the length to the ends.
So we have a laser-etcher here at work. For it to do metal you have to coat the metal in Cermark, etch that, then wash it. So I would need to take apart the tool, and build a jig to hold the scales in place. My CAD models are accurate enough I can probably 3D print a jig.I haven't done it yet as I just haven't gotten around to it. (Perhaps I should laser-cut one of those.)
@asorel said:
Somewhat related to my last question--if you all were to remove the plain edge blade from the Free P4, with what would you replace it with? It's .1" thick rather than .07, so you'd have to use a washer of some sort in order to use one of the tools from the other side.I am not sure what I would put in its place. I use the straight blade a lot
The good news is that the washers just need a somewhat common 1/8" inside diameter, and you can get precision shims to fill in stuff from McMaster. -
@ZapWizard said:
I put in the plans as the~1/8" of flat space on each side of the scales seems to be begging for a ruler. You could fit a 7" ruler there if you ignore the ends of the tool, or 8.8" if I include the length to the ends.
So we have a laser-etcher here at work. For it to do metal you have to coat the metal in Cermark, etch that, then wash it. So I would need to take apart the tool, and build a jig to hold the scales in place. My CAD models are accurate enough I can probably 3D print a jig.I haven't done it yet as I just haven't gotten around to it. (Perhaps I should laser-cut one of those.)
I am not sure what I would put in its place. I use the straight blade a lot
The good news is that the washers just need a somewhat common 1/8" inside diameter, and you can get precision shims to fill in stuff from McMaster.Gotcha. The disassembly requirement sounds like I couldn't apply it as easily as simply sending my P4 over to a third party laser etching service.
-
@asorel said:
Gotcha. The disassembly requirement sounds like I couldn't apply it as easily as simply sending my P4 over to a third party laser etching service.There are ways to do a DIY acid etch, if you can trust yourself and/or your hands to transfer the measurements/markings over properly...maybe stick with a quarter inch scale, so as to have less markings to transfer?
-
@fullbreakfast said:
I don’t really have anything to add to this thread other than saying that it’s indescribably awesome and ZapWizard is a legend.

-
Zapwizard, based on your CAD drawings of the Free P4, is it possible to move the four "main" tools around to different mounting points, or is there some asymmetry under the scales that prevents this? Could I swap the locations of the straight blade and serrated blade, for instance?
-
@asorel said:
is it possible to move the four "main" tools around to different mounting pointsThe free series is totally symmetrical, and the movement profiles are all the same. You can swap tools around as you want. (as long as your total thickness on each side remains the same)
There are two thick washers that are behind the scales, this is because the scales have that raised shiny portion. You just need to keep those in place. The scissors have two parts, if you move it to the other side you will have a hard time griping it to deploy them.
The springs don't have to be dead center to work, they are offset somewhat on the FREE P2, but evenly spacing those is best.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login