Thinking of getting into building a new PC system.
-
Ok...after looking very closely at the RGB set up on the DeepCool cooler and the GPU bracket, and what is offered on the motherboard, I have come to the conclusion that I neglected the whole RGB issue. From what I can see and tell, RGB on computers are a mess. I assumed that everything was a standard, but I couldn't be further from the truth. I figured that if the item was MSI Mystic Light compatible, that all was good. I was wrong. Apparently, the two RGB hookups on the MSI Tomahawk Max motherboard are 12V 4 pin RGB hookups designed for light strips. The Set up that came with the DeepCool cooler is 3 pin Corsair type addressable RGB. The GPU bracket is another type of 3 pin addressable RGB set up. Now, the DeepCool comes with an adapter that allows me to get power via a SATA connector, and comes with a small inline remote to control the RGB. Disappointed that I won't be able to control everything via the MSI software. I will have to go this route because the other two adapters are for the two types of 3 pin addressable RGB headers. My board only supports the 12V non-addressable RGB 4 pin setup.

Looks like I won;t be able to power the GPU bracket because it is a different 3 pin setup from that used on the CPU cooler.
Looks like there are too many holes for the unwary to fall into when it comes to RGB stuff. I am tempted to remove that GPU bracket as my reason to get it was to add more lighted components to the build. Looks like I will have to use the built in remote to control the DeepCool RGB system. So much for keeping things simple.
-
At least the computer will be just as fast without RGB.
Right? .... right? -
Not sure, I do believe red is always faster.

The good news, no sparks, bangs, and puffs of smoke when first turned on.
Just installed Win10 on the computer, but have run into a bit of an issue. I know I should have brought my portable DVD player from work. I am right now downloading the TP Link WiFi 6 drivers onto a USB stick and will attempt to transfer said drivers to the new computer. Right now, I do now have any internet and that is causing me a bit of an issue. :D
Also noted, the RGB on the CPU Cooler is not operating right now. Not sure if I wired that in wrong, or what is going on. Will look into that after I get the OS up and running.
-
I am rusty as all get out. I could only see the one drive, and not the others. I went online and quickly found out that I had to get into disk manager and initialize them. That was a 2 minute stumper that got fixed right quick.

Win 10 installed with no issues after installing the Wifi drivers via USB, and I finally figured out why I wasn't getting any RGB on the CPU cooler. I rechecked all of my connections, and sure enough, one of the RGB fan connectors was sitting on only 2 of the 3 pins. That one had me going around in circles for a good half hour, thinking that the remote was defective. Now it works.
Those XPG Dimms and M.2 drive sure are pretty.
<a href="https://flic.kr/p/2iwiMwD" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49569722541_509c461fdc_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8230A by Chako, on Flickr
You can see the graphics cards has a line of RGB goodness. I was surprised it actually shifts colours much like the two XPG items. The power supply also has a bit of RGB, and that is controlled via a rear button that scrolls through all the different settings. I have this one going rainbow colour shifts so that it has the same general vibe as the other gear.
<a href="https://flic.kr/p/2iwgdv9" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49569221218_99cab26c67_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8232A by Chako, on Flickr
Finally got the DeepCool running RGB wise. A bit disappointed that it won't sync with the motherboard software, but I also have this going on colour shifts so everything sort of makes a general theme. Overall, looking good.
<a href="https://flic.kr/p/2iwgdsP" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49569221083_2f984a123e_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8234A by Chako, on Flickr
<a href="https://flic.kr/p/2iwgdqz" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49569220953_f97056c2a7_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8236A by Chako, on Flickr
Now all that is left to do is continue adding software to this build...which will necessitate getting that blueray DVD portable drive from work. I might have to keep it here for future DVD installs, and stuff. I thought I might get away without one, but I still have important software that comes that way such as my Office suite (I hate office 365 that we use at work), and Corel PhotoPaint 2020 copy, After that, I will have to install the back plate, the front tempered glass panel, and install the VESA wall mount.
-
I am so happy at the moment. Despite a few hiccups towards the end, it went fairly smooth. The hardest part of this build was figuring out the RGB landscape. I spent a few hours trying to figure out where to put the fan power module, RGB module, and the attached inline control module. Trying to make all that cabling look ok was a challenge.
I might also add that figuring out the + and - on the front panel hookups was an issue on the P3 case. MSI gave excellent instructions on where to hook up the power button, reset button, HD lights, etc. However, Thermaltake failed somewhat in not clearly marking which was the positive and negative on some of the connectors. This was made all the more difficult when Thermaltake decided to use the same wire colour for both. Some connectors were properly marked...and others, was a guess. I did ok as I only had to do this once...but it did take more time then I was used to in past builds.
-
Looks great! Hope this system runs smoothly for years to come

-
I hope so. At least I was able to upgrade Win 10 with no issues unlike my older system.
Still trying to figure out where on the wall it will go.
-
dunno how it is for you, but I love the hell out of the speed off my NVMe drive...
-
I still am using the older system until I can figure where it is going on the wall. Looks like I may have to move my HO train wall display case. What I can say...fastest Win 10 install ever.
-
Just mounted the computer to the wall. It looks fantastic when the room lights are turned off. Currently testing everything out and it all appears to work good so far. I did bring my portable blue ray player home but haven't installed any software from it as of yet. This 60% keyboard is going to need some serious getting used to. I think I will have to go upstairs and hunt for my external card reader as this build does not have one. Photos will have to come at a later time, not tonight.
-
Something unforeseen. I found an old Sandisk 6 in 1 card reader and thought that would do the job. I forgot it is pre SDHC and will not work with my SD card. Guess I will now have to buy a card reader. I am certain I have another somewhere with my camera gear but can't seem to find it for love or money.

-
I bought a new card reader and am happy to state that worked beautifully. Here are some more photos. The DK63 Dierya keyboard has this mesmerizing RGB wave that flows from the i key. It is a bit too beautiful to see that I find myself just watching the light show.

Here is the VESA mount on the back of the computer.
<a href="https://flic.kr/p/2iysPcT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49594117181_0d86c7ce76_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8238A by Chako, on Flickr
Testing the computer before installing the front tempered glass panel.
<a href="https://flic.kr/p/2iyqfy2" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49593617113_05c6c485a8_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8239A by Chako, on Flickr
Computer on the wall. This really does free up a lot of space.
<a href="https://flic.kr/p/2iyu58d" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49594362482_78f4677583_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8241A by Chako, on Flickr
<a href="https://flic.kr/p/2iyu57m" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49594362432_c833936a5b_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8242A by Chako, on Flickr
I am not thinking of ways to clean up all the wires going to the computer. That and an upgrade to a WiFi 6 router down the road.
I am very happy with how this turned out.

-
congrats.Now how many fps do you get in Minecraft and Fortnite? :D
-
Not sure. I do not play either lol,
I recall buying 3D Mark back in 2016. Just updated the appropriate newer test called Time Spy and ran the new system through it. Thinking I would like to run the older system through the same test. Either way, this new build received a 3D mark using the 64bit version of Time spy of 6338. A graphics score of 6182, and a CPU score of 7402. When I checked the results online, 3D Mark stated that my system is better than 55% of all results. Not bad for a not top end build. What I do know is that this system is a lot better than my older 2013 computer system.
It also looks great on a wall. :D
-
laptop scores 3553, 3434 graphics, 4427 CPU.
no where near the same league, but portable.
-
Got up this morning and did not turn on the lights. Thought I would take another photo.
<a href="https://flic.kr/p/2iyWS8g" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49599590141_e43a3b4d06_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8243A by Chako, on Flickr
I really wished that the GPU bracket worked on this system. It would have been nice to put some more light under the card to fill up that dark spot. With that said, some of the colour schemes are a bit distracting, especially the flashing or strobeing versions. I need to read up on where to find the MSI Mystic Light utility. I haven't as yet found it from all the apps installed from the motherboard DVD.
-
I got a bit worried when I just noticed that my dual fans on the ASUS GTX 1660 Super were not spinning. A quick look online told me this is apparently normal. They should only start running when the card hits 60 degrees. :ahhh
-
So far, the build is working very good. No issues with Window 10 updates. Likewise, those M.2 NVME drives are extremely fast. I have never seen a computer boot so quickly. I am now running all of my Steam games off of a regular SATA SSD, and have noticed a big improvement in game loading compared to a standard regular HD.
Here is the latest addition, a metal Star Wars At-At Walker.
<a href="https://flic.kr/p/2iEp8pC" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49661296942_d0234108b2_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8282A by Chako, on Flickr
<a href="https://flic.kr/p/2iEjVnq" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49660475998_89760eae20_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8283A by Chako, on Flickr
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login