Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Free P4 pliers stiffness after moderate or heavy use

Scheduled Pinned Locked Moved Leatherman Tools
154 Posts 1 Posters 24.9k Views
  1. Home
  2. Tool Talk
  3. Leatherman Tools
  4. Free P4 pliers stiffness after moderate or heavy use
Free P4 pliers stiffness after moderate or heavy use
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • tango44 Offline
    tango44
    Posts: 452
    tango44 Offline
    tango44
    wrote on last edited by
    #54 Quote Reply

      This guy from italy posted a video yesterday:
      https://youtu.be/1yBwF6Io6KU

      1 Reply Last reply
      • SirVicaLot Offline
        SirVicaLot
        Posts: 5,979
        SirVicaLot Offline
        SirVicaLot
        wrote on last edited by
        #55 Quote Reply

          This is ridiculous for a tool in that price range :facepalm:

          And LM customer support telling customers to whack their tools is even more so :facepalm:

          1 Reply Last reply
          • McStitchy Offline
            McStitchy
            Global Moderators
            Posts: 19,785
            McStitchy Offline
            McStitchy
            Global Moderators
            wrote on last edited by
            #56 Quote Reply

              Thanks for the video link tango 44
              :iagree: :facepalm:

              1 Reply Last reply
              • nitram Offline
                nitram
                Posts: 360
                nitram Offline
                nitram
                wrote on last edited by
                #57 Quote Reply

                  I fixed this issue with some very thin polishing compound. Applied a bit to the pivot and opened and closed the pliers for quite a while. When they got to feeling nice and smooth again I flushed them very well with WD40.

                  1 Reply Last reply
                  • Max Stone Offline
                    Max Stone
                    Posts: 5,982
                    Max Stone Offline
                    Max Stone
                    wrote on last edited by
                    #58 Quote Reply

                      Well...after 3 days of on-and-off ‘exercise’, including pressing some automotive abrasive into the pivot, I get beautiful free swinging pliers...until I squeeze them, and they bind up again. :facepalm:

                      There’s clearly an engineering geometry issue at play here. Not something I’m going to be able to fix, so it’s going back the shop. :-[

                      They can send it in for warranty. Hopefully I don’t get it back whacked, but I get one that works.

                      Have done a video here https://youtu.be/NFsneeJLltc showing that I need over 500g of pressure to close the pliers when they bind, and that after a wiggle, they are free again. Not acceptable Leatherman. :twak:

                      DCBB4B5B-8296-4746-80BD-79D1826C987E.jpeg

                      1 Reply Last reply
                      • Don Pablo Offline
                        Don Pablo
                        Posts: 15,329
                        Don Pablo Offline
                        Don Pablo
                        wrote on last edited by
                        #59 Quote Reply

                          That smurfing sucks >:(

                          1 Reply Last reply
                          • nitram Offline
                            nitram
                            Posts: 360
                            nitram Offline
                            nitram
                            wrote on last edited by
                            #60 Quote Reply

                              I’ll give mine a really hard squeeze tomorrow to see what happens. Maybe I didn’t fix it after all?

                              1 Reply Last reply
                              • AimlessWanderer Offline
                                AimlessWanderer
                                Posts: 17,518
                                AimlessWanderer Offline
                                AimlessWanderer
                                wrote on last edited by AimlessWanderer
                                #61 Quote Reply

                                  If I had to guess (and without taking an angle grinder to one, that's all I can do), I'd say it's due to the shave of the void that the plier rivet is formed into. Specifically, having too obtuse an angle at the bottom of the void.

                                  Excuse the quality of the attached sketch, it was just freehand. Note on the top illustration, the void is a 90o countersink. This leaves a 45o angle on rivet and plier head from the plane on which the two halves of the plier head rub. Squeezing the pliers forces each half of the plier head in a shear action onto either side of the rivet, wedging the upper plier half between the lower plier half, and the 45o angle of the rivet head. At 45o or larger, the head shouldn't lock.

                                  On the second illustration, a 120o or larger countersink, would leave a 30o included angle or less between mating plier faces and the rivet head. The smaller that angle, the more it will lock up like a Morse taper. Polishing it won't help either. It will just increase the amount of surface area in contact, and possibly make it worse - unless the vertical play is greater than the horizontal play.

                                  This is all purely speculative, and one would hope that a 30+ year manufacturer of pliers wouldn't make such a fundamental error, that the numpty typing this, who's never made a pair of pliers in his life, can spot. :whistle:

                                  So, as I say, this is complete guesswork, and I might be barking up a lamppost, mistaking it for a tree. If however I am right, this needs a fundamental redesign. As for fixing pliers you already own, the only solution I can think of is to stretch/sprain the rivet pin, so those two faces are slightly too far apart to jam up in. However, this would also adversely affect wire cutting, particularly on fine stranded wire.

                                  IMG_20200310_211958_edit_885_900.jpg

                                  1 Reply Last reply
                                  • AimlessWanderer Offline
                                    AimlessWanderer
                                    Posts: 17,518
                                    AimlessWanderer Offline
                                    AimlessWanderer
                                    wrote on last edited by
                                    #62 Quote Reply

                                      Note, a bent rivet pin could lead to the same issue, but without knowing which way it's bent, you wouldn't know where to whack it to improve matters.

                                      1 Reply Last reply
                                      • Max Stone Offline
                                        Max Stone
                                        Posts: 5,982
                                        Max Stone Offline
                                        Max Stone
                                        wrote on last edited by
                                        #63 Quote Reply

                                          I see you reasoning AL. It does appear the halves are getting pressed together, probably as a result of the countersink head exerting a force at an angle to the squeezing plane.

                                          I do see this as an engineering flaw, as this cannot be considered QC oversight or random defect. It's baked into the design, as far too many are reporting the issue.

                                          It means that I could never recommend the P2 or P4, unless Leatherman came out with a statement/recall addressing the issue.

                                          Very sad, as even with all its problems (magnets, tool/blade deployment, handle hot spots, poor balance, clackety noise), it's grown on me. :D

                                          1 Reply Last reply
                                          • AimlessWanderer Offline
                                            AimlessWanderer
                                            Posts: 17,518
                                            AimlessWanderer Offline
                                            AimlessWanderer
                                            wrote on last edited by
                                            #64 Quote Reply

                                              If I was going to attempt to fix them, here's what I would try...

                                              WARNING! THIS MAY DESTROY THE PLIERS!!! :dwts:

                                              ... don't say you weren't warned! :pok:

                                              Firstly, get the pliers the right way up. On one plier half, the rivet stays fixed to the head, and on the other half, the head pivots around the rivet. You want the fixed side down, and the moving side up. With the pliers open, support the uppermost half of the pliers only. Vice jaws might be the easiest way. If you wallop the rivet in this position, both the pivot and lower half of the jaws can move downwards. (see attached pic)

                                              In order to direct the force accurately, I'd use two ball pein hammers. One would be placed ball down, directly in the centre of the rivet, with the hammer face pointing up. When you slap that face with the second hammer, the ball will force into the centre of the rivet, hopefully distorting it enough to create a little more play between the two mating plier faces.

                                              BUT THESE ARE CAST PLIER HEADS, AND YOU MIGHT SNAP A JAW OFF! :ahhh

                                              In effect, this is a reversal of the repair where you use a centre punch around the periphery of the rivet head, to reduce that working space in which the movable jaw turns. You want to try to create a little more space, so it doesn't jam up. Just like with the centre punch repair, you don't want to bray the life out of it and end up clamping the two halves solid, just bed it in gently, a little at a time, and check often.
                                              **
                                              IF YOU BUST THEM AND VOID THE WARRANTY, DON'T COME RUNNING TO ME!!!**

                                              Three warnings should be enough, I reckon :D Obviously, this all works on my assumption on what the underlying problem is, which may or may not be correct :think: The safest option (and recommended course of action) is of course to send the smurfing things back to the smurfing muppets that smurfed them up in the first place!!!

                                              IMG_20200310_223959_1067_800_edit.jpg

                                              1 Reply Last reply
                                              • Don Pablo Offline
                                                Don Pablo
                                                Posts: 15,329
                                                Don Pablo Offline
                                                Don Pablo
                                                wrote on last edited by
                                                #65 Quote Reply

                                                  Beautiful and clear diagrams, Al. :2tu:
                                                  If locking taper ever comes up in school I'll think of your diagram. :D

                                                  1 Reply Last reply
                                                  • McStitchy Offline
                                                    McStitchy
                                                    Global Moderators
                                                    Posts: 19,785
                                                    McStitchy Offline
                                                    McStitchy
                                                    Global Moderators
                                                    wrote on last edited by
                                                    #66 Quote Reply

                                                      As do I :D
                                                      Your theorie is sound Al :tu:

                                                      1 Reply Last reply
                                                      • Olives666 Offline
                                                        Olives666
                                                        Posts: 97
                                                        Olives666 Offline
                                                        Olives666
                                                        wrote on last edited by
                                                        #67 Quote Reply

                                                          Had the same problem with the pliers seizing on my P2, but I also had the same problem with pliers seizing when pressure applied with my Rebar, Wave Gen 2, Wave plus, Charge Plus and Surge to name a few. Older Leatherman pliers ie- Fuse, OG Supertool, gen 1 Wave, etc don’t have that problem at all.
                                                          I managed to fix all my troublesome pliers, inc the Free P2 by clamping one side of the plier’s jaws in a vice(with pads) and using a hammer and large punch or flat drift to hit either side of the pivot on the inside of the unsupported plier. Also applying heat via a heat gun or gas to the pivot area prior to tapping the sides of the plier. Therefore freeing up the pliers. Each time checking the pliers along the way by squeezing the pliers to check for seizing, until it gets to a point where they don’t seize up anymore.
                                                          Also while heating the plier head I added a decent oil - I used wet finish line chain oil or Morgan blue race oil (medium thickness) and worked it into the pivot on both sides and into the plier from all sides, while hot and working the pliers up and down while one side clamped in the vice. Then wait for it to cool down, clean up then relive with a decent fine lube/oil.
                                                          Pain to do but they now run smooth with no play.

                                                          1 Reply Last reply
                                                          • Olives666 Offline
                                                            Olives666
                                                            Posts: 97
                                                            Olives666 Offline
                                                            Olives666
                                                            wrote on last edited by
                                                            #68 Quote Reply

                                                              I also removed the replaceable cutters so they didn’t interfere with each other when the pliers were closed more, otherwise you’ll damage the cutters/pliers when trying to tap apart/free up the pliers.

                                                              2442A2D6-9BE0-43EC-B38A-E5075B626696.jpeg

                                                              1 Reply Last reply
                                                              • nitram Offline
                                                                nitram
                                                                Posts: 360
                                                                nitram Offline
                                                                nitram
                                                                wrote on last edited by
                                                                #69 Quote Reply

                                                                  @AimlessWanderer said:
                                                                  Polishing it won't help either.

                                                                  You might be on to something. I did what any sane tool enthusiast would do. I grabbed my morning coffee, my P2 and some thick steel wire and started cutting and bending. You are right, it's very tight once again.

                                                                  This is disappointing, especially for a tool at this price point.

                                                                  I bought this one right after they went on sale here. Do we know if this only happens to early production runs? Probably not if it really does turn out to be a design flaw.

                                                                  1 Reply Last reply
                                                                  • AimlessWanderer Offline
                                                                    AimlessWanderer
                                                                    Posts: 17,518
                                                                    AimlessWanderer Offline
                                                                    AimlessWanderer
                                                                    wrote on last edited by
                                                                    #70 Quote Reply

                                                                      Although me and Olives666 have offered two different methods of stretching the rivet slightly, I would still recommend returning the defective tools to Leatherman wherever practical to do so. If customers continue to accommodate their failings, Leatherman will be under little pressure to make the necessary changes to ensure this doesn't happen again. For the money their tools sell for, they should be right when they come out of the box, and nobody should have to bash anything with a hammer. The more tools that are returned to them, the higher the incentive for them to address the root causes, and stop sending out tools with these kind of issues.

                                                                      1 Reply Last reply
                                                                      • SteveC Offline
                                                                        SteveC
                                                                        Global Moderators
                                                                        Posts: 73,535
                                                                        SteveC Offline
                                                                        SteveC
                                                                        Global Moderators
                                                                        wrote on last edited by
                                                                        #71 Quote Reply

                                                                          :iagree:

                                                                          1 Reply Last reply
                                                                          • tango44 Offline
                                                                            tango44
                                                                            Posts: 452
                                                                            tango44 Offline
                                                                            tango44
                                                                            wrote on last edited by
                                                                            #72 Quote Reply

                                                                              I agree, but with my first P2 they just canged for one in the same condition.
                                                                              I have contacted Leatherman about the issue and they just answer: You are welcome to send to our warranty program and thats it.
                                                                              Both of the tools that have the same problem where made in 06/19 I wonder if other people have newer tools with the same problem?
                                                                              I don't think Leatherman is giving the attention or level of importance to this issue.
                                                                              I hope they do it soon.

                                                                              1 Reply Last reply
                                                                              • AimlessWanderer Offline
                                                                                AimlessWanderer
                                                                                Posts: 17,518
                                                                                AimlessWanderer Offline
                                                                                AimlessWanderer
                                                                                wrote on last edited by
                                                                                #73 Quote Reply

                                                                                  @tango44 said:
                                                                                  I agree, but with my first P2 they just canged for one in the same condition.
                                                                                  <snip>
                                                                                  I don't think Leatherman is giving the attention or level of importance to this issue.

                                                                                  That's why customers need to keep sending them back. Every time.

                                                                                  Leatherman clearly think these are acceptable. Customers clearly do not.
                                                                                  I personally agree with the customers. These are poorly designed/made.

                                                                                  Leatherman need to be told that this level of quality is unacceptable, and the only way to do that, is keep sending back every single tool that is not up to the standard expected of a tool at that price. They'll get the message eventually. Social media users should spread the word too, including links back to this thread, so they have a couple of options to try, should they choose to attempt correction themselves (not all countries have the same level of warranty support).

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 3
                                                                                  • 4
                                                                                  • 5
                                                                                  • 6
                                                                                  • 7
                                                                                  • 8
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Leatherman Tools
                                                                                  4. Free P4 pliers stiffness after moderate or heavy use
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0