Knife Snobs?
-
@Steelej1976 said:
Lol,Hopefully I can be Knighted. Thanks
And so you are, Welcome Sir Steelej1976.
-
Welcome aboard Steelej1976!
-
Congratulations, Sir Steelej1976!
-
Welcome to the Realm!
-
Thanks Everybody!

-
@Frailer said:
Long story short: They don’t get it, because they come at knives from a different perspective.The “EDC” movement has grown by leaps and bounds over the past few years. I have a very long daily commute, so I listen to a lot of podcasts, several of which are knife-centric. I’m always amazed when I hear people say they’ve been a “knife guy” for two or three years. These people are frequently about super steels, ball bearing flippers, and “drop shutty” action. They don’t open their knives; they “deploy” them. Repeatedly. All day long. They don’t want to sharpen their knives. And they apparently cut a LOT of cardboard, for reasons that remain mysterious to me.
I became a “knife guy” a little over 50 years ago. Owning a knife was the first step into the community of men. It was a tool to assist in the performance of all the tasks that a man needed to do in the course of the day. And when I was introduced to the Swiss Army Knife as a very young adult the number of things my knife could do increased by an order of magnitude. I am fortunate to own more knives than any one man should, and some of them were—relatively speaking—quite pricey (I do love a good Sebenza), but if forced to restrict myself to only one knife it would be an humble SAK.
I say this without value judgment. I wish those who lust after the current maker-of-the week and the super-est of steels much joy in their hobby. Sincerely. But my priorities are different than theirs.
Yeah those EDC guys get a little carried away IMO. That being said I do enjoy looking at their gear and it has shaped some of what I carry. I do carry a Streamlight Microstream flashlight (which I know is lower tier to some of the EDC guys). I thought a lot of those guys were ridiculous for carrying a small flashlight on them everyday when they have a phone but after I dropped my phone and cracked it I realized that I couldn't rely on that as my primary light so those guys do have some decent points. Even still my SAK is always going to be my primary knife and probably the only one I carry.
-
[quote author=ElevenBlade link=topic=84255.msg2103250#msg2103250 date=1585083699
Maybe the difference is that there are some people that like knives, and there are some people who like to use them.
[/quote]This, a thousand times ,this.
-
I suppose its the difference between admiring craftsmanship and appearance over utility .
The butcher who actually cuts all day, doesnt care what the materials and handle , and designer etc are , he just needs it to cut and not hurt his hands using it all day, and be easy to touch up on the steel several times a day -
There is a lot of snobbery out there. Photography is full of that sort of nonsense. I once ran into a guy with drool inducing Canon L lenses. He looked at my gear and commented at how poor my lenses were. Man, I was floored and could only dream of such expensive equipment. All that was shattered once I saw his photos. What a waste. He was all about the gear and actually put me down for my much cheaper gear...but could not take a photo to save his life.
SAKs are great knives that are not only functional...but are easy to sharpen. It is a real honest tool.
-
@Steelej1976 said:
...I do carry a Streamlight Microstream flashlight (which I know is lower tier to some of the EDC guys). I thought a lot of those guys were ridiculous for carrying a small flashlight on them everyday when they have a phone but...A pocket flashlight is one of those items you don’t know you need until you carry it. It could be argued that it’s even handier than a knife. You may not encounter something that needs cutting on any given day, but I guarantee you will experience darkness.
For years my flashlight of choice has been the humble Streamlight Microstream. This one has a lot of miles on it.

-
@Frailer said:
A pocket flashlight is one of those items you don’t know you need until you carry it. It could be argued that it’s even handier than a knife. You may not encounter something that needs cutting on any given day, but I guarantee you will experience darkness.For years my flashlight of choice has been the humble Streamlight Microstream. This one has a lot of miles on it.

I like your style Frailer.

-
I've got a couple of those Streamlights myself. Excellent value.
-
I've got a Knife-snob streak in me. However, over several decades of knife use, I've come to the conclusion that knife snobbery is completely unwarranted.
Most days my fancy knives stay at home and it's a SAK that is carried. SAK's are too useful to not carry one. And that usually makes a secondary knife redundant. So, the default pocket knife is the ubiquitous SAK. Appropriately so, says I.
-
The blade steel snobbery is why I cannot stand most of the knife reviewers on youtube.
There are only two guys (Nick Shabazz and Pete from Cedric & Ada Outdoors) that I can think of offhand that enjoy talking about, testing, and reviewing all sorts of both humble and insanely nice knives and yet still carry a SAK around the house. For all his high-end knives Nick still carries a Cadet at home and Pete uses a Skeletool CX or SAK on a regular basis for house chores. Heck, Nick has a custom Vic Classic with his name on it from BladeHQ.
It is my humble opinion that this means it is these basic, no frills knives that are their true day to day workhorses and that this is also the truth for many other "knife guys". They just don't want to admit it to themselves.
The SAK is a humble, no non-sense tool that will always perform as it was designed to do, which is why I love it.
-Wes.
-
@Wessaen said:
The blade steel snobbery is why I cannot stand most of the knife reviewers on youtube.-Wes.
I have to agree there, in my possibly unpopular opinion. I'd bet that most people wouldn't be able to guess the type of blade steel the way a sommelier can guess an expensive vs a cheap wine. Any steel with a "name" to it is going to be good enough. It will cut. Nobody is cutting up things for hours to the point that they dull the blade to uselessness - and if they are they shouldn't be. What do people cut anyway? One of the more dulling tasks I can think of is stripping wire - in which case, use a wire stripper. Do these folks put the same thought into the steel in the razor they shave with? Yup snobbery in my estimation.
That said, one of the nice things about Victorinox is that they use different steels for different tools, They make calculated decisions about what steel they use. They could use "premium steel" but they choose not to.
Similar to Leatherman's choice in ferro rod on the signal - they made a conscious decision to use a softer ferro rod which - at that size - will throw a better spark but wear away faster. The idea is - if you are in the unlikely situation where you are using your Signal ferro rod - you have ONE shot to make a fire because you're in dire straits. If you make it home alive, lucky you - you can buy a replacement. You were never meant to make a years worth of campfires with your signal, like you were never meant to not sharpen your SAK ever.
While I'm on my rant - I think that's a problem we have in general nowadays. We forget that some decisions are made for us with some high level thought behind it, and we criticize it without realizing why it is so. I was reading in the news yesterday. A company stopped doing XYZ. The headline says that Company is not doing XYZ any more! Comments galore of how bad the Company is. I even talked to people today about it - everyone's up in arms... how can the company do that and make it harder to get their product?. Not one person realizes that the reason the company stopped doing XYZ is that due to complex regulatory issues, if Company does ABC instead, then their product is more easily obtained. Just need to wait for ABC to get underway. But 99% of people don't know the complex regulatory stuff, and they just criticize the company. Sometimes one needs to step back and not mess with the universe.
Sorry - rant over.

-
@ElevenBlade said:
While I'm on my rant - I think that's a problem we have in general nowadays. We forget that some decisions are made for us with some high level thought behind it, and we criticize it without realizing why it is so. I was reading in the news yesterday. A company stopped doing XYZ. The headline says that Company is not doing XYZ any more! Comments galore of how bad the Company is. I even talked to people today about it - everyone's up in arms... how can the company do that and make it harder to get their product?. Not one person realizes that the reason the company stopped doing XYZ is that due to complex regulatory issues, if Company does ABC instead, then their product is more easily obtained. Just need to wait for ABC to get underway. But 99% of people don't know the complex regulatory stuff, and they just criticize the company. Sometimes one needs to step back and not mess with the universe.In general I agree with you but for many of the larger corporations these days it is often the board or the bean counters that make the choice to use different (less expensive) materials that the engineers/designers then have to try and make the best use of. I'm sure the Gerber Armbar back-spring is a victim of this as it is a glaring issue I'm willing to bet that the engineers saw early in the design process but were not able to fix. I would have paid another $5-10 if the spring worked correctly.
If I buy something I want it to last and because of that I often try to track down an older version of an item that was produced before cost cutting changed the basic design. For all the bad vibes surrounding Kickstarter I have been able to back several original designs that were implemented before anyone other than the original creator got to it. The creator's profit margin might not have been as high as it could have otherwise been but my item is usually better off for it.
I want companies like Gerber(and SOG I guess, but they are reportedly revamping their tool lines this year) to survive, but they have to raise their standards a bit more if they want my money.
-Wes.
-
I think part of those discrimination may come from a critical view on SAK steel. Many hold the view that it is 'cheap' steel so it's not worth carrying.
But think about those folks a hundred years ago, where their lives do rely on knives, they all get by just fine with whatever steel they had. And I seriously doubt most modern knife enthusiast will use their knives as hard and as much as those folks back then, so isn't it silly now to think that we all need super steel in order to survive.
Don't get me wrong, as a knife enthusiast, I too enjoy the benefits from these new super steels. But to argue non super steel is inferior is like arguing the world only needs Ferrari, yet Toyota/GE/VW are some of the biggest names in the world.
-
@Wessaen said:
The blade steel snobbery is why I cannot stand most of the knife reviewers on youtube.There are only two guys (Nick Shabazz and Pete from Cedric & Ada Outdoors) that I can think of offhand that enjoy talking about, testing, and reviewing all sorts of both humble and insanely nice knives and yet still carry a SAK around the house. For all his high-end knives Nick still carries a Cadet at home and Pete uses a Skeletool CX or SAK on a regular basis for house chores. Heck, Nick has a custom Vic Classic with his name on it from BladeHQ.
It is my humble opinion that this means it is these basic, no frills knives that are their true day to day workhorses and that this is also the truth for many other "knife guys". They just don't want to admit it to themselves.
The SAK is a humble, no non-sense tool that will always perform as it was designed to do, which is why I love it.
-Wes.
Can't agree more with what you said, Wes.
In terms of nit picking, I think Shabazz may still have decent value as a reviewer. And originally I have some respect for Cedric & Ada Outdoor channel for putting in all the hard work of cut testing, though it is often eccentric and Dean(IIRC) criticize the testing method is hardly uniform and fair, however, since his "Knife Company Tier List (Best to Worst) 2020" video came out, that respect just drop down to zero.
I don't know he was doing it just because those companies gave him knives or rebate, but ranking companies based on how novelty they are is just silly. So Cold steel is a 'top tier' knife company, two levels higher than CRK and Victorinox, because they make javelin and shovel? ::)
-
Good points on both sides ELEVENBLADE and WESSAEN
.Theres status with owning certain knives within the knife community. Its the same with most any hobby. I enjoy reviews of knives most part. Knife people all pretty much relate up until brands come into play, at least from my observations
. I don't think it is about money. If certain knives were "affordable" to you would you buy them? I cannot see myself owning certain knives. There are some that just don't appeal to me aesthetically. Beauty is in the eye of the beholder, yes/no?I've wondered if it's something to do with after a purchase of a certain item, justifying the price paid? Is the price paid somehow tied into perceived performance/value/quality? Is it the mentality that after the purchase one simply cannot say they don't like it or it was hype?
We all need our knives to cut. Aside from that what else should a knife do?
A SAK as said is an honest knife. It does what its creator created it to do. Its 91mm and 58mm ( in my case ) of solutions to everyday real life stuff. Yes my blades cut stuff too.
-
I'll deviate here a bit.
Vic steel is a good steel. I value it mostly for its rust resistance. It is a nearly 'worry free' steel. After that, it find it to be a 'good enough steel'. It doesn't hold an edge nearly as well as some premium knife steels.
That's OK. I keep a sharpening stone handy and can touch up a Vic if needed. I enjoy sharpening.
Still, I really enjoy sharpening and using 154CM steel knives. High-carbon steel knives are a joy to sharpen and use.
In the kitchen, I have a Vic knife that performs well. I think the steel in their kitchen line is different from that used in their SAK line. But...even that is not as nice as my High Carbon or German steel knives.
I think there is a place for high-end steel knives. I agree that most users will never really take advantage of the benefits of Elmax or S90V. However, that doesn't mean the difference isn't noticeable. It is.
As previously stated, a SAK is my EDC of choice. It works and works well. I think anyone who 'looks down' on a SAK doesn't understand the real world use of pocket knives. But I still love my S30V knives and will likely always have one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login