SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
DAY 8
Again one of the champions


-
Day 8
SC helps prep the spicy hotpot dinner tonight.



-
@Ivo said:
No not for eyeglasses but for a SAK.
, it is to small for eyeglasses. It is for larger SAKs or SwissTool.
@Fuzzbucket said:
Looks great!
Taste great too...@SirVicaLot said:
With the shelves. The resistance is screwed anyway :D
-
Day 8
My first break in the day. Catching a short breather with the SuperTimer.

-
That does look good, Comis!
Day 8
Another day at the WFH keyboard, so time to pop open a refresher with the bottle opener on the CT34 mod - not the same as a midweek after work pint at the local, but we are where we are!

-
Day 8 saw plenty of uses already:
Small blade to open a box, large blade for food prep. Used the chisel tool to remove the caps of the zipper pullies. Replaced the black ones with the neon paracord i got in last week:


Also made another paracord dangler. This time for the flashlight in my FAK. Scissors were used.Noticed a board on the fence was loose, so I used the Philips to tighten it. Turns out though that the screw turned freely. Tried to remove it, so I could replace it with a longer screw. Would not come out. So I used the tip of the can opener to get behind the screw head, and then the whole can opener to apply outward facing force while turning the screw. Picture after it was out, but you get the point:

-
Swiss Army Knights mission - Carve a notch into your staff for each time you use the Phillips or the Corksrew. At the end we'll see which got more collective use.
Corkscrew: //
Phillips: /// -
Day 8 of 30
Opened box with SwissChamp today, used also SC at work today needed phillips to unscrew some screws off. It was faster use SC than go get power drill from downstairs.

Packet contained some clothes and security torx sets and 5x wet sand papers 2000 grit

Only Tools Matters
-
Day 8
The Champion. Though not my oldest, it's easily my most used SAK given its age and versatility. It's been on nearly every one of my camping trips since I got it. I remember when I had just joined the scouts, one of the leaders was explaining how some insects would lay eggs inside some sort of fruit he found - he cut it open with a traditional Buck 110 to show me the tracks left by the insect as it worked its way out. I was hooked on all of it - the cool Buck 110, the camping trip, and geeking out on science.
I got myself a Buck 55 knockoff, Not too long after, I got the Champion as a gift. I can remember that in those days, I was most excited about the magnifying lens. I'd roam around the forest for hours looking at things with the lens or kneel at the edge of the fire ring trying to light tinder with sunlight. These days I don't get much use out of the lens for entertainment purposes or scientific discovery, unfortunately, and although my vision is terrible, eyeglasses do the trick for now.
I still roam around the forest with the Champion - it still comes camping with me almost every time. Having the eyeglass screwdriver, tweezers, lens, and wood saw, its still my most relied-upon camping tool
More on that here...
/topic/83526
Corkscrew: /
Phillips: \
-
Day 08
Had to fasten the fan on a raspberry pi.
Pliers to the rescue!

-
Day 8
Don't know what it was, but I found it on our living room floor and didn't want to touch it...

-
DAY 8
Ended up working on my Outdoor Master Mic setup today and the Swisschamp was a big help marking the extra Kydex piece, cutting it and filing the edges smooth. The scissors came in handy making a quick deploy bracelet to hang off the side. -
Day 8
Used the Champion to open a bag of chips, put some PB&J on a biscuit.


-
-
Day 08
I just heard that masks are now mandatory when grocery shopping and some other activities in parts of South Florida. I think I'm ready. -
@Max Stone said:
Day 8
My first break in the day. Catching a short breather with the SuperTimer.
@Rizio Il Ghiro said:
That does look good, Comis!Day 8
Another day at the WFH keyboard, so time to pop open a refresher with the bottle opener on the CT34 mod - not the same as a midweek after work pint at the local, but we are where we are!
Taking a breather is always good, so is chilling after work!@SirVicaLot said:
Day 8 saw plenty of uses already:Small blade to open a box, large blade for food prep. Used the chisel tool to remove the caps of the zipper pullies. Replaced the black ones with the neon paracord i got in last week:


Also made another paracord dangler. This time for the flashlight in my FAK. Scissors were used.Noticed a board on the fence was loose, so I used the Philips to tighten it. Turns out though that the screw turned freely. Tried to remove it, so I could replace it with a longer screw. Would not come out. So I used the tip of the can opener to get behind the screw head, and then the whole can opener to apply outward facing force while turning the screw. Picture after it was out, but you get the point:

The neon paracord looks sharp! You sure you didn't unscrew with the drill below? >:D

@Antti Lammi said:
Day 8 of 30Opened box with SwissChamp today, used also SC at work today needed phillips to unscrew some screws off. It was faster use SC than go get power drill from downstairs.

Packet contained some clothes and security torx sets and 5x wet sand papers 2000 grit

Only Tools Matters
Antti, what's on the corkscrew? Is it the same mod that Sos24 did?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
