SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
@comis said:
Kamakiri, you peak my curiosity, what is exclusive to '86 champs?In that back side pic, the awl has a different taper...starting in late '86 or so. From then on, the taper is on the tip side of the sewing eye. So the ones that are definitely '86 have the shallow taper close to the awl's pivot.
The other thing runs to about the first 4 years of Champs.
And that's not including the backsping bump either. So I guess there were three things more! I know it was sort of covered be the moving of the key ring lug.
-
@CraftsmanSAK said:
DAY 6
Got a Rainier a while back and decided to clean it today when I got home from work. This is one use for the fish scaler I've done on many occasions with a little piece of cotton and it's perfect because of the width of it. I use the hook remover to push the cotton through the slot and the hook remover is great at pulling the dirty piece of cotton back out. If it's real bad, I end up soaking the knife in warm water first.
Nice use Craftsman! I use the scaler that way too. Nice that it's thin enough to get in most nooks and generally won't scratch anything.
Also like the Rainier...best source for those 60% serrated blades!
-
@Alan K. said:
Day 07
Just another glamour shot, but you have to admit the CT-41 is a beauty.It sure is!
@SirVicaLot said:
Day 7
„We got ˋem, we got ˋem!! Great job, guys! Make sure they don‘t go anywhere. I am sure Lord Vader wants to chat with them...“
Used the tweezers to remove a splinter. That little bugger was embedded deep into the skin.
My favorite use of the tweezers!
What...what...what? Resistance just give themselves in that easy?
:D@CraftsmanSAK said:
DAY 7
Glad to be home from work and I have tomorrow off since I have to work Saturday. Hoping the weather cooperates tomorrow and I can do some maintenance and tuning on a couple of dual sport bikes I like to ride. For now... just gonna write down everything that needs attention so I don't forget it tomorrow. Time to enjoy the rest of the day!Good luck with the bike fix tomorrow!
@Simon_Templar said:
Day 7No action for the XLT today, so just another vanity picture
Good use!
These guys look ready! -
@ElevenBlade said:
This one has a lot of stories to tell. Though it only opened a bag of candy today.

Corkscrew: /
Phillips: \EB, what's the story? No holding out for us now!
:D@Sos24 said:
Day 7
No use today, but the Champion kept me company getting so,e fresh here.

Nice chilling in the sun!
Fished some stuff out from under some furniture, with the fish scaler. And I had to use the CT bit driver to retrieve the SC.
Nice joint rescue!

@SirVicaLot said:
Day 7 Update
Used the wood saw to cut a small piece of wood I wanted to use as backing. The SC saved me from having to go all the way back to the garage. This is one of the main reasons for me to carry a multitool: Quick fixes for problems, and saving me a trip to the tool box :DIs this going to help with the resistance or the shelf?
@kamakiri said:
In that back side pic, the awl has a different taper...starting in late '86 or so. From then on, the taper is on the tip side of the sewing eye. So the ones that are definitely '86 have the shallow taper close to the awl's pivot.The other thing runs to about the first 4 years of Champs.
And that's not including the backsping bump either. So I guess there were three things more! I know it was sort of covered be the moving of the key ring lug.

-
@SirVicaLot said:
Lego Ghostbusters! :ahhh
Well, you called them a few days ago and here they are!
-
DAY 8
Again one of the champions


-
Day 8
SC helps prep the spicy hotpot dinner tonight.



-
@Ivo said:
No not for eyeglasses but for a SAK.
, it is to small for eyeglasses. It is for larger SAKs or SwissTool.
@Fuzzbucket said:
Looks great!
Taste great too...@SirVicaLot said:
With the shelves. The resistance is screwed anyway :D
-
Day 8
My first break in the day. Catching a short breather with the SuperTimer.

-
That does look good, Comis!
Day 8
Another day at the WFH keyboard, so time to pop open a refresher with the bottle opener on the CT34 mod - not the same as a midweek after work pint at the local, but we are where we are!

-
Day 8 saw plenty of uses already:
Small blade to open a box, large blade for food prep. Used the chisel tool to remove the caps of the zipper pullies. Replaced the black ones with the neon paracord i got in last week:


Also made another paracord dangler. This time for the flashlight in my FAK. Scissors were used.Noticed a board on the fence was loose, so I used the Philips to tighten it. Turns out though that the screw turned freely. Tried to remove it, so I could replace it with a longer screw. Would not come out. So I used the tip of the can opener to get behind the screw head, and then the whole can opener to apply outward facing force while turning the screw. Picture after it was out, but you get the point:

-
Swiss Army Knights mission - Carve a notch into your staff for each time you use the Phillips or the Corksrew. At the end we'll see which got more collective use.
Corkscrew: //
Phillips: /// -
Day 8 of 30
Opened box with SwissChamp today, used also SC at work today needed phillips to unscrew some screws off. It was faster use SC than go get power drill from downstairs.

Packet contained some clothes and security torx sets and 5x wet sand papers 2000 grit

Only Tools Matters
-
Day 8
The Champion. Though not my oldest, it's easily my most used SAK given its age and versatility. It's been on nearly every one of my camping trips since I got it. I remember when I had just joined the scouts, one of the leaders was explaining how some insects would lay eggs inside some sort of fruit he found - he cut it open with a traditional Buck 110 to show me the tracks left by the insect as it worked its way out. I was hooked on all of it - the cool Buck 110, the camping trip, and geeking out on science.
I got myself a Buck 55 knockoff, Not too long after, I got the Champion as a gift. I can remember that in those days, I was most excited about the magnifying lens. I'd roam around the forest for hours looking at things with the lens or kneel at the edge of the fire ring trying to light tinder with sunlight. These days I don't get much use out of the lens for entertainment purposes or scientific discovery, unfortunately, and although my vision is terrible, eyeglasses do the trick for now.
I still roam around the forest with the Champion - it still comes camping with me almost every time. Having the eyeglass screwdriver, tweezers, lens, and wood saw, its still my most relied-upon camping tool
More on that here...
/topic/83526
Corkscrew: /
Phillips: \
-
Day 08
Had to fasten the fan on a raspberry pi.
Pliers to the rescue!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
