SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
@Simon_Templar said:
I think this and the CT34 might be the best stacked SAKs for urban life. Swisschamp and CT41 are great but have too many outdoor features, CT 29 lacks scissors. What do the other knights think?Hmmm...that's an interesting question. I am slightly biased towards the SC since that grew up with me. Beside the basic opener/blade layers, CT34 also has the pliers and mag/led layer which I think is just alright. I'd much rather to trade in the led for an inline phillips and possibly even loss the pliers for a slimmer EDC carry.
@ElevenBlade said:
Day 13Opened a package today
Once I went back to SAKs, after having used the file to fix a door and deciding that I didn't need to EDC a plier based MT any more, the only thing I regretted was not making the switch sooner. Oh... the amount of grease and metal shavings I must have eaten along with my fruits.
I essentially reserved the longer blade on the SAK for food prep, and the smaller blade did everything else.Years before I ever started down the multitool path, I had a couple of brief entanglements with traditional slipjoints. One was a Buck 309, where I got quite used to smaller precise tools instead of heavy-duty folder. The small blade on the Champion had always done most of the work, even when I first got it - carving and making feathersticks, cutting paper, cardboard, rope, you-name-it. I've found that if you're precise and careful, a smaller blade can be kept razor sharp. Although its a bit gunked up from cutting more packing tape than I should have, its still the most used tool on my 91mms by far. I usually EDC an Alox or a Compact, but whenever I do have a small blade, it's the go-to.

Corkscrew: /
Phillips: \Before MTO, I don't think I've ever make distinctive use of blades, i.e. I kept mixing the use and have to clean both blades for food almost everytime. But the large blade for food, and small blade for everything else really does make a lot of sense. I'd also learn about using the awl for the box opening, so less chance to gunk up the small blade, but I kept on forgetting it still.

@Antti Lammi said:
Day 13 of 30Toothpick and scissors was used today.

Only Tools Matters

@Alan K. said:
Day 13Snipped another tomato today.
What are we making?

@CraftsmanSAK said:
DAY 13
Today, my SC had the most important duty of all - providing access to lunch. If I lived in Alaska I would probably be eating fresh salmon from the rivers everyday!You don't happen to know John West...do you? :D
https://www.youtube.com/watch?v=CVS1UfCfxlU -
Day 13
Needed to do some minor repairs on the fence after some high winds. The Champion helped prior open a box of nails and pry out some old nails before replacing on the fence. The Champion also screwed in and tightened some screws on the gates


The Champion also opened up a bag of dog treats, some of which got cut up and some vacuum sealed.
-
@Sos24 said:
Day 13
Needed to do some minor repairs on the fence after some high winds. The Champion helped prior open a box of nails and pry out some old nails before replacing on the fence. The Champion also screwed in and tightened some screws on the gates


The Champion also opened up a bag of dog treats, some of which got cut up and some vacuum sealed.
Good uses!

-
-
Day 13
Opened more packages. Still not my replacement scales


Also used the bottle opener to pry open a can of paint. Did some touch-ups around the house. This was the first day of the stay-at-home order that I was really bored :-\
-
Cody, that's a pretty small lockback there. Lately I have been thinking and re-evaluating some of my knives collection. I come to realization that since I will be carrying some form of SAK, if I ever do carry a separate blade, I probably should get one longer in length and with lock, otherwise the point is kinda moot. What's everyone's preference on back up blade?

@SirVicaLot said:
Day 13Opened more packages. Still not my replacement scales


Also used the bottle opener to pry open a can of paint. Did some touch-ups around the house. This was the first day of the stay-at-home order that I was really bored :-\
I know the feeling, but let's stand fast together! In this fight against virus, I do believe every small act of kindness and self restraint will contribute to the greater good and help to overcome it faster. Hope you and your family will stay safe and healthy during this time.

-
Day 13 was another great day with very nice pics.

-
DAY 14
CT29 and CT41


-
Day 14
In Japanese legend, many skilled Samurai or performer can balance a spinning top on the edge of Samurai sword, as a demonstration of concentration and skill...

I don't have either in my place, but I would like to challenge our SAK knights to either balance a small ball as long as you can or bounce it as many times as you can...with a blunt tool like the spatula, or the metal file or the scaler, and no, no knife please.


I bounced a ping pong ball 4 times in the first 3 minutes of trying...

-
Thanks comis

-
Day 14
Time for a break and a brew with the SC fish scaler doing teaspoon duty to hoick out the teabags. Don’t really have much for the fish scaler as I’m not a fan of fish, but it’s mini ruler might come in handy if I ever remember it’s there!

-
@comis said:
I know the feeling, but let's stand fast together! In this fight against virus, I do believe every small act of kindness and self restraint will contribute to the greater good and help to overcome it faster. Hope you and your family will stay safe and healthy during this time.
Hope your family stays safe and healthy too

Had an idea for a project last night, that should keep me occupied for a while. I will make a leather camera strap for my DSLR. This will be a first time doing it, so a little testing will be needed. SC should prove helpful as awlways :D
-
@Rizio Il Ghiro said:
Day 14Time for a break and a brew with the SC fish scaler doing teaspoon duty to hoick out the teabags. Don’t really have much for the fish scaler as I’m not a fan of fish, but it’s mini ruler might come in handy if I ever remember it’s there!
Nice brew!

@SirVicaLot said:
Hope your family stays safe and healthy too
Had an idea for a project last night, that should keep me occupied for a while. I will make a leather camera strap for my DSLR. This will be a first time doing it, so a little testing will be needed. SC should prove helpful as awlways :D
That would be cool! Would that be a sling system or good old fashion two-point over-the-neck strap? -
Two point over the neck. Most sling systems are attached to the tripod plate mount, and I use my tripod 99% of the time when I am out and about.
-
@SirVicaLot said:
Two point over the neck. Most sling systems are attached to the tripod plate mount, and I use my tripod 99% of the time when I am out and about.If you don't mind to wait a little, I would love to show you my sling tomorrow. It's a pretty functional dual-lock sling setup, which allows quick detachment for tripod use while offering pretty good safety. It saved my camera numerous of times and I won't go on a photo trip without it.
-
Sounds interesting

-
Day 14
One of the things that I liked about the Gerber MP600 that I used for work for a short while was the ruler etched into the scale. I'd have to make rough estimates on lengths from time to time, and I prided myself in making better rough estimates than the other guys.
That did become a lot less important when I changed jobs, but you know what they say about old habits and perceived need.Switching to the Champion for EDC, I was having fun getting as much use out of it as was possible. I didn't anticipate scaling a fish with the SAK, but the ruler along the side, and the straight edge on the back were proving useful in a pinch. I'd seen a video showing how a straight line can be drawn by placing a pencil in the hook disgorger tip of the tool, and drawing the handle of the SAK along a straight edge.
Another job change was in the cards for me already, so I was looking forward to being the Champion Length Estimator once again. The Victorinox Fisherman became a frontrunner for my next SAK purchase, as the Champion was decidedly too bulky for my EDC. In a strange turn of events, I switched out the Champion for an Alox Soldier that became my one and only EDC for the next decade. Work responsibilities morphed again, and a burning need for scissors and that ruler led me to pair the Soldier with a Leatherman Micra.
In principle, I'm decidedly a one-tool kinda person when it comes to what I carry, and the Champion... more so the SwissChamp, would cover all the bases for EDC, work, and the woods. I'd just need to come up with a less obtrusive way to carry it - perhaps a horizontal belt case. This thing is growing on me again.
Looks like I haven't used the corkscrew or the Phillips much at all in the last two weeks.


Corkscrew: /
Phillips: \
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

