SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
Day 14
My mmm...Spartan bit driver...


-
@Max Stone: That CT S is too minimalistic. No fish scaler or spatula... ::)
-
@SirVicaLot said:
Opened more packages. Still not my replacement scales
This is a family channel... The wife walked in and wondered why I was looking at a fully exposed SAK :o
-
DAY 14
Finally get a day off work tomorrow. Although I did use the flat screwdriver and scissors today I wasn't in the frame of mind to take a pic at the time. Now that I'm home the bottle opener has once again been in use. Looking forward to a day off!
-
@CraftsmanSAK said:
This is a family channel... The wife walked in and wondered why I was looking at a fully exposed SAK :o
:D -
Day 14
I used the Champion to cut a few weeds that were too thick to just pull, cut open a few boxes and prepare Fisher’s treat for when I had to go to return the in-laws refrigerator and freezer food after their electric came back on.

-
@SirVicaLot said:
Sounds interesting

This is the dual sling that I use nowadays, but the concept is the same for single sling
The idea is to allow a really quick setup for both carrying and attaching to a tripod. The base of the camera has L-bracket tripod base semi-permanently attached on it, so putting it on tripod is quick and smooth.On the sling, I got the shortest quick release clamp semi-permanently attached onto a Black Rapid sling connector. Once taken off the tripod, this clamp will bite onto the L-bracket for ease of carrying.
And on top of the quick release clamp, there is the Op/tech connector quick release clip on the side for added security.
To sum it up, every time the camera go onto the tripod, it is just loosening the clamp and unbuckle the clip, takes less than 3 seconds, but it allows me the option to take the lanyard off the camera, which is really important. Because in windy situation, the lanyard will move the camera around or snag onto a person. Worst, I have seen it dragged the camera onto the ground in high wind without being secured properly.
-
@ElevenBlade said:
Day 14One of the things that I liked about the Gerber MP600 that I used for work for a short while was the ruler etched into the scale. I'd have to make rough estimates on lengths from time to time, and I prided myself in making better rough estimates than the other guys.
That did become a lot less important when I changed jobs, but you know what they say about old habits and perceived need.Switching to the Champion for EDC, I was having fun getting as much use out of it as was possible. I didn't anticipate scaling a fish with the SAK, but the ruler along the side, and the straight edge on the back were proving useful in a pinch. I'd seen a video showing how a straight line can be drawn by placing a pencil in the hook disgorger tip of the tool, and drawing the handle of the SAK along a straight edge.
Another job change was in the cards for me already, so I was looking forward to being the Champion Length Estimator once again. The Victorinox Fisherman became a frontrunner for my next SAK purchase, as the Champion was decidedly too bulky for my EDC. In a strange turn of events, I switched out the Champion for an Alox Soldier that became my one and only EDC for the next decade. Work responsibilities morphed again, and a burning need for scissors and that ruler led me to pair the Soldier with a Leatherman Micra.
In principle, I'm decidedly a one-tool kinda person when it comes to what I carry, and the Champion... more so the SwissChamp, would cover all the bases for EDC, work, and the woods. I'd just need to come up with a less obtrusive way to carry it - perhaps a horizontal belt case. This thing is growing on me again.
Looks like I haven't used the corkscrew or the Phillips much at all in the last two weeks.


Corkscrew: /
Phillips: \I gonna shamelessly recommend a post I wrote about DIYing a Ranger band carry, it is pretty inexpensive little project and work quite well. :D
/post/770652@Alan K. said:
Comis, I wasn't preparing a recipe, I just like fresh tomatoes. I do carry a single blade knife along with my SAK because it serves as my primary cutting tool which allows me to keep the SAK blades exceptionally sharp as a ready reserve. If I do use a SAK blade for food prep or anything it is most likely to be the big blade and this still leaves me with the small blade for things you would want a clean and sharp blade for such as the near minor surgery to remove a deeply embedded thorn or to relieve an ingrown nail. My EDC for at least the last 3 years has been the Spirit with SC or Champion or CT-41 in a pocket sheath in my back pocket, and a Myerchin Titanium rigging knife clipped to my front pocket. I like the titanium rigging knife because even with a marlin spike it weighs almost nothing and having the extra tool, the marlin spike, which has come in handy, is just a bonus.Day 14
My EDC during this challenge so far. The CT-41, Spirit, and the Myerchin Titanium rigging knife.I like the utilitarian look of this Myerchin Ti rigging knife, combining with a SAK, no doubt it should be a really functional pair!

I have the Shieldfield British Army Knife in collection, mostly for curiosity, but the spring on that is really stiff.
@Antti Lammi said:
Day 14 of 30Carried today SwissChamp with me.

Used blade and chisel today and this happened with chisel, gotta say its still sharp as new and offcourse i cutted myself with it.

Only Tools Matters
Ouch, hope it is too deep and heals quickly. Now I remembered having a similar nick long, long time ago when I was back in boyscout.

@cody6268 said:
DAY 14 Right lens popped out of my glasses frame for the umpteenth time. Really the mini screwdriver was the very thing that converted me into a corkscrew fan on SAKsThat really is my reason why I like the corkscrew so much.

-
Went to the city with my bicycle. Hadn't any tool on me. Could've used a Philips. Need to reset the gear lever which doesn't works...

@ulzhan said:
@Comis The spatula is the poor mans samurai... Spatula.
:D@Simon_Templar said:
Day 14Someone in my family (who must not be named) has the rather unpleasant habit of leaving used tissues on the floor. XLT to the rescue!
Maybe it's the same person leaving the piece of ham behind?
:D@Max Stone said:
Day 14My mmm...Spartan bit driver...

Essentially, it is. :D
-
@CraftsmanSAK said:
This is a family channel... The wife walked in and wondered why I was looking at a fully exposed SAK :o
I almost spilled my coffee on this one...good one!@Sos24 said:
Day 14
I used the Champion to cut a few weeds that were too thick to just pull, cut open a few boxes and prepare Fisher’s treat for when I had to go to return the in-laws refrigerator and freezer food after their electric came back on.

Good use and kind of you to help storing the food. Sometimes I felt like I didn't appreciate the convenience of electricity, gas and water supply enough, until one of them is gone for a day or two.
-
Day 14
SC helped with a leather project. Scissors and Philips got use. Don‘t worry comis, not the camera strap yet ;)


-
Swiss Army Knights mission - Carve a notch into your staff for each time you use the Phillips or the Corksrew. At the end we'll see which got more collective use.
Corkscrew: //
Phillips: //// -
@SirVicaLot said:
Day 14SC helped with a leather project. Scissors and Philips got use. Don‘t worry comis, not the camera strap yet ;)



-
@comis said:

This is the dual sling that I use nowadays, but the concept is the same for single sling
The idea is to allow a really quick setup for both carrying and attaching to a tripod. The base of the camera has L-bracket tripod base semi-permanently attached on it, so putting it on tripod is quick and smooth.On the sling, I got the shortest quick release clamp semi-permanently attached onto a Black Rapid sling connector. Once taken off the tripod, this clamp will bite onto the L-bracket for ease of carrying.
And on top of the quick release clamp, there is the Op/tech connector quick release clip on the side for added security.
To sum it up, every time the camera go onto the tripod, it is just loosening the clamp and unbuckle the clip, takes less than 3 seconds, but it allows me the option to take the lanyard off the camera, which is really important. Because in windy situation, the lanyard will move the camera around or snag onto a person. Worst, I have seen it dragged the camera onto the ground in high wind without being secured properly.
I have the same issue with wind here, which is why I also prefer a quick release on my strap. Also comes in handy for macro setups, where you don‘t want to constantly disturb the surroundings with a swinging strap.
That is an interesting setup you use
It might be a little tricky for diy, as I would need several connectors and a new mounting bracket as well
I will start with the simple two point neck strap first, as I have all necessary material for that already at home. -
@SirVicaLot said:
I have the same issue with wind here, which is why I also prefer a quick release on my strap. Also comes in handy for macro setups, where you don‘t want to constantly disturb the surroundings with a swinging strap.That is an interesting setup you use
It might be a little tricky for diy, as I would need several connectors and a new mounting bracket as well
I will start with the simple two point neck strap first, as I have all necessary material for that already at home.I think the quick connector will be really helpful for a quick detachment, and I look forward to your creation!

-
Day 15
SC scissor opened a before bed snack

-
DAY 15
My two big WENGERs among some friends to start the day


-
-
@SirVicaLot said:
Day 14SC helped with a leather project. Scissors and Philips got use. Don‘t worry comis, not the camera strap yet ;)



-
@comis said:
I almost spilled my coffee on this one...good one!Good use and kind of you to help storing the food. Sometimes I felt like I didn't appreciate the convenience of electricity, gas and water supply enough, until one of them is gone for a day or two.
I think a lot of people take basic utilities for granted, but personal experience of loss can definitely make you appreciate.
My In-Laws tend to loss electricity more frequently during storms, and it is easy enough to go over and grab there stuff to prevent loss. This time I also delivered a couple items that I had purchased for them - an inflatable solar lantern and a battery pack with built in mini solar panel.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
