Show us your leatherwork
-
Really nice work both of you!
I have been on the lazy side with leather works lately with a newborn and all so it's nice to see your work
[It's not failure if you learn something from it]
-
I've been doing some bookmarks recently. Still not got them quite right but getting there. I really like pull up leather but Horween ain't cheap! Oh and I didn't realise till I looked at the pic that I've been chewing the bottom of the bookmark while studying. :D

-
@SirVicaLot said:
Last item I made that was not a sheath, is my front pocket wallet:


I also made a belt for my wife, but cannot seem to find a photo of it

That's really good!
-
@kottskrapa said:
Made this to my dad som weeks ago, he has just started hunting and wanted something to hold 4 shotgun shells, he wanted to carry it on his left side so I did it with snaps so he doesn't have to take off his belt to get it on and off
I'm not allowed to have the shells at home so I made some wood rods with the same size


Really good work!
@Chako said:
Here is another link of some of my older work. A few repeats.Really impressive! Next level stuff.
-
@pomsbz said:
I posted a bunch recently so apologies if this is getting too much.A watch strap.

Notebook slip.

Pouch for LM Charge.


My current EDC horizontal belt pouch.



Regular vertical sheath, designed to look 'stressed'. It's brand new in this picture.

Pouch for LM bits.

Little pouch for mini bic cause I had some left over leather and I was bored.

Horizontal opening SAK belt pouch.


My next project is a horizontal belt pancake sheath for a fixie. Never done a fixie sheath before so it should be interesting.
That is great work!

-
Thanks folks. We need a leatherwork badge around here. :D
-
Why didn‘t we think about that earlier? 
-
Great stuff, everyone! I have some ideas but haven't got the time to start them.

-
Completed a new sheath today.
Nothing fancy, the stitching is far from perfect, the stitches are very close together (I only have one hole punch), but it works!
I'd like it to be a bit tighter. I'll test it out for a few days and, if I'm not happy, I'll just make a new one!
I'll probably make another one anyways, in order to add some carrying options.



Enviado do meu Redmi Note 5 através do Tapatalk
-
@FInixNOver said:
Completed a new sheath today.
Nothing fancy, the stitching is far from perfect, the stitches are very close together (I only have one hole punch), but it works!
I'd like it to be a bit tighter. I'll test it out for a few days and, if I'm not happy, I'll just make a new one!
I'll probably make another one anyways, in order to add some carrying options.



Enviado do meu Redmi Note 5 através do Tapatalk
Cool! A few tips: use a regular fork to mark the holes, before stitching. It'll help keep them the same distance apart and in a straight line.
You can awlso wet mold the leather before stitching. Wrap the knife tightly in cellophane, soak the leather in hot water for some 5 minutes, Wrap the wet leather around the knife, using some blunt piece of wood or plastic to mark the shape of the knife. Let it dry, still wrapped around the knife. When dry, remove the knife, mark the holes, punch them and stitch.

Good to see you back, bro!

-
Great work 
-
Looks great. As long is it secures your knife and you learned something
. Great tips from pfrsantos. The more you stuff you make the more you learn. Once quarantine is over I'll pick up some more leather to make more things. -
Thanks guys!
Those are actually quite good tips!
Not sure I'm ready for wet forming yet, or am I?
I'm not posting as often as I should, but I've been following some threads regularly.
Enviado do meu Redmi Note 5 através do Tapatalk
-
Wet forming is pretty easy, just give it a try. Makes it much easier to form the leather to your liking and prevents cracking.
When forming the leather using your fingers, make sure you keep your fingernails away from it. They can make some pretty nasty dents in wet leather. Guess how I know
:D -
You are so ready for wet forming. As with any leather working skills, practice and have fun.
-
I am currently jumping into the whole 3D printer thing...but looking at this thread, I though I would post photos of my sweet Leather working station. I have it set up to help my workflow. I think you can zoom into the photos and get a good close look at the various tools and stamps. I know I am always curious to see other people's workstations.
The whole Mastercraft workbench bought a few years ago from Canadian Tire. I store my leather upstairs, and still have a few items up there that I haven't moved downstairs as of yet. Above I store all of my chemicals. they all just fit.
<a href="https://flic.kr/p/2iRYZ1o" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792383946_337bf224cb_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8349A by Chako, on Flickr
I did not take photos of this area, but underneath are a series of small parts bins where I store all the small pieces including belt buckles, needles, waxed thread, etc...
I had a good friend make me a huge tool holder which I needed badly. Now everything is at hand. On the far left, I store various wood carving chisels, clay tools, screwdrivers, and hole punches. Then the various metal stamps start.
<a href="https://flic.kr/p/2iS1EjC" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792711312_b217307d89_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8361A by Chako, on Flickr
The middle part of my stamping organizer...more leather stamps. It is amazing how you can accrue different stamps. With that said, you can do a lot with a basic set of 12 stamps. After a while, getting more just expands your capabilities.
<a href="https://flic.kr/p/2iS1yb5" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792690632_ea9d352599_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8362A by Chako, on Flickr
On the right of the stamping organizer, I keep my swivel knives, modelers, an assortment of needles, and some X-Acto knives.
<a href="https://flic.kr/p/2iRWgYu" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49791855688_d8ba9c7f0e_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8363A by Chako, on Flickr
All you really need is one swivel knife...but to make life easier, it is best with an assortment with different blades. It is a pit of a pain in the butt to exchange the blades during a project. The ceramic blades are my favourites. The edger on the right I use to make nice straight edging lines on projects.
<a href="https://flic.kr/p/2iRZ6d8" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792404811_2bf3dd9c81_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8360A by Chako, on Flickr
There are 2 drawers under the table. On the left, I keep an assortment of tools stored here.
<a href="https://flic.kr/p/2iRWb3m" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49791835728_5ce0d85504_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8353A by Chako, on Flickr
The right side drawer holds all of my boxed sets. These boxed sets can include stamping dies, tools, etc...
<a href="https://flic.kr/p/2iS1Eni" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792711467_1f9b43cfba_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8355A by Chako, on Flickr
I just grabbed a few top ones to show you some of the items inside. Here is a set of various stamps, and the next is a leather punch.
<a href="https://flic.kr/p/2iRZ67b" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792404466_04b7dc1d91_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8356A by Chako, on Flickr
<a href="https://flic.kr/p/2iS1Ecd" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792710882_3b34da01f4_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8358A by Chako, on Flickr
On the back plate, I have most of my hand tools. I tried to set the whole workstation up to ease workflow, or at least my workflow.
<a href="https://flic.kr/p/2iS1ZH7" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792776532_1af35bea34_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8364A by Chako, on Flickr
the central part, the all important hammers. I have my mauls stored on the left of the table next to my stamp organizer.
<a href="https://flic.kr/p/2iRWb9o" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49791836078_c81b375a2f_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8365A by Chako, on Flickr
On the right side, most of my slicing, dicing, scoring, and cutting tools.
<a href="https://flic.kr/p/2iRWgXc" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49791855613_9821584d4a_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8366A by Chako, on Flickr
One thing that I must say, I bought myself a very nice set of 3 under-hanging lights but these never did stay put as the glue on the various Velcro taps gave out due to weight and gravity. Then I stumbled upon these little lights with magnets. Rotate the central button for variable light power. I bought 6 of them and it works great. No more accidents.
-
Very nice Chako. I recall seeing your work as well which was very nice. Have you made anything recently?
-
Awesome tools! 
All my tools fit in a small box so far, but the collection is growing :D
-
Nice workstation!
[It's not failure if you learn something from it]
-
@SirVicaLot said:
Awesome tools! 
All my tools fit in a small box so far, but the collection is growing :D
+1
This is addictive!
:D :D :D :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login