The Victorinox Waiter Appreciation Society
-
I'm gonna check the auction bay, but if anyone knows of a 91mm Waiter (and doesn't want it themselves lol) can ya PM me

-
@GreyLife said:
Hi everyone, this is my first post on this forum. I would like to introduce you to my Nylon Scaled Victorinox Waiter that I have modified to be a 'Plus'. I have owned this SAK for many years, and for a long time it lived in a kitchen drawer! Just over two years ago it became my daily SAK as I started a new job in an office and the Huntsman was a bit too 'outdoorsy' for most people! The Waiter is an ideal 'urban' or office SAK with its small size (one layer and 84mm). However, I felt it needed a little more, so around a year ago I modified the scale to accept the pen and pin, and added the small screwdriver. Enjoy the photos!
Sent from my Nokia 1 using Tapatalk
Nice work! It's a pity Vic doesn't produce 84mm plus scales. Thanks for sharing your method.

-
@TonySal said:
I'm gonna check the auction bay, but if anyone knows of a 91mm Waiter (and doesn't want it themselves lol) can ya PM me
@Frailer said:
Good luck. The 91mm Waiter Plus is the one knife on my wish list that I don’t expect I’ll ever find.How about making one by removing the scissor layer from a Compact?
-
Thanks for all of the positive comments. In reply to the pin hole, I believe the newer cellador scales already have a pin hole. My Waiter is an older nylon scaled 'economy' version from about 18 years ago, so didn't come with the pin hole.
I like the idea of the pointed tweezers - I may have to borrow this modification!
Sent from my Nokia 1 using Tapatalk
-
As my Nylon scales were looking a little worn, and with a bit of time on my hands with the current virus situation. I decided to have a go at making some wood scales. These are my first attempt. I have used some light oak and have made them 'plus' to include pin and pen along with tweezers and toothpick. The scales could do with a little more work as the tools are a bit stiff to remove and replace. Overall I am pleased with the results. Hope you like!

Sent from my Nokia 1 using Tapatalk
-
Front view

Sent from my Nokia 1 using Tapatalk
-
Open view.

Sent from my Nokia 1 using Tapatalk
-
Side view showing the thickness. The oak started at 4mm thick. Now a little less from the sanding, but does create a bit more bulk to the Waiter!

Sent from my Nokia 1 using Tapatalk
-
-
Looks great GreyLife![emoji106]
Sent from my iPhone using Tapatalk
-
Thank you [emoji106]
Sent from my Nokia 1 using Tapatalk
-
@GreyLife said:
Side view showing the thickness. The oak started at 4mm thick. Now a little less from the sanding, but does create a bit more bulk to the Waiter!
Sent from my Nokia 1 using Tapatalk
Very nice GL
I have been thinking of doing a similar mod to my other sak. Do you mind briefly sharing how you did it? Did you use any power tools or just sand paper? Thanks. -
Thanks, no power tools were used! It was mainly done using tools from SwissChamp and Leatherman. The fine finishing was all sandpaper, finishing with 1000 grit paper and teak oil. The grooves for the tools were done with the file/saw from SwissChamp, and for fine finish wrapped sandpaper around the file. To get the initial positions of the rivets, I gently squeezed the SAK and wood in a soft jaw vice and then used the chisel tool from SwissChamp to 'drill' the holes until the wood lay flat against the side of the SAK. Finally I used superglue to hold the scales on. Hope this helps!
Sent from my Nokia 1 using Tapatalk
-
That's an awesome mod Greylife!
-
@GreyLife said:
Thanks, no power tools were used! It was mainly done using tools from SwissChamp and Leatherman. The fine finishing was all sandpaper, finishing with 1000 grit paper and teak oil. The grooves for the tools were done with the file/saw from SwissChamp, and for fine finish wrapped sandpaper around the file. To get the initial positions of the rivets, I gently squeezed the SAK and wood in a soft jaw vice and then used the chisel tool from SwissChamp to 'drill' the holes until the wood lay flat against the side of the SAK. Finally I used superglue to hold the scales on. Hope this helps!Sent from my Nokia 1 using Tapatalk
Thank you GL. This is very helpful. I will get to work soon !
-
...got a Wenger Entree' version. Has no split ring, checked our Wiki but...didn't see anything by phone...just wondering...

-
@roamingcat said:
Picture?...you'll have to settle for the Sak Wiki above. I'm pic challenged right now...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
