SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
DAY 22
ToolChest with other big friends


-
@Rizio Il Ghiro said:
That wine master is calling to me!!Day 22
After yesterday’s sanding, today it’s time to get the job sealed with Danish oil, and the 1L tin I use to work with (it gets refilled from 5L cans which are too heavy to use) always holds on to the plastic inner seal on the screw cap - the SC’s can opener does the honours in popping the seal up and out - and a pic of the table top I’ve been working on!
That looks great!

-
@comis said:
Though the Wine master looks elegant and handle those tasks with ease, the CT could have done the same task just as well too.True, but it would have been a lot less fun. Incidentally, it's quite ironic to hear such comment in a forum like this. Are you suggesting we don't really need all our SAKs and could get along just fine with only one? Heretic!

-
@Rizio Il Ghiro said:
Usually takes about 5 coats to get a water-resistant seal, and a monthly coat to help combat drying out in the sun. Usually gets me to November when the table gets put away until the following spring and a spruce up for coming summer, and so the cycle of life continues! It was a cheapish table, but so far has lasted 15 or so years,, with hopefully a good deal more use in it yet!
:DIf that could keep the table going after 15 years, that's definitely a win!
ToolChest with other big friends

Nice collection of colors!

@SirVicaLot said:
My guess is she did not have THAT in mind...
:DSo glad she ain't interested in reading this forum...shhhh!

@Simon_Templar said:
True, but it would have been a lot less fun. Incidentally, it's quite ironic to hear such comment in a forum like this. Are you suggesting we don't really need all our SAKs and could get along just fine with only one? Heretic!
Wait...is this a trick question to a fellow SAKMC member? :D
-
@Simon_Templar said:
True, but it would have been a lot less fun. Incidentally, it's quite ironic to hear such comment in a forum like this. Are you suggesting we don't really need all our SAKs and could get along just fine with only one? Heretic!
Heretic!

:D
-
-
Day 22
Needed a phillips for multiple screws to get to a AC filter, I used and compared a CT-S with SC for the job. And I think for the larger philips head, I still prefer the inline phillips for EDC use. The extra leverage and options for bits from the mini screwdriver on CT are nice, but the difference is not substantial enough to justify the extra width or replacing the magnifying glass for me.

-
@SirVicaLot said:
I don‘t know what you are talking about. I also have no recollection of any events resulting in that order...
Sounds like something these troopers would say after the audition... :D

-
Don‘t do that. Storm Troopers are not supposed to dance

I blame Disney for this nonsense

-
Day 22
SC and Seiko 5

Used the small blade to open a bog of dog food, and the scissors to cut the tag. It‘s a buy 10 get 1 free kinda deal, so we need to save the tags.
-
Needed a phillips for multiple screws to get to a AC filter, I used and compared a CT-S with SC for the job. And I think for the larger philips head, I still prefer the inline phillips for EDC use. The extra leverage and options for bits from the mini screwdriver on CT are nice, but the difference is not substantial enough to justify the extra width or replacing the magnifying glass for me.

That's an interesting observation. I keep thinking about whether the bit driver is better to have than the magnifier/ Philips combo. Problem is, you cannot get it together with pliers (which I like to have) in anything smaller than the SC :(
-
@SirVicaLot said:
Day 22SC and Seiko 5

Used the small blade to open a bog of dog food, and the scissors to cut the tag. It‘s a buy 10 get 1 free kinda deal, so we need to save the tags.
Nice watch, SirVicaLot - lovely pic too! I had a Seiko 5 when I was 16 (bought just after the Master Craftsman/Astronaut) and I still have it somewhere, though the original bracelet got wrecked on steel shelving..... I must dig it out and post a pic with Master Craftsman/Astronaut as an EDC combo of yesteryear! :D
-
Day 22 of 30
Sharpened my SwissChamps blade with dual sharpener stone and finished with wet sand paper P2000

Only Tools Matters
-
@Rizio Il Ghiro said:
Nice watch, SirVicaLot - lovely pic too! I had a Seiko 5 when I was 16 (bought just after the Master Craftsman/Astronaut) and I still have it somewhere, though the original bracelet got wrecked on steel shelving..... I must dig it out and post a pic with Master Craftsman/Astronaut as an EDC combo of yesteryear! :DYes you need to

-
@SirVicaLot said:
Day 22SC and Seiko 5

Used the small blade to open a bog of dog food, and the scissors to cut the tag. It‘s a buy 10 get 1 free kinda deal, so we need to save the tags.
Beautiful and classy! I remembered eyeing this series long, long time ago.
@Simon_Templar said:
That's an interesting observation. I keep thinking about whether the bit driver is better to have than the magnifier/ Philips combo. Problem is, you cannot get it together with pliers (which I like to have) in anything smaller than the SC :(That's true. I was wondering whether it's worth the effort to take apart a CT-S and transplant one into a Mountaineer. But I'm still not convinced it's any better than the inline phillips I always love on SC.
@Rizio Il Ghiro said:
Nice watch, SirVicaLot - lovely pic too! I had a Seiko 5 when I was 16 (bought just after the Master Craftsman/Astronaut) and I still have it somewhere, though the original bracelet got wrecked on steel shelving..... I must dig it out and post a pic with Master Craftsman/Astronaut as an EDC combo of yesteryear! :D

@Antti Lammi said:
Day 22 of 30Sharpened my SwissChamps blade with dual sharpener stone and finished with wet sand paper P2000

Only Tools Matters
Never tried this Vic sharpener, how does it compare to other sharpener/stone you have used in the past?

-
@comis said:
Never tried this Vic sharpener, how does it compare to other sharpener/stone you have used in the past?
Actually bit better than my last stone i used, loved how easy is to sharpen with this, tho i didnt use ceramic discs to finish job, used sandpaper to finish it.
Gotta recommend dual sharpener , easy to carry and makes blade sharp again pretty easily. I tend to use blade bit roughly sometimes so i dont make them too sharp on those tools what i use at work.
Only Tools Matters
-
Day 22
It wasn't until I got the in-line awl on the Solider that I started getting in the habit of using it. Turns out, it's a great way to save the tip of the blade, and keep from gunking it up with glue from tape.
Opened a box of take out for lunch today.

Corkscrew /
Phillips \
-
Same story here. Never used it for that purpose until I got the Pioneer. Gotta say though, imho the inline awl is far better than the backside awl.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
