SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
Don‘t do that. Storm Troopers are not supposed to dance

I blame Disney for this nonsense

-
Day 22
SC and Seiko 5

Used the small blade to open a bog of dog food, and the scissors to cut the tag. It‘s a buy 10 get 1 free kinda deal, so we need to save the tags.
-
Needed a phillips for multiple screws to get to a AC filter, I used and compared a CT-S with SC for the job. And I think for the larger philips head, I still prefer the inline phillips for EDC use. The extra leverage and options for bits from the mini screwdriver on CT are nice, but the difference is not substantial enough to justify the extra width or replacing the magnifying glass for me.

That's an interesting observation. I keep thinking about whether the bit driver is better to have than the magnifier/ Philips combo. Problem is, you cannot get it together with pliers (which I like to have) in anything smaller than the SC :(
-
@SirVicaLot said:
Day 22SC and Seiko 5

Used the small blade to open a bog of dog food, and the scissors to cut the tag. It‘s a buy 10 get 1 free kinda deal, so we need to save the tags.
Nice watch, SirVicaLot - lovely pic too! I had a Seiko 5 when I was 16 (bought just after the Master Craftsman/Astronaut) and I still have it somewhere, though the original bracelet got wrecked on steel shelving..... I must dig it out and post a pic with Master Craftsman/Astronaut as an EDC combo of yesteryear! :D
-
Day 22 of 30
Sharpened my SwissChamps blade with dual sharpener stone and finished with wet sand paper P2000

Only Tools Matters
-
@Rizio Il Ghiro said:
Nice watch, SirVicaLot - lovely pic too! I had a Seiko 5 when I was 16 (bought just after the Master Craftsman/Astronaut) and I still have it somewhere, though the original bracelet got wrecked on steel shelving..... I must dig it out and post a pic with Master Craftsman/Astronaut as an EDC combo of yesteryear! :DYes you need to

-
@SirVicaLot said:
Day 22SC and Seiko 5

Used the small blade to open a bog of dog food, and the scissors to cut the tag. It‘s a buy 10 get 1 free kinda deal, so we need to save the tags.
Beautiful and classy! I remembered eyeing this series long, long time ago.
@Simon_Templar said:
That's an interesting observation. I keep thinking about whether the bit driver is better to have than the magnifier/ Philips combo. Problem is, you cannot get it together with pliers (which I like to have) in anything smaller than the SC :(That's true. I was wondering whether it's worth the effort to take apart a CT-S and transplant one into a Mountaineer. But I'm still not convinced it's any better than the inline phillips I always love on SC.
@Rizio Il Ghiro said:
Nice watch, SirVicaLot - lovely pic too! I had a Seiko 5 when I was 16 (bought just after the Master Craftsman/Astronaut) and I still have it somewhere, though the original bracelet got wrecked on steel shelving..... I must dig it out and post a pic with Master Craftsman/Astronaut as an EDC combo of yesteryear! :D

@Antti Lammi said:
Day 22 of 30Sharpened my SwissChamps blade with dual sharpener stone and finished with wet sand paper P2000

Only Tools Matters
Never tried this Vic sharpener, how does it compare to other sharpener/stone you have used in the past?

-
@comis said:
Never tried this Vic sharpener, how does it compare to other sharpener/stone you have used in the past?
Actually bit better than my last stone i used, loved how easy is to sharpen with this, tho i didnt use ceramic discs to finish job, used sandpaper to finish it.
Gotta recommend dual sharpener , easy to carry and makes blade sharp again pretty easily. I tend to use blade bit roughly sometimes so i dont make them too sharp on those tools what i use at work.
Only Tools Matters
-
Day 22
It wasn't until I got the in-line awl on the Solider that I started getting in the habit of using it. Turns out, it's a great way to save the tip of the blade, and keep from gunking it up with glue from tape.
Opened a box of take out for lunch today.

Corkscrew /
Phillips \
-
Same story here. Never used it for that purpose until I got the Pioneer. Gotta say though, imho the inline awl is far better than the backside awl. -
Day 22
Applied some oil to all implements after cleaning. Now it's running smooth again. Like new!

-
@CraftsmanSAK said:
Awesome tip and technique! I have a few others I really need to get some brass rod just for things like this.Thanks Craftsman.

The trouble is getting the 2.2mm brass rod. I am very fortunate to have a friend that’s real old-school and makes his own wire, and made some up for me /post/2022950
-
Day 22
I used the main blade to cut my afternoon snack in half. Peanut butter and cayenne pepper. Mmmm. -
@comis said:
...
Hey, Max. Did you ever try modding the led module with a brighter led? That's something I have meant to do forever, but never get around to.
:DHi comis, it should be the same as the grey module, the design seems identical other than the clear plastic. I only have my XAVT and Expedition Lite with the new module, so a little hesitant to take either of these apart.

But I think what you mean is putting a brighter LED in? No, not tried that...but should be possible if you can source the right LED.
-
Day 22
The SC helped cut a little breakfast snack

Then needed the help of the CT bit driver to reverse the clip on my new knife

-
@Simon_Templar said:
That's an interesting observation. I keep thinking about whether the bit driver is better to have than the magnifier/ Philips combo. Problem is, you cannot get it together with pliers (which I like to have) in anything smaller than the SC :(I also consider the inline Phillips a better tool than the bit driver for my needs.

You could swap the scrapy thing from an Angler with the Phillips from an Explorer. Would give you inline Phillips and pliers in 4 layers (+ a Climber left over). -
@SirVicaLot said:
Same story here. Never used it for that purpose until I got the Pioneer. Gotta say though, imho the inline awl is far better than the backside awl.
my dilemma is that I like the inline awl and the small blade...but you can thin down the Pioneer awl and drop it in as a replacement.
-
Day 22
CT Lite handing over to CT-41. Even though the 41 is the big brother, the Lite is a smidge wider because of the LED module!


-
DAY 22
Tightening down a throttle cable adjustment.
-
Day 22
Challenged by Comis, I opened another bottle of wine today, this time with the CT Lite. I managed, of course, but not in style.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login