SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
@Rizio Il Ghiro said:
Nice watch, SirVicaLot - lovely pic too! I had a Seiko 5 when I was 16 (bought just after the Master Craftsman/Astronaut) and I still have it somewhere, though the original bracelet got wrecked on steel shelving..... I must dig it out and post a pic with Master Craftsman/Astronaut as an EDC combo of yesteryear! :DYes you need to

-
@SirVicaLot said:
Day 22SC and Seiko 5

Used the small blade to open a bog of dog food, and the scissors to cut the tag. It‘s a buy 10 get 1 free kinda deal, so we need to save the tags.
Beautiful and classy! I remembered eyeing this series long, long time ago.
@Simon_Templar said:
That's an interesting observation. I keep thinking about whether the bit driver is better to have than the magnifier/ Philips combo. Problem is, you cannot get it together with pliers (which I like to have) in anything smaller than the SC :(That's true. I was wondering whether it's worth the effort to take apart a CT-S and transplant one into a Mountaineer. But I'm still not convinced it's any better than the inline phillips I always love on SC.
@Rizio Il Ghiro said:
Nice watch, SirVicaLot - lovely pic too! I had a Seiko 5 when I was 16 (bought just after the Master Craftsman/Astronaut) and I still have it somewhere, though the original bracelet got wrecked on steel shelving..... I must dig it out and post a pic with Master Craftsman/Astronaut as an EDC combo of yesteryear! :D

@Antti Lammi said:
Day 22 of 30Sharpened my SwissChamps blade with dual sharpener stone and finished with wet sand paper P2000

Only Tools Matters
Never tried this Vic sharpener, how does it compare to other sharpener/stone you have used in the past?

-
@comis said:
Never tried this Vic sharpener, how does it compare to other sharpener/stone you have used in the past?
Actually bit better than my last stone i used, loved how easy is to sharpen with this, tho i didnt use ceramic discs to finish job, used sandpaper to finish it.
Gotta recommend dual sharpener , easy to carry and makes blade sharp again pretty easily. I tend to use blade bit roughly sometimes so i dont make them too sharp on those tools what i use at work.
Only Tools Matters
-
Day 22
It wasn't until I got the in-line awl on the Solider that I started getting in the habit of using it. Turns out, it's a great way to save the tip of the blade, and keep from gunking it up with glue from tape.
Opened a box of take out for lunch today.

Corkscrew /
Phillips \
-
Same story here. Never used it for that purpose until I got the Pioneer. Gotta say though, imho the inline awl is far better than the backside awl. -
Day 22
Applied some oil to all implements after cleaning. Now it's running smooth again. Like new!

-
@CraftsmanSAK said:
Awesome tip and technique! I have a few others I really need to get some brass rod just for things like this.Thanks Craftsman.

The trouble is getting the 2.2mm brass rod. I am very fortunate to have a friend that’s real old-school and makes his own wire, and made some up for me /post/2022950
-
Day 22
I used the main blade to cut my afternoon snack in half. Peanut butter and cayenne pepper. Mmmm. -
@comis said:
...
Hey, Max. Did you ever try modding the led module with a brighter led? That's something I have meant to do forever, but never get around to.
:DHi comis, it should be the same as the grey module, the design seems identical other than the clear plastic. I only have my XAVT and Expedition Lite with the new module, so a little hesitant to take either of these apart.

But I think what you mean is putting a brighter LED in? No, not tried that...but should be possible if you can source the right LED.
-
Day 22
The SC helped cut a little breakfast snack

Then needed the help of the CT bit driver to reverse the clip on my new knife

-
@Simon_Templar said:
That's an interesting observation. I keep thinking about whether the bit driver is better to have than the magnifier/ Philips combo. Problem is, you cannot get it together with pliers (which I like to have) in anything smaller than the SC :(I also consider the inline Phillips a better tool than the bit driver for my needs.

You could swap the scrapy thing from an Angler with the Phillips from an Explorer. Would give you inline Phillips and pliers in 4 layers (+ a Climber left over). -
@SirVicaLot said:
Same story here. Never used it for that purpose until I got the Pioneer. Gotta say though, imho the inline awl is far better than the backside awl.
my dilemma is that I like the inline awl and the small blade...but you can thin down the Pioneer awl and drop it in as a replacement.
-
Day 22
CT Lite handing over to CT-41. Even though the 41 is the big brother, the Lite is a smidge wider because of the LED module!


-
DAY 22
Tightening down a throttle cable adjustment.
-
Day 22
Challenged by Comis, I opened another bottle of wine today, this time with the CT Lite. I managed, of course, but not in style.


-
Day 22. In my spare time; I got started on getting the Marklin set up and running. The reversing mechanism is fine. Turns out, I just didn't understand my transformer. Turning the dial all the way to the left just switched the direction one way or another, and the throttle still worked either way.
Track ends were FUBAR. Most were bent and twisted at least 20 degrees; and the connectors were mangled. Had to use the pliers to try to straighten them up enough to connect. I am buying new connectors, and will eventually change out the track if I can't fix it. Didn't take a photo then...
Axles had fell off the coaches in transit, and I used the pliers again to bend the fixed trucks just enough to hold them on better.
To decouple the cars when switching from shunting to pulling, , I used the CT driver. Works pretty good.
All set up. Due to the wrecked track ends, it runs rough and details constantly. Thus a LOT of work to go. Despite who knows how much abuse and neglect, everything mechanically and electrical is perfect, however. German engineering and manufacturing at it's finest.
-
@Antti Lammi said:
Actually bit better than my last stone i used, loved how easy is to sharpen with this, tho i didnt use ceramic discs to finish job, used sandpaper to finish it.Gotta recommend dual sharpener , easy to carry and makes blade sharp again pretty easily. I tend to use blade bit roughly sometimes so i dont make them too sharp on those tools what i use at work.
Only Tools Matters
What will be your go to for dual sharpener? I love the Spyderco double stuff and DMT double sided pedal, those works great.
@ElevenBlade said:
Day 22It wasn't until I got the in-line awl on the Solider that I started getting in the habit of using it. Turns out, it's a great way to save the tip of the blade, and keep from gunking it up with glue from tape.
Opened a box of take out for lunch today.

Corkscrew /
Phillips \I kept reading about this and meant to do the same, but have been using the blades for the jobs for years and that old habit dies hard.

Applied some oil to all implements after cleaning. Now it's running smooth again. Like new!
I have always been told to take care of the tool, then it will take care of me when needed.@Alan K. said:
Day 22
I used the main blade to cut my afternoon snack in half. Peanut butter and cayenne pepper. Mmmm.Anything spicy is Mmmmm in my book.

@Sos24 said:
Day 22
The SC helped cut a little breakfast snack
[IMG]https://uploads.tapatalk-cdn.com/20200422/c27d10cf0680d9b46dff221641a38293.jpg
Then needed the help of the CT bit driver to reverse the clip on my new knife
[IMG]https://uploads.tapatalk-cdn.com/20200422/549aa9de385b2038c5532d47bf9a73bf.jpgLooks great! I don't know what got into me, but I've been craving some steak lately. And when I saw your post, I could have sworn I read breakfast steak and my eyes just rolled open wide.

@Max Stone said:
Hi comis, it should be the same as the grey module, the design seems identical other than the clear plastic. I only have my XAVT and Expedition Lite with the new module, so a little hesitant to take either of these apart.
But I think what you mean is putting a brighter LED in? No, not tried that...but should be possible if you can source the right LED.
Yes, swap in a brighter led, I don't use the led on SAK often enough, and do think their led choice was never really bright. It'd be great if they could install a small led light in the scale of 91mm though.

-
@Max Stone said:
Day 22CT Lite handing over to CT-41. Even though the 41 is the big brother, the Lite is a smidge wider because of the LED module!


@CraftsmanSAK said:
DAY 22Tightening down a throttle cable adjustment.
I have seen parts of the ride here and there, will we be seeing the whole picture sometime?

@Simon_Templar said:
Day 22Challenged by Comis, I opened another bottle of wine today, this time with the CT Lite. I managed, of course, but not in style.
Whatever lacking in style, your willingness to do it with the CT definitely makes up for it.
Now I am inspired to open a bottle sometime soon! :D@cody6268 said:
Day 22. In my spare time; I got started on getting the Marklin set up and running. The reversing mechanism is fine. Turns out, I just didn't understand my transformer. Turning the dial all the way to the left just switched the direction one way or another, and the throttle still worked either way.Track ends were FUBAR. Most were bent and twisted at least 20 degrees; and the connectors were mangled. Had to use the pliers to try to straighten them up enough to connect. I am buying new connectors, and will eventually change out the track if I can't fix it. Didn't take a photo then...
Axles had fell off the coaches in transit, and I used the pliers again to bend the fixed trucks just enough to hold them on better.
To decouple the cars when switching from shunting to pulling, , I used the CT driver. Works pretty good.
All set up. Due to the wrecked track ends, it runs rough and details constantly. Thus a LOT of work to go. Despite who knows how much abuse and neglect, everything mechanically and electrical is perfect, however. German engineering and manufacturing at it's finest.
Back then when hobby shops are more common, I used to watch all those really cool train tracks and get endless amusement by that. Sometimes it's not even just about the train set, but all the detail works painstakingly put in to make it real. -
Day 23
CT-41 cutting some old cucumber for the bird feeder.


-
DAY 23
SC with some friends



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


