Free P4 pliers stiffness after moderate or heavy use
-
My replacement P2 came in today. It looks like a new one, hard to tell really.
Not sure what I’ll do with it yet, maybe just use it for a while to see how it goes. It is an interesting design to fiddle with.
-
-
That’s encouraging. If they fix it and it just becomes a matter of being without a tool for a few days, I’m okay with that. It’s not great and the QC must improve, but when they fix it at no cost, I am happy they stand by their product in that sense
-
You know what I came up to recently... I don’t have a Free LM. I do have a Wave that I upgraded with a 154cm Charge blade myself after the stock blade chipped a few times without being used at all(!!!).
I didn’t have any issues with it afterwards, though a closed tool does scratch my hands when I use a screwdriver with an extender plugged in which is a sign of a bit poorly designed product. But that’s it - cuts nails and wire and works perfectly fine.
Then I got a used 0697 Micra - a tiny piece of quality - what more can I say. Love it.
I bought a Signal about a year ago. In two days I got it replaced because the saw and the blade won’t stay locked. The replacement started doing just that in a few days too and I had to fix it myself bending the liners. The Signal also has stiff pliers that cut even tiny nails and regular wires way worse than the Wave and despite all lubrications and trying to work it in the pliers remain stiff.
I bought a Vic Forester between the Wave and a Signal and brought it to Alps twice - on Tour du Mont Blanc and the Mont Blanc ascent as well.
It did help one of us a lot fixing a loose flashlight screw during the toughest part of the Mont Blanc ascent which happens at night - you can’t really climb rocks when you can’t see where you’re going.I didn’t expect much improvised usage of the Forester due to it’s simplicity, though did prefer the saw and screwdrivers on LMs because they lock (sometimes).
Then I watched some Felix Immler guides on using SAKs. Then I bought a Work Champ. Figured ways to use the saw right with a fire steel and not needing it to lock. Using the can opener as a screwdriver not fearing it will collapse into my fingers. Then I started using it even more. Now I just can’t believe I didn’t do it earlier - Vic is so dramatically superior in quality than LM in every single aspect to me as I use the tools. It’s just better designed, more convenient, easier and therefore more enjoyable. Don’t think I’ll get more LMs in the future...
-
@Mcfal12 said:
That’s encouraging. If they fix it and it just becomes a matter of being without a tool for a few days, I’m okay with that. It’s not great and the QC must improve, but when they fix it at no cost, I am happy they stand by their product in that senseThey exchanged it for a fresh one and I’m happy with that. I don’t know if there have been any changes to the design, and if there were I kinda doubt the revised models would have made it over here already.
At the very least it is a failed P2 that will show up in the statistics at Leatherman headquarters. If the return rate is high surely some corrective action will be taken.
Most customers probably only buy one or maybe two LM tools in a lifetime. Between the price point, their reputation and the 25 year warranty they should be expected to last a lifetime. It is nice how they really do stand behind their products if something does go wrong.
-
I bought a new Leatherman Free P4 and it arrived today. It cut 4d and 8d nails. The pliers did not bind up. I also tried squeezing the handles as hard as I could without cutting anything. Still, no binding. So far, so good.

-
Good news at least

-
@nitram said:
My replacement P2 came in today. It looks like a new one, hard to tell really.Not sure what I’ll do with it yet, maybe just use it for a while to see how it goes. It is an interesting design to fiddle with.
You can just try to squeeze the pliers and you will have an answer right away!
-
@Mcfal12 said:
For what it is worth, this issue is not isolated to just cutting with your P2 (or possibly P4- I only own a P2). Just gripping anything semi tightly with the pliers binds them up. I have had success loosening them by wriggling the handles as has been described. I have tried several different oils thinking, perhaps, the issue was not enough lubricant. None of the various oils (Hoppes, WD 40, Tri Flow, 3 in 1) has seemed to solve it.I can also confirm that when I received mine, also purchased via Amazon as someone else mentioned, there was a substantial amount of grease on the pliers head.
So one trick that has worked for me to loosen the pliers when they stiffen has been to do the following: open the tool so that that handles are in line. At this point the pliers are sticking up out of the handle, I then turn the pliers face down and rapidly pull the handle apart several times. This opens and closes the pliers, and seems to consistently remove the stiffness. I am going to keep doing this as long as I can tolerate the aggravation and the the tool is not completely frozen up, over hitting my tool with a hammer. Rightly I should send it back, but I am not risking leatherman marring up my tool by hitting it with a hammer.
I am not however writing off LM entirely, I have a number of tools I love and I think they continue to push the technology, capability and industry forward; but they clearly have a considerable issue and the responses reported by their customer service are less than ideal (conscience that may be overly kind in that assessment)
I have to say I am thrilled I joined this forum. Amongst other things I learned from all the great people here, one is that this issue with the P2 is not isolated to just me.
Thanks for being such a great group!
The method with pulling the handles works - I tried it with my Signal - the gunk started to appear right away and the pliers loosened just a slightest bit. Should do more of this later.

-
@alexanderre said:
The method with pulling the handles works - I tried it with my Signal - the gunk started to appear right away and the pliers loosened just a slightest bit. Should do more of this later.Glad to hear that. I sorta jinxed myself. since posting this I feel like the couple of times I’ve tried this, my pliers haven’t loosened as much as in the past. It’s subjective though and possibly since I used the wave the other day, which are perfect, that’s there is an unconscious bias there.
-
Mine is now so tight I can't even open the pliers anymore, completely seized.
So what have you done with it Martin? Well, I cut a couple of zip ties... Fairly thick ones, but still, just plastic zip ties. It got a little tighter after the second one and by number four the party was over. It's not like I'm Hercules or abusing the tool, this is absolutely ridiculous.
I'm not going to sit around and fiddle with this thing anymore, I'm completely done with it. Good thing these are such cheap tools, even better the manufacturer isn't selling them as the best thing since slice bread, right?

-
oops, accidentally quoted myself.

-
@nitram said:
Mine is now so tight I can't even open the pliers anymore, completely seized.So what have you done with it Martin? Well, I cut a couple of zip ties... Fairly thick ones, but still, just plastic zip ties. It got a little tighter after the second one and by number four the party was over. It's not like I'm Hercules or abusing the tool, this is absolutely ridiculous.
I'm not going to sit around and fiddle with this thing anymore, I'm completely done with it. Good thing these are such cheap tools, even better the manufacturer isn't selling them as the best thing since slice bread, right?

I'm sorry for your troubles. :( -
So the method described earlier doesn't work?
-
@Mechanickal said:
So the method described earlier doesn't work?I haven’t tried the method that involves a hammer.
Everything else I’ve tried on the previous one, including all kinds of oil and cleaning and polishing compound. This one is so tight the handles fold when you try to open it.
-
@nitram said:
I haven’t tried the method that involves a hammer.
Everything else I’ve tried on the previous one, including all kinds of oil and cleaning and polishing compound. This one is so tight the handles fold when you try to open it.
Horizontal handles and keep pulling/pushing them open and closed
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login