Free P4 pliers stiffness after moderate or heavy use
-
@nitram said:
My replacement P2 came in today. It looks like a new one, hard to tell really.Not sure what I’ll do with it yet, maybe just use it for a while to see how it goes. It is an interesting design to fiddle with.
You can just try to squeeze the pliers and you will have an answer right away!
-
@Mcfal12 said:
For what it is worth, this issue is not isolated to just cutting with your P2 (or possibly P4- I only own a P2). Just gripping anything semi tightly with the pliers binds them up. I have had success loosening them by wriggling the handles as has been described. I have tried several different oils thinking, perhaps, the issue was not enough lubricant. None of the various oils (Hoppes, WD 40, Tri Flow, 3 in 1) has seemed to solve it.I can also confirm that when I received mine, also purchased via Amazon as someone else mentioned, there was a substantial amount of grease on the pliers head.
So one trick that has worked for me to loosen the pliers when they stiffen has been to do the following: open the tool so that that handles are in line. At this point the pliers are sticking up out of the handle, I then turn the pliers face down and rapidly pull the handle apart several times. This opens and closes the pliers, and seems to consistently remove the stiffness. I am going to keep doing this as long as I can tolerate the aggravation and the the tool is not completely frozen up, over hitting my tool with a hammer. Rightly I should send it back, but I am not risking leatherman marring up my tool by hitting it with a hammer.
I am not however writing off LM entirely, I have a number of tools I love and I think they continue to push the technology, capability and industry forward; but they clearly have a considerable issue and the responses reported by their customer service are less than ideal (conscience that may be overly kind in that assessment)
I have to say I am thrilled I joined this forum. Amongst other things I learned from all the great people here, one is that this issue with the P2 is not isolated to just me.
Thanks for being such a great group!
The method with pulling the handles works - I tried it with my Signal - the gunk started to appear right away and the pliers loosened just a slightest bit. Should do more of this later.

-
@alexanderre said:
The method with pulling the handles works - I tried it with my Signal - the gunk started to appear right away and the pliers loosened just a slightest bit. Should do more of this later.Glad to hear that. I sorta jinxed myself. since posting this I feel like the couple of times I’ve tried this, my pliers haven’t loosened as much as in the past. It’s subjective though and possibly since I used the wave the other day, which are perfect, that’s there is an unconscious bias there.
-
Mine is now so tight I can't even open the pliers anymore, completely seized.
So what have you done with it Martin? Well, I cut a couple of zip ties... Fairly thick ones, but still, just plastic zip ties. It got a little tighter after the second one and by number four the party was over. It's not like I'm Hercules or abusing the tool, this is absolutely ridiculous.
I'm not going to sit around and fiddle with this thing anymore, I'm completely done with it. Good thing these are such cheap tools, even better the manufacturer isn't selling them as the best thing since slice bread, right?

-
oops, accidentally quoted myself.

-
@nitram said:
Mine is now so tight I can't even open the pliers anymore, completely seized.So what have you done with it Martin? Well, I cut a couple of zip ties... Fairly thick ones, but still, just plastic zip ties. It got a little tighter after the second one and by number four the party was over. It's not like I'm Hercules or abusing the tool, this is absolutely ridiculous.
I'm not going to sit around and fiddle with this thing anymore, I'm completely done with it. Good thing these are such cheap tools, even better the manufacturer isn't selling them as the best thing since slice bread, right?

I'm sorry for your troubles. :( -
So the method described earlier doesn't work?
-
@Mechanickal said:
So the method described earlier doesn't work?I haven’t tried the method that involves a hammer.
Everything else I’ve tried on the previous one, including all kinds of oil and cleaning and polishing compound. This one is so tight the handles fold when you try to open it.
-
@nitram said:
I haven’t tried the method that involves a hammer.
Everything else I’ve tried on the previous one, including all kinds of oil and cleaning and polishing compound. This one is so tight the handles fold when you try to open it.
Horizontal handles and keep pulling/pushing them open and closed
-
@Mechanickal said:
Horizontal handles and keep pulling/pushing them open and closedThat's really hard to do with the way the Free is constructed.
They are moving again, I squeezed a wooden dowel really hard in the crimper area, applied some thin oil and it's moving again. Interestingly hardly any gunk came out of the pivot.
Now here's the fun part; this process can be replicated. A hard squeeze with the pliers locks them up, hard squeeze in the crimper area and the move again.
-
That's... Odd
-
Glad to read about Sam's method which is fairly interesting. Also Mcfal12's method(which helped in my case when I 'firm hand shake' my P4 and showing first sign of binding) and NetsNJ's method are also both great.
I am sure LM is a stand up company, and if you could get it serviced, probably best to take advantage of that warranty program. Otherwise, all the ingenious solutions here are real life savers.
-
For what's it's worth, my P2 binds, my P4 doesn't. Some of my waves do, some don't. I'm super curious about the cause. Just got some PST IIs in the mail. Squeeze as hard as you want - no flex, no binding.
-
@AimlessWanderer said:
If I had to guess (and without taking an angle grinder to one, that's all I can do), I'd say it's due to the shave of the void that the plier rivet is formed into. Specifically, having too obtuse an angle at the bottom of the void.Excuse the quality of the attached sketch, it was just freehand. Note on the top illustration, the void is a 90o countersink. This leaves a 45o angle on rivet and plier head from the plane on which the two halves of the plier head rub. Squeezing the pliers forces each half of the plier head in a shear action onto either side of the rivet, wedging the upper plier half between the lower plier half, and the 45o angle of the rivet head. At 45o or larger, the head shouldn't lock.
On the second illustration, a 120o or larger countersink, would leave a 30o included angle or less between mating plier faces and the rivet head. The smaller that angle, the more it will lock up like a Morse taper. Polishing it won't help either. It will just increase the amount of surface area in contact, and possibly make it worse - unless the vertical play is greater than the horizontal play.
This is all purely speculative, and one would hope that a 30+ year manufacturer of pliers wouldn't make such a fundamental error, that the numpty typing this, who's never made a pair of pliers in his life, can spot.

So, as I say, this is complete guesswork, and I might be barking up a lamppost, mistaking it for a tree. If however I am right, this needs a fundamental redesign. As for fixing pliers you already own, the only solution I can think of is to stretch/sprain the rivet pin, so those two faces are slightly too far apart to jam up in. However, this would also adversely affect wire cutting, particularly on fine stranded wire.
This is my first post here, so hi
I have a P2 arriving the coming week and started reading up which brought me here.
Reading your post I think your theory is spot on, explains why when even squeezing another tool like the surge I have here with alot of force, the pivot is tightened (presumably by being pushed out by a miniscule amount), pulling the plier jaws together either making them a little snugger, all the way to the P2/P4 problem your facing of locking up tight. It explains why leatherman marketed the P2/P4 as the "strongest pliers ever", and it would also explain why either hammering or working the tool by wiggling the handles/jaws, or twisting would reseat the pivot and give you the looseness back. The difference is with the surge I have it make a full on death grip, but the free series it doesn't take much, and seems to lock up much tighter on the free series.
What I'm not sure about is when you said polishing would make it worse rather than better due to contact area. In my mind it's true... But only half the time. From my understanding lapping the inside of the pivot just working it wouldn't serve as to wear down anything productive all the time it's freely moving. What I'm suggesting is a gradual improvement IF you are lapping when it's jammed up and stiff to open/close. The theory being that it will be grinding the riveted edge of the pin where it jams rather than the centre points where it's already loose enough to close with ease. I THINK it would make for a little more slack, and taking significantly more force to jam up (or ideally, alot of force to get slightly snug).The best way I can think to test this is (if someone wants to jump in and check before mine arrives) to clamp the tool in a vice with the fixed pivot side (fixed to and moves with the jaw) is unsupported, with a socket or ring around it supporting the jaw, but nothing touching the pivot.
On the other side of the vice, there should be something hard (a nut maybe?) putting all the pressure solely on the moving side of the pivot (the jaw moves independent to this side, and rotates around it) and not on the jaw surrounding.
When the vice is loose one side of the pliers will be freely opening and closing the unsupported jaw, but when tightened the pliers will lock up (again that's if my theory is correct, in which case only tighten the vice untill the pivot gets tight, don't crank it like your life depends on it!).If they do lock up (and the theory checks out), then I would put lapping compound in and work the tool, which should grind the contact of the riveted side of the pivot against the jaw. I would then work it untill the action started to get somewhat looser. Once the jaw is moving ok, I'd then flush the compound out however was appropriate and oil up with a thin lube.
After this I would go BACK to the vice (hey, I didn't say it would be quick) and reverse the way it was being held, putting the spacer around the side of the pivot the jaw moves around, and the nut against the fixed side of the pivot. Then tighten the vice up to around the same pressure it took initially and (if my theory holds true) there should be noticeable improvement in stiffness when cutting wire/nails/your ex's break cable. (To clarify - that was a joke, you should never cut nails with your leatherman)That's the idea atleast, and if my P2 jams up, I will be trying. Sorry for the long read

-
Welcome to the forum!
Very intriguing read!
-
Thanks for the warm welcome!
Re-reading my post, I'm noticing quite how bad my grammar and explanations are - I apologize if it causes any undue confusion. I would edit it to make more sense but can't seem to see the button

In order to clarify what I'm saying please read on -In the vice, the side of the pliers with the pivot fixed in place to the jaw should be supported, but the pivot shouldn't be. I'm thinking a socket larger than the pivot with some tape to avoid scuffing would work well.On the other side, where the plier jaw freely rotates around the pivot, the vice should only be touching the pivot and not the jaw it's self. I would think a small nut (again with some tape to prevent scratches), or the end of a wooden dowel would do the trick nicely.
This means that when the vice is loose the pliers should open and close freely.If my theory is correct then tightening the vice should snug up the pivot and make it stiff in the same way cutting a nail would. If that's the case then mixing a little lapping compound/polishing powder (if possible a medium grit) and alcohol/acetone/thin oil will make for a lapping liquid of sorts, which when applied will allow the compound to fill any gaps in the pivot area. While the vice is still tight and the compound has been put in, I would start to open and close the pliers (even if that meals putting a length of pipe over each of the plier jaws for more leverage) in order to get the compound to do its job and grind/polish the really tight areas.
Hope that made more sense - I need to learn to proof read an awful lot more!
-
Mrs. Fool gave me a P2 for my birthday yesterday. (REALLY wasn't expecting it) I too have a problem with the pliers getting hard to open after using some pressure on them. I'm thinking about sending them back. My question is this,
When you send something back do you make a reference about this forum, and/or about the same issues the other members are having with them?
-
Congrats on the new tool
sorry about the problems though
You can always reference th forum like that but I am not sure if they pay attention to that in the Waranty Dept. or not
Never hurt to link them to threads like this though
That way they can't say they don't know about the problem (well at least after they have read this thread or similar ones
) :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login