Scalpel Holders for Wave/Charge
-
I don’t fancy going to prison or be on
probation for having a locking knife on me
Unfortunately we have a big problem
with people stabbing each other
And this has ruined it for everyone elseAnd of course you get a nice large fine for carrying as well
-
@Mcfal12 said:
Gotcha. Thanks for the education. That seems like a strange law and one that is more dangerous during legal useSome areas of the US have similar laws - it can be hard to keep track. I found out years after the fact, that my LM Wave was illegal at the time I carried it, although justifiable because I used it for work.
So I've been doing some reading.
Same in the UK, as I understand. What have safety locks got to do with anything? You may ask. Knives are subject to the "good reason" restriction (in the UK and some of urban US) You have to have a "good reason" to carry the type you have on you, The trouble is a knife with a locking blade would have to meet the criteria for a "good reason" to carry a fixed blade... since it's "fixed" at the time of use. Part of the "good reason" has to be that you went through the idea of potentially carrying a smaller slipjoint, and tossed it out - your good reason has to include the reasoning that a slipjoint is inadequate.
Of course this concept is full of problems. What is meant to simplify the laws in the books - thereby streamlining their enforcement in the field - makes a LM Wave illegal - though its about 500 paces away from a fixed blade. Meanwhile, there are plenty of good reasons to carry a Leatherman, and you generally can't do the work of a fixed blade. I do understand that a law enforcement officer must be presented with a law that is unambiguous to enforce... at least on the municipal level. On the federal level, we know that many law enforcement officers must possess a formal law degree to be able to enforce a law appropriately. It's that complex.
I believe that if we understand the rationale for laws and rules, we may be more apt to follow them out of reason rather than blind faith. And as I'm reading online, and beginning to understand... one of the comments from a British Officer is "we don't have to explain our laws to foreigners". What good does a comment like that do?

-
@Wspeed said:
I don’t fancy going to prison or be on
probation for having a locking knife on me
Unfortunately we have a big problem
with people stabbing each other
And this has ruined it for everyone elseAnd of course you get a nice large fine for carrying as well
I can relate - I don't like the idea of being stopped and searched here in the US because the pocket clip which is visible from afar gives justification for a more thorough and invasive search.
-
Agree the local municipal laws vary. For instance I stopped carrying a MT in the early 2010’s as NYC started strictly enforcing the carry laws. Believe it or not, it’s illegal to carry a knife on MTA (metro NY public transportation) buses and trains. The same system that 6M people ride daily.
-
@Mcfal12 said:
Agree the local municipal laws vary. For instance I stopped carrying a MT in the early 2010’s as NYC started strictly enforcing the carry laws. Believe it or not, it’s illegal to carry a knife on MTA (metro NY public transportation) buses and trains. The same system that 6M people ride daily.Yet you can carry a slipjoint in the city itself.

-
I would of thought that explaining the law to
foreigners would be a thing a police officer should do
Especially if they are thinking of travelling to the UK -
?
How does a wave feel when you're using it as a scalpel? -
Not bad I like the weight of the Wave when cutting

Not sure what it will be like using it for delicate work
-
I have a Swann Morton scalpel holder, I'm sure a multitool will handle different. :o
-
I would think a proper handle will work better

-
I am using these blades that are
more like a knife than a scalpel blade

-
They are excellent blades

-
Got mine today!
Good grief, it took over 2 hours to get it to fit properly in my Charge Tti, lock up, as well as accept a blade. Sooo, if you aren't into modifying things to make them work, don't get one of these. I love doing stuff like that and am very good at it (I've been modifying EDC/non-EDC stuff for over 40 years) but really shouldn't have to spend over 2 hours just to make something brand new work properly.
It works perfectly now.


-
Never seen the blades around here actually
-
I thought it was just my scalpel
holder that had those problems
I am glad to hear that you got it to
work properly in the end srvctec
-
I still havnt ordered mine yet, as I’m deciding on which other bits to get too!

For what you get, it’s well worth it in my opinion. Even if it takes a bit of tinkering to fit, you get a great mod at the end of it.

-
I rather have to do some work on it then getting the
scalpel holder and the fitting and the blade are too loose
-
@RicHT said:
I still havnt ordered mine yet, as I’m deciding on which other bits to get too!
For what you get, it’s well worth it in my opinion. Even if it takes a bit of tinkering to fit, you get a great mod at the end of it.

@Wspeed said:
I rather have to do some work on it then getting the
scalpel holder and the fitting and the blade are too loose
I agree in the end it's worth it. It might also be that at least on the Charge Tti, the scalpel holder is too thick by quite a bit. I had to remove material from each side of the pivot with my belt sander, including the built in "washer" as well as grind at a slight angle to correct it to close properly. Then I had the same issue as Wspeed but worse. I had to remove material from each side of the groves with a .5mm (maybe smaller) diamond bit in my Dremel to get the blade to even go on and even more to get it to seat properly. Once that was all done, I worked on the lock seat and removed about 1mm at just the perfect angle. Then I used my Dremel to deepen the grooves on the thumb stud since it was so darned slippery. The last thing I did was to remove about 2/3 of the raised button that holds the tail of the blade up since it raised it too much, making it seem like the blade might slip off.
Having said all that, it works perfectly now with the stock bronze (or copper?) washer so it opens easily, lock-up is perfect and tight and it closes perfectly.
Now I just need to figure out how to carry an extra blade or two. I think I'll make a Kydex (actually Boltaron) holder and attach it to my sheath.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login