SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
@Max The XAVT is really overkill but also very cool. One day I'll also buy one of those monsters.
-
Thanks Rizio, ulzhan

I think the engineers at Victorinox must have had fun designing it.
-
DAY 28
Got soaked at work more than once today. Was glad to finally get indoors. Had a bit of spare time at the end of the day and used the toothpick to clean around the nose pieces on my glasses and the tiny screwdriver to tighten the hinges a little bit. (Usually this is my tool for pushing in the tiny reset buttons on equipment.)

-
Day 28
Today the Swiss Champ failed me and I had to resort to a purpose built tool.
-
Day 28
Finished the camera strap today. The leather is still a little stiff, but it will get smooth pretty quickly once I use it.
For the next project I think I will make a mounting strap, so I can attach the camera to my backpack. Not sure yet how to do it, might be some trial and error needed




-
Day 28
Uses since the last post - scissors to open a packet of food, awl to open a parcel that contained other food...
You knew it had to happen though
Corkscrew ///
Phillips \
-
-
@SirVicaLot said:
Day 28Finished the camera strap today. The leather is still a little stiff, but it will get smooth pretty quickly once I use it.
For the next project I think I will make a mounting strap, so I can attach the camera to my backpack. Not sure yet how to do it, might be some trial and error needed
Looks Awesome!
That is one handsome camera strap! -
DAY 28 bonus
My emerald scales showed up to replace the ruby ones I tried to put glow paint in on my CT-34. I had just enough paint to do this, and on the emerald plus scales you can only do the shield side as the plus version is solid on the back. Turned out ok. I must have missed a couple tiny spots that look darker, but overall still glows bright for a short while, and then medium for a nice long time. I'm happy with it. Can't wait to start putting this CT to use now!
-
@Simon_Templar said:
Day 28Battery change, awl to the rescue (again)
I am used to seeing many AG15 batteries used for small electronics, and only until recent years, I realized there were just so many variation sizes of button battery that's not even funny.
@Antti Lammi said:
Day 28 of 30Blade was used today to tear plastic, my utility blade was out of blades and last blade snapped while was cutting it. Luckily i had SwissChamp with me so it handeled job easily.

Only Tools Matters
Good use!

@Max Stone said:
Day 28Last model for the last 3 days...What I had to say when I reviewed it for my 30 day challenge last year:
What has 15 layers, weighs 12.6oz (356g) and is 2.5in (65mm) wide? As it’s Day 30, you’ve probably guessed...the Swiss Champ XAVT.
This is the largest 91mm SAK in the current range, adding 4 layers to the already large XLT, and comfortably doubling the width of the Swiss Champ. It’s like you glued two Swiss Champs together!
......
The XAVT is an incredible SAK. Victorinox went out of their way to include not only every current tool in the 91mm range, but to even include tools borrowed from different ranges. Some may see it as a monstrosity, but it’s really a superb technical demonstration of what’s possible from Victorinox. I love it.

Always love reading your reviews on different SAKs, I still remembered your challenge attracted such a large following that was amazing. It's a shame Victorinox did not hire your for their advertising team.

The legendary Eggsecutive.
Eggsecubeater?
:D@CraftsmanSAK said:
DAY 28Got soaked at work more than once today. Was glad to finally get indoors. Had a bit of spare time at the end of the day and used the toothpick to clean around the nose pieces on my glasses and the tiny screwdriver to tighten the hinges a little bit. (Usually this is my tool for pushing in the tiny reset buttons on equipment.)
Reset button pushing is really one of the favorite use of the mini screwdriver too.

-
@Alan K. said:
Day 28
Today the Swiss Champ failed me and I had to resort to a purpose built tool.
That is totally on my bucket list :o , but I have just recently started wet shaving with a safety razor(after decades of electric shaving), still a pretty long way to learn my way to knife shaving.

@SirVicaLot said:
Day 28Finished the camera strap today. The leather is still a little stiff, but it will get smooth pretty quickly once I use it.
For the next project I think I will make a mounting strap, so I can attach the camera to my backpack. Not sure yet how to do it, might be some trial and error needed




Great job! The vibrant red stitching looks sharp on this!

Still can't enlarge it to see... :ahhh
@CraftsmanSAK said:
DAY 28 bonusMy emerald scales showed up to replace the ruby ones I tried to put glow paint in on my CT-34. I had just enough paint to do this, and on the emerald plus scales you can only do the shield side as the plus version is solid on the back. Turned out ok. I must have missed a couple tiny spots that look darker, but overall still glows bright for a short while, and then medium for a nice long time. I'm happy with it. Can't wait to start putting this CT to use now!
Looks good! I think the darker spot may not be your workmanship, sometimes it's possible to get dud particles or larger grain in the paint/mix, and it may look darker or brighter. -
Thank you, CraftsmanSAK and Comis, I had a lot of fun doing this project!

-
@SirVicaLot said:
Day 28Finished the camera strap today. The leather is still a little stiff, but it will get smooth pretty quickly once I use it.
For the next project I think I will make a mounting strap, so I can attach the camera to my backpack. Not sure yet how to do it, might be some trial and error needed
Very nice job. Beautiful strap.
-
@Alan K. said:
Day 28
Today the Swiss Champ failed me and I had to resort to a purpose built tool.
It happens sometimes, but you were brave to try.
@ElevenBlade said:
Day 28Uses since the last post - scissors to open a packet of food, awl to open a parcel that contained other food...
You knew it had to happen though
Corkscrew ///
Phillips \Hope the wine was good
Nice pic and use
@CraftsmanSAK said:
DAY 28 bonusMy emerald scales showed up to replace the ruby ones I tried to put glow paint in on my CT-34. I had just enough paint to do this, and on the emerald plus scales you can only do the shield side as the plus version is solid on the back. Turned out ok. I must have missed a couple tiny spots that look darker, but overall still glows bright for a short while, and then medium for a nice long time. I'm happy with it. Can't wait to start putting this CT to use now!
Very cool job.
-
Day 29
Wenger S54 attended mail duty today, and this challenge surely gone by fast! I remembered having some heated debates with fellow Scouts about whether Wenger was authentic SAK, though it was many decades ago, it sometime felt like it just happened yesterday.

-
SirVicaLot- great strap, that turned out fantastically! Love those emerald GID scales, CraftsmanSAK!

Day 29
Got back from an early morning ride and noticed that the arm on my cycling specs was loose - SC’s mini driver to the rescue! At least it wasn’t raining yet!

-
@Rizio Il Ghiro said:
Sos24 - can’t wait to see the finished product from your new jig - blue and green, my favourite colour combo! -
@Rizio Il Ghiro said:
SirVicaLot- great strap, that turned out fantastically! Love those emerald GID scales, CraftsmanSAK!

Day 29
Got back from an early morning ride and noticed that the arm on my cycling specs was loose - SC’s mini driver to the rescue! At least it wasn’t raining yet!
Good use!
Wow, you finished this so lightning quick:

-
-
DAY 29
Some nice Rangers


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
