Show us your leatherwork
-
Wet forming is pretty easy, just give it a try. Makes it much easier to form the leather to your liking and prevents cracking.
When forming the leather using your fingers, make sure you keep your fingernails away from it. They can make some pretty nasty dents in wet leather. Guess how I know
:D -
You are so ready for wet forming. As with any leather working skills, practice and have fun.
-
I am currently jumping into the whole 3D printer thing...but looking at this thread, I though I would post photos of my sweet Leather working station. I have it set up to help my workflow. I think you can zoom into the photos and get a good close look at the various tools and stamps. I know I am always curious to see other people's workstations.
The whole Mastercraft workbench bought a few years ago from Canadian Tire. I store my leather upstairs, and still have a few items up there that I haven't moved downstairs as of yet. Above I store all of my chemicals. they all just fit.
<a href="https://flic.kr/p/2iRYZ1o" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792383946_337bf224cb_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8349A by Chako, on Flickr
I did not take photos of this area, but underneath are a series of small parts bins where I store all the small pieces including belt buckles, needles, waxed thread, etc...
I had a good friend make me a huge tool holder which I needed badly. Now everything is at hand. On the far left, I store various wood carving chisels, clay tools, screwdrivers, and hole punches. Then the various metal stamps start.
<a href="https://flic.kr/p/2iS1EjC" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792711312_b217307d89_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8361A by Chako, on Flickr
The middle part of my stamping organizer...more leather stamps. It is amazing how you can accrue different stamps. With that said, you can do a lot with a basic set of 12 stamps. After a while, getting more just expands your capabilities.
<a href="https://flic.kr/p/2iS1yb5" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792690632_ea9d352599_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8362A by Chako, on Flickr
On the right of the stamping organizer, I keep my swivel knives, modelers, an assortment of needles, and some X-Acto knives.
<a href="https://flic.kr/p/2iRWgYu" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49791855688_d8ba9c7f0e_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8363A by Chako, on Flickr
All you really need is one swivel knife...but to make life easier, it is best with an assortment with different blades. It is a pit of a pain in the butt to exchange the blades during a project. The ceramic blades are my favourites. The edger on the right I use to make nice straight edging lines on projects.
<a href="https://flic.kr/p/2iRZ6d8" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792404811_2bf3dd9c81_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8360A by Chako, on Flickr
There are 2 drawers under the table. On the left, I keep an assortment of tools stored here.
<a href="https://flic.kr/p/2iRWb3m" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49791835728_5ce0d85504_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8353A by Chako, on Flickr
The right side drawer holds all of my boxed sets. These boxed sets can include stamping dies, tools, etc...
<a href="https://flic.kr/p/2iS1Eni" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792711467_1f9b43cfba_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8355A by Chako, on Flickr
I just grabbed a few top ones to show you some of the items inside. Here is a set of various stamps, and the next is a leather punch.
<a href="https://flic.kr/p/2iRZ67b" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792404466_04b7dc1d91_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8356A by Chako, on Flickr
<a href="https://flic.kr/p/2iS1Ecd" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792710882_3b34da01f4_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8358A by Chako, on Flickr
On the back plate, I have most of my hand tools. I tried to set the whole workstation up to ease workflow, or at least my workflow.
<a href="https://flic.kr/p/2iS1ZH7" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49792776532_1af35bea34_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8364A by Chako, on Flickr
the central part, the all important hammers. I have my mauls stored on the left of the table next to my stamp organizer.
<a href="https://flic.kr/p/2iRWb9o" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49791836078_c81b375a2f_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8365A by Chako, on Flickr
On the right side, most of my slicing, dicing, scoring, and cutting tools.
<a href="https://flic.kr/p/2iRWgXc" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49791855613_9821584d4a_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8366A by Chako, on Flickr
One thing that I must say, I bought myself a very nice set of 3 under-hanging lights but these never did stay put as the glue on the various Velcro taps gave out due to weight and gravity. Then I stumbled upon these little lights with magnets. Rotate the central button for variable light power. I bought 6 of them and it works great. No more accidents.
-
Very nice Chako. I recall seeing your work as well which was very nice. Have you made anything recently?
-
Awesome tools! 
All my tools fit in a small box so far, but the collection is growing :D
-
Nice workstation!
[It's not failure if you learn something from it]
-
@SirVicaLot said:
Awesome tools! 
All my tools fit in a small box so far, but the collection is growing :D
+1
This is addictive!
:D :D :D :D
-
I was looking at your tools, and these caught my attention. What are they used for? Punching a group of 3x3 holes for stitching loops or handles?


-
Not in a while Aloha. I keep wanting to make a holster and belt for 2 single action army revolvers, but never seem to get enough time to do it.
pfrsantos, right on the money. The one on the left is called a 4 in 1 leather punch used for quickly adding holes for lacing or sewing. Great for wallets or anything you need to punch holes in quickly. The larger unit on the left is used mostly for purses, bags, straps. I guess whatever you can come up with. The individual punches are removable...so you can easily configure the tool to only punch certain holes in a project. Used for decorative, sewing, lacing, etc.
-
First ever wallet, or at least a prototype. It has a coin pocket on the other side. I'd show the other side but the coin pouch edge stitching didn't go so well there ::) To be honest this leather is simply too thick at 2mm. I've ordered some red crazy horse leather with 1.2mm thickness for version two which will allow me to stitch closer to the edge and have a neater and smaller overall package.

-
Really wasn't happy with the above prototype, here's another I made today with a far more suitable leather. Much happier with it.


-
Nice work!

-
I see you inverted the stitching in the front from bottom+left to bottom+right. Any particular reason for that?

I don't understand how the back stitching works as a coin purse. Could you please explain? Thanks.

-
I love the look of those very slim minimal wallets. I think your leather work is very well done.

-
@pfrsantos said:
I see you inverted the stitching in the front from bottom+left to bottom+right. Any particular reason for that?

I don't understand how the back stitching works as a coin purse. Could you please explain? Thanks.

Yeah, I forgot which way I did it last time.

The back slit is a coin purse, it opens to a little pouch where the coins go. The stitching holds a little flap which stops the coins from falling out. Hopefully this shows it better :D

-
Looks good!
[It's not failure if you learn something from it]
-
Nice work !

-
Thanks folks.
-
@pomsbz said:
Yeah, I forgot which way I did it last time.
The back slit is a coin purse, it opens to a little pouch where the coins go. The stitching holds a little flap which stops the coins from falling out. Hopefully this shows it better :D

Yeah, it makes more sense, now. I still have some questions about the coin flap.

I made a sketch of the wallet construction. I can send it to you, if you don't want the design to be public. Awlso, if you prefer to keep the design to yourself, I'll just let it be and say it's a very good concept.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login