3D Printer Blog
-
Fingers crossed. :D
-
I just checked for a hundred times and finally got a message that the package arrived at my city at 8:15 PM. Maybe I will get it tomorrow. Ordered the printer back in April 18th for something to learn and play with during COVID 19. Almost a whole month in transit! It feels like 2 months!

-
@Chako said:
I just checked for a hundred times and finally got a message that the package arrived at my city at 8:15 PM. Maybe I will get it tomorrow. Ordered the printer back in April 18th for something to learn and play with during COVID 19. Almost a whole month in transit! It feels like 2 months!
I know I've ordered some parts and stuff earlier. By now it has been so long that I don't even remember what.

-
I know how that feels. I just woke up and the first thing I looked at was to see if the package got anymore handling. Can't wait to get that "out for delivery" message.
-
The package has finally arrived.
<a href="https://flic.kr/p/2j1JgpP" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49891360913_778815c0ae_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8399A by Chako, on Flickr
Inside are the upgraded colour touchscreen LCD (Got to wait for the main board to arrive), The auto leveler BLTouch kit. 1 roll of red PLA, and 1 roll of white PETG. And the printer itself, the Ender 3.
<a href="https://flic.kr/p/2j1LU8c" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49891874641_5ef59e4535_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8401A by Chako, on Flickr
The 1Kg rolls are indeed larger then I thought they would be.These Overture filaments come with a neat little ruler, a glue on 20x20 cm base, and the filament in a resealable plastic bag. The base is a nice addition that I will probably not use. I noticed they sell these for 10 bucks on amazon...and you get one free with the purchase of a filament roll. Not bad.
<a href="https://flic.kr/p/2j1Nv93" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49892187542_088a60a652_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8402A by Chako, on Flickr
<a href="https://flic.kr/p/2j1Nv7K" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49892187467_06716fdb04_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8403A by Chako, on Flickr
<a href="https://flic.kr/p/2j1LU3c" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49891874351_251c4e5ffe_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8405A by Chako, on Flickr
I was going to leave it at that, but then I started to look on the exterior of the Creality Ender 3 box and didn't see any reference to it being a 3X. So, I had to take everything out to see what is what. I am happy to note the presence of a glass build plate...so yes, this is indeed the 3X variant of the Ender 3. I looked long and hard for any instructions only to find it sandwiched between the base and glass plate.I was going to do this tomorrow, but at least all the parts are laid out for tomorrows build.
<a href="https://flic.kr/p/2j1Nv3X" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49892187247_e90967c8e5_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8413A by Chako, on Flickr
-
That should keep you busy for a while.

-
I had a good nights sleep...but it took me a little time to fall asleep as I was super pumped to get the Ender 3 built in the morning. I took my time and took about 2 hours or so to do the build I didn't bother loooking at the included sheet of instructions as I found this awesome online guide by 3D Printing Canada. I placed that on my tablet and watched/paused my way through the build. There was only 1 mistake, the wrong screws to attach the Z-Axis stepper motor...but a quick look at the include instructions directed me to the proper screws. Yeah, the ones mentioned in this guide do not fit the part. Other than that, it was a real relaxing build.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Installing the side extruded aluminium side arms and power supply.
<a href="https://flic.kr/p/2j1WC3D" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49893771673_6b704c1415_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8414A by Chako, on Flickr
Installing the Z-Axis micro switch.
<a href="https://flic.kr/p/2j21Qt1" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49894593902_52cc385451_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8416A by Chako, on Flickr
Next photos deal with the top gantry along with the extruder and feeder mechanism.
<a href="https://flic.kr/p/2j1WBZn" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49893771483_175369bb51_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8418A by Chako, on Flickr
<a href="https://flic.kr/p/2j21QqA" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49894593762_4622528b0e_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8419A by Chako, on Flickr
And here the printer mostly done, including attaching top gantry support.
<a href="https://flic.kr/p/2j1WBWS" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49893771338_437d3ea4eb_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8420A by Chako, on Flickr
Lastly, the filament support arm.
<a href="https://flic.kr/p/2j1ZfLT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49894285451_b25019b867_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8422A by Chako, on Flickr
Next thing to do is to connect all the wires, do a little cable management, and then plug the printer into the mains.
<a href="https://flic.kr/p/2j1WBTW" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49893771168_58a2bbe069_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8424A by Chako, on Flickr
It is alive!
<a href="https://flic.kr/p/2j21Qmn" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49894593517_927b15622d_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8425A by Chako, on Flickr
Next step is to heat the nozzle, the bed, and then to do your bed leveling. I made a mistake here as well...but it was one I hadn't come across all of my readings. My copy is a newer model that comes with a removable print plate. It also came with the glass build plate. I erred in stacking both plates on top of the build bed. This caused me issues with the included clips until I realized you use either or, and not both at the same time. I removed the one and kept the glass plate...no more clearance issues. I then had to level each corner of the bed using a sheet of paper. This took some time, and I managed to slightly score the glass plate transitioning from my rear corner points. There is a bit of a finesse in adjusting the 4 corners. I can now see that.
Once all of that is done, plug in the micro SD card and select one of the files to test print. I think I selected a dog for the first trial test. Printing that out right now.
<a href="https://flic.kr/p/2j1ZfHr" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49894285251_1fcbc07ea1_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8428A by Chako, on Flickr
Going to wait to see what I get and will post the results in here once it is done. I am going to run the printer stock for a while. I am still waiting for the replacement motherboard and a few more upgrades. I also bought a official creality metal extruder upgrade kit once I saw mine is all plastic, along with a few more nozzles and a nozzle cleaning kit. The Ender 3 came with one acupuncture needle in 0.4 size...which looks very fragile. More might be needed down the road.
-
I am in utter fascination. I didn't think this would impact me as much. All I can say right now is this is freaking amazing.
<a href="https://flic.kr/p/2j1ZETa" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49894366551_7a3517b854_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8432A by Chako, on Flickr
<a href="https://flic.kr/p/2j1ZEU7" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49894366606_85001610a4_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8431A by Chako, on Flickr
-
I also late last night, bought another Creality 3D printer, the Creality CR-100 which is their cheapest and most kid oriented printer going. I have an eye of maybe including one in my classroom in the future. Besides, this thing is Optimus Prime cute. Only does 10cm x 10cm x 8cm builds, but it was cheap, and weird...and I can dig weird
Creality CR-100 3D Printer: Review the Specs
We take a look at the specs of the Creality CR-100. Read on as we fill you in on everything we know about this kid-friendly printer's features.
All3DP (all3dp.com)
-
My Ender 3 came flat as can be. I have heard that the older ones were not flat at the base and thus the printer rocked a little in use, necessitating a small ship to make it solid. My copy was sure footed and plumb. I also noted that on the newer Ender 3s, there are two base adjustment screws on each leg to make it flat if needed. I guess the older ones didn't have this adjustment.
I find the Ender 3 smaller than I thought it would be. I have plenty of work room on my leather workstation to work with. I was a bit uncertain, never really seeing one in real life. Photos tend to make things look bigger than they actually are.
-
Printing stuff becomes very addicting!! lol
-
I can see that. :ahhh
-
Is the dog printed yet? :D
-

Sent fra min FRD-L09 via Tapatalk
-
78% thus far. I have to go out once its done to get some groceries. I do not want to leave it alone.
-
The first print took almost 3 hours to do...and I am taken aback at the quality of the little dog. I am very happy with the final results.

<a href="https://flic.kr/p/2j24ND3" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49895173092_6adbc1f7e1_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8441A by Chako, on Flickr
Next step is to examine all the files that came on the micro SD card, take a closer look at CURA, and to try my chops off of something from Thingiverse. I can see a few upgraded parts I will need to do for the Ender 3 now that I have it physically in front of me.
-
Beware of the 3D printer hyponotizing effects :D
-
My next print is a fan bracket made for the Thermaltake P3 Case. The one thing I did not like about this case is that there is no direct air over the mosfets on the motherboard. This bracket will allow me to install a 120 or 140 mm fan to blow directly on the motherboard, It fits on the front tempered glass panel. Not sure if this will be to scale...but this is my first time slicing something using CURA.

<a href="https://flic.kr/p/2j25sXy" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49895301998_3e2673f814_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8443A by Chako, on Flickr
Vidar, I am thinking of maybe buying a Delta down the road to just stare at it will it does its thing. Yeah...

May I add that the tempered glass bed on this printer is sheer brilliance. My first print came off without a hitch after letting the bed cool down. i didn't even have to use a spatula. I also noticed that the base of the dog or raft was meant to come off. It did that rather nicely just now. When I did that, there was a hidden M written on the bottom of the model. Kinda like an Easter egg.
My next printer projects will be to improve the printer. I can see a filament arm to keep the angle nice, a fan cover for the main board area to prevent plastic from entering the fan hole, and a small plastic part to prevent the filament from rubbing against the Z axis screw. I should have 2 rolls of black PLA arriving this Friday. That was for the Ender 3 upgrade parts.
-
@Chako said:
Vidar, I am thinking of maybe buying a Delta down the road to just stare at it will it does its thing. Yeah...
That is surely reason / excuse enough to get a Delta?!

I got a little VMC and that is quite hypnotic too. I guess there is something to be said for sitting around and watching machines work. (I think the word that covers it is "unproductive"... ::) Still, it is so hard to look away. )
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
