The Comprehensive Knife Based Multitool Thread
-
@ElevenBlade said:
The closest thing available currently is the Rangergrip 74 or something in that line.Right. But the ranger grip is retractable, small light duty pliers that barely open at all. The Swiss grip has big heavy duty fixed pliers that are very robust and strong. Completely different uses.
Charles.
-
@ChopperCharles said:
Right. But the ranger grip is retractable, small light duty pliers that barely open at all. The Swiss grip has big heavy duty fixed pliers that are very robust and strong. Completely different uses.Charles.
Oh. Nice. I didn't know that the Swiss Grip was fixed
-
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Bit on a different budget :o
but the Extrema Ratio Police Evo should qualify too...
-
Shouldn’t they have pliers to count in this thread? Otherwise they’re just pocket knives...
Charles.
-
I don't think you necessary need to have pliers to be considered a multitool.
-
@ChopperCharles said:
Shouldn’t they have pliers to count in this thread? Otherwise they’re just pocket knives...Charles.

Good question - I would say not necessarily. Certainly, the pliers can not be the sine qua non of the classification. Otherwise, a Vic Deluxe Tinker would qualify.
I think that it needs to be a multitool of some sort, and the knife blade needs to be substantial, and the center of attention... what the tool is based around
That requires that both of these attributes are defined further.
What qualifies as a multitool can include a SAK or even an old electrician's knife with a screwdriver and a main blade. Then, of course, there are the plier-centric tools.
Next, we'd need to define what qualifies the tool as being based around the knife blade, rather than the blade being an equal participant in the tool (like a 91mm SAK)
- when there's a plier on the tool, it would mean that the handle of the tool is unmistakably the knife handle, and certainly not a butterfly opening plier handle
- The knife blade must take up the full length of the tool, and be substantial enough to be considered a folder if standing alone. (one wouldn't describe it as a slipjoint or somesuch)
- A locking mechanism might be a relative qualification... though there are some folders that are nonlocking
So, therefore, there are some criteria that would need to be met to qualify something as a knife-based MT. Maybe a certain number of established criteria are needed, as there is some variation
- it is a multi-tool - it contains more than one tool
- the handle of the tool is the knife handle,
- the blade, if taken alone, would be considered a folder rather than a slipjoint, or pen knife
- locking blade
- full-length blade
Let's take some examples and see how they play out.
As stated previously, the pliers themselves can't be the main differentiation - otherwise, the Deluxe Tinker would qualify.
- The Gerber Centerdrive has a blade that meets several of the criteria, however, the handle being designed for the pliers disqualifies it.
- The Victorinox One Hand Trekker, would qualify as the handle is molded for the knife, and indeed is backward for the screwdriver. Also, the blade locks and can be purchased as a folder in the form of the Sentinel. The same goes for the Rangergrip series.
- Any medium-sized SAK is disqualified as there are several full-length tools of equal stature, even though some Evogrip models have locking blades.
- the Leatherman P4 would qualify on all counts, and be considered a multitool on the face of it, rather than a pocketknife.
Those are my thoughts, and of course, I am interested to hear everyone else's ideas.
You see.... once there are objective criteria, things become less a matter of opinion.
For example. When we know that a fruit is defined by the flowering part of the plant, we must then agree that a Bell Pepper (or Capsicum) is a fruit, although we usually eat it like a vegetable.
-
There is a knife from LAND aka Sanrenmu, a few of them actually which could be included as well.

-
How about the Gerber Armbar? While it’s knife based, the focus seems to be the screwdrivers.

-
@charlie fox said:
How about the Gerber Armbar? While it’s knife based, the focus seems to be the screwdrivers.The Armbar certainly qualifies as knife based, in my estimation.
One of these days I plan to get the Armbar Cork.which has a similar toolset compared to the Vic Compact, but the blade is one-hand opening, and locking... therefore, I would certainly call this a knife-based MT in a way that the Vic Compact isn't... but enough about taxonomy.
They adapted their own Centerdrive bit-driver, it seems. Not a bad decision since it's something they do well. However, I'm reading that their scissors aren't that great - which is unfortunate since they're Fiskars scissors, technically speaking.
Most people seem to be underwhelmed with the Armbar Drive, since the awl and the other implements don't have a good detent in the open position.
With the Cork, it's less important that the tools stay open, so I'm not that worried that I'll have an issue in this regard

What are your thoughts CF? Is the knife blade reasonable as an EDC?
-
The Armbar Cork just seems like another pocket knife. A slightly beefier swiss army knife. I'd still say knife, not multitool.
the Armbar drive is a failure because the bitdriver doesn't lock (nor does anything else except the blade). That's the most important tool on the knife, and without a lock it's completely useless.
Charles.
-
Leatherman Crater C33T/C33Tx were always a favorite of mine in this category..
-
@ToolJoe said:
Leatherman Crater C33T/C33Tx were always a favorite of mine in this category..I always liked the Crater - more than the Free series - since it looks to be more pocketable. I'd have gotten one if it had the LM opener that's on the MTs rather than the carabiner/opener that's on it. Maybe I'm being silly but I have not-infrequently been at a cookout, a camping trip, or even a pot-luck where nobody had a can opener but me.
But times and needs change - so maybe it's time to get one

-
How's the Roxon as an EDC?
-
Found this beauty today... not a knife-based, but instead a razor-knife basis. I really, really like this design, and I wish it was available here. It's not on Amazon.co.uk, so I can't order it easily :/
Link: https://www.ffx.co.uk/tools/product/Stanley-0-71-024-3253560710248-Fatmax-Utility-Knife-Multi-Tool
Pic:

-
@Sea Monster said:
It's well known that a Vic Outrider is the only knife based multitool anyone ever need,Nope. The outrider is not OH and any 111mm Vickie with more than three layers becomes too thick to handle, defeating the point of the ergonomics of 111mm.
A better option? Get yourself a forester, a paracord lanyard and attach a Leathy Style PS to it. This setup is still pretty light for EDC and you get to carry paracord, pliers and a better set of scissors . If u need Phillips screwdriver then substitute the forester for a soldier 08.
This imho is closer to the"knife based multi tool setup that you'll ever need"
-
@EtherealityX1 said:
Nope. The outrider is not OH and any 111mm Vickie with more than three layers becomes too thick to handle, defeating the point of the ergonomics of 111mm.A better option? Get yourself a forester, a paracord lanyard and attach a Leathy Style PS to it. This setup is still pretty light for EDC and you get to carry paracord, pliers and a better set of scissors . If u need Phillips screwdriver then substitute the forester for a soldier 08.
This imho is closer to the"knife based multi tool setup that you'll ever need"
I'm partial to the Hercules over the Outrider myself because, when you're getting that chunky, might as well go for broke. That said, if you look at reviews, many of which are on YouTube, the Outrider is up there in popularity, Maybe that's a limit some people have for size.
Interesting idea with attaching a Style PS via paracord though. I like the concept, but more for the small blade than the pliers. I might attach a Micra or Style CS, or even a Vic Classic
I went with the OHT instead of the Forrester because I could only find a OHO blade on the Trekker. I generally prefer the corkscrew over the Phillips - especially in the woods to untie knots. So that purchase was after some intense searching (only finding one that was shipping from Russia)
I also have a OHO Nomad (think Spartan toolset in 111mm) that I'm happy with, and this pairs nicely with a LM Micra. That would accompany me on a cookout or something where I was doing food prep and light-duty assembly.
In general though I am resigned to the idea that a knife based multitool should have the tradeoff of a better knife for fewer accessories in order to maintain ergonomics.
-
I don't mind an extra chunky multitool, so long as it's got the tools I need. My plan is a WorkChamp and scales for a Sentinel, to get the pocket clip. That'd be the perfect camping knife.
Charles.
-
@ChopperCharles said:
I don't mind an extra chunky multitool, so long as it's got the tools I need. My plan is a WorkChamp and scales for a Sentinel, to get the pocket clip. That'd be the perfect camping knife.Charles.
I'm surprised more people don't swap out the scales for the pocket clip. Personally, I only use a suspension clip. But it seems like most people prefer pocket clips.
-
What’s a suspension clip?
The reason I bought a Ruike rescue knife over the victorinox was the pocket clip and carabiner...
Charles.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

