The Comprehensive Knife Based Multitool Thread
-
The Armbar Cork just seems like another pocket knife. A slightly beefier swiss army knife. I'd still say knife, not multitool.
the Armbar drive is a failure because the bitdriver doesn't lock (nor does anything else except the blade). That's the most important tool on the knife, and without a lock it's completely useless.
Charles.
-
Leatherman Crater C33T/C33Tx were always a favorite of mine in this category..
-
@ToolJoe said:
Leatherman Crater C33T/C33Tx were always a favorite of mine in this category..I always liked the Crater - more than the Free series - since it looks to be more pocketable. I'd have gotten one if it had the LM opener that's on the MTs rather than the carabiner/opener that's on it. Maybe I'm being silly but I have not-infrequently been at a cookout, a camping trip, or even a pot-luck where nobody had a can opener but me.
But times and needs change - so maybe it's time to get one

-
How's the Roxon as an EDC?
-
Found this beauty today... not a knife-based, but instead a razor-knife basis. I really, really like this design, and I wish it was available here. It's not on Amazon.co.uk, so I can't order it easily :/
Link: https://www.ffx.co.uk/tools/product/Stanley-0-71-024-3253560710248-Fatmax-Utility-Knife-Multi-Tool
Pic:

-
@Sea Monster said:
It's well known that a Vic Outrider is the only knife based multitool anyone ever need,Nope. The outrider is not OH and any 111mm Vickie with more than three layers becomes too thick to handle, defeating the point of the ergonomics of 111mm.
A better option? Get yourself a forester, a paracord lanyard and attach a Leathy Style PS to it. This setup is still pretty light for EDC and you get to carry paracord, pliers and a better set of scissors . If u need Phillips screwdriver then substitute the forester for a soldier 08.
This imho is closer to the"knife based multi tool setup that you'll ever need"
-
@EtherealityX1 said:
Nope. The outrider is not OH and any 111mm Vickie with more than three layers becomes too thick to handle, defeating the point of the ergonomics of 111mm.A better option? Get yourself a forester, a paracord lanyard and attach a Leathy Style PS to it. This setup is still pretty light for EDC and you get to carry paracord, pliers and a better set of scissors . If u need Phillips screwdriver then substitute the forester for a soldier 08.
This imho is closer to the"knife based multi tool setup that you'll ever need"
I'm partial to the Hercules over the Outrider myself because, when you're getting that chunky, might as well go for broke. That said, if you look at reviews, many of which are on YouTube, the Outrider is up there in popularity, Maybe that's a limit some people have for size.
Interesting idea with attaching a Style PS via paracord though. I like the concept, but more for the small blade than the pliers. I might attach a Micra or Style CS, or even a Vic Classic
I went with the OHT instead of the Forrester because I could only find a OHO blade on the Trekker. I generally prefer the corkscrew over the Phillips - especially in the woods to untie knots. So that purchase was after some intense searching (only finding one that was shipping from Russia)
I also have a OHO Nomad (think Spartan toolset in 111mm) that I'm happy with, and this pairs nicely with a LM Micra. That would accompany me on a cookout or something where I was doing food prep and light-duty assembly.
In general though I am resigned to the idea that a knife based multitool should have the tradeoff of a better knife for fewer accessories in order to maintain ergonomics.
-
I don't mind an extra chunky multitool, so long as it's got the tools I need. My plan is a WorkChamp and scales for a Sentinel, to get the pocket clip. That'd be the perfect camping knife.
Charles.
-
@ChopperCharles said:
I don't mind an extra chunky multitool, so long as it's got the tools I need. My plan is a WorkChamp and scales for a Sentinel, to get the pocket clip. That'd be the perfect camping knife.Charles.
I'm surprised more people don't swap out the scales for the pocket clip. Personally, I only use a suspension clip. But it seems like most people prefer pocket clips.
-
What’s a suspension clip?
The reason I bought a Ruike rescue knife over the victorinox was the pocket clip and carabiner...
Charles.
-
@ChopperCharles said:
What’s a suspension clip?The reason I bought a Ruike rescue knife over the victorinox was the pocket clip and carabiner...
Charles.
The clip hanging off the Alox Pioneer X is a suspension clip.
Instead of the handle of the knife staying clipped up against the inside of your pocket, regardless of how you stand or sit down..... a suspension clip does the job of keeping the knife easily at hand. Meanwhile, it lets the rest of the knife go where it wants in the path of least resistance within your pocket. You don't feel it (if you position the clip in the right place on your pocket).
You can attach this suspension clip to any Victorinox with a keyring. Mine is a generic P7 clip. Victorinox makes their own as well, but that clips on your belt and dangles all the way down to your pocket (if I understand it right).

-
@ChopperCharles said:
I don't mind an extra chunky multitool, so long as it's got the tools I need. My plan is a WorkChamp and scales for a Sentinel, to get the pocket clip. That'd be the perfect camping knife.Charles.
IMHO If you are willing to deal with the bulkiness and poor ergonomics of something like the Workchamp, I think you're better off carrying a Swisstool or a Surge. Charge if the Surge is too heavy for you. Swisstool is a meager 40 g more than a workchamp's weight. Either of these do more than the workchamp, they do it better and with better ergonomics. You can even put carry on clips on them too if you wish.
Look I am a Victorinox fan, I really am. But that doesn't mean that I wont recognize whenever they've designed something that is pointless . The workchamp, hercules and the workchamp xl ( same goes for the 130 mm one with pliers and such) are difficult to justify when you compare them with other Leathie and even Vicky plier-based multitools. Yes i know that this thread is about KNIFE based multitools, not PLIER based one. But still, the hercules, workchamps and the plier ranger grips (such as the boatsman and 174) are examples of tools that were designed as "knife-based" but by cramming too much into them, they rendered them as a worse proposition than a plier based multitool. I still think that if you do not want to carry a plier based multitool and must carry a knife based one, then do so but get a knife based one that is not too unwieldy and complement it with a smaller SAK or something like the Style PS or the likes that has whatever your knife based multitool doesnt have.
Just my two cents.
-
@EtherealityX1 said:
IMHO If you are willing to deal with the bulkiness and poor ergonomics of something like the Workchamp, I think you're better off carrying a Swisstool or a Surge. Charge if the Surge is too heavy for you. Swisstool is a meager 40 g more than a workchamp's weight. Either of these do more than the workchamp, they do it better and with better ergonomics. You can even put carry on clips on them too if you wish.Look I am a Victorinox fan, I really am. But that doesn't mean that I wont recognize whenever they've designed something that is pointless . The workchamp, hercules and the workchamp xl ( same goes for the 130 mm one with pliers and such) are difficult to justify when you compare them with other Leathie and even Vicky plier-based multitools. Yes i know that this thread is about KNIFE based multitools, not PLIER based one. But still, the hercules, workchamps and the plier ranger grips (such as the boatsman and 174) are examples of tools that were designed as "knife-based" but by cramming too much into them, they rendered them as a worse proposition than a plier based multitool. I still think that if you do not want to carry a plier based multitool and must carry a knife based one, then do so but get a knife based one that is not too unwieldy and complement it with a smaller SAK or something like the Style PS or the likes that has whatever your knife based multitool doesnt have.
Just my two cents.
Totally get that - and this idea has stopped me from getting the Rangergrip 74, which on the face of it covers all your bases..... nice big knife, openers and drivers and full-sized pliers. If you need more plier and you don't mind the belt sheath, they're a good way to go if you're a diehard Vic fan. For my purposes these days the most I need pliers for is to tighten bits and pieces on camping gear and the little ones on a Vic Hercules are good enough for that.
You're also pointing out the major advantage of going with a KBMT - the handle has to be comfortable as a knife handle. So the Workchamp and probably even the Hercules or Outrider lose that advantage. But again, personal preference varies. Alexanderre (MTo member) had been a LM guy for a long while and recently has switched over to a Workchamp and seems to be happy as a clam. Personally, I don't think I want to use any 111mm Vic that's more than 3 layers. I get the sense for most large hands the Outrider is narrow enough to be comfortable (based on YT reviews). The same goes for a Pliers based tool - where the advantage can be lost by the ergonomics - (I'm looking at you LM Supertool OG)
So - yep I'd have to agree with you that something as big as a Workchamp could be off the mark when it comes to being useful and "knife based", so it may be better to go with a plier's based tool at that point. That's even more evident with a Vic Boatsman or Rangergrip 74. Unless you just want the form factor of a knife above all (which is an assumption in the topic of the thread). This is where something like a lesser-known brand like Pohaku may have an advantage, where the handle ergonomics favor the knife even though there are medium-sized pliers included. Or in many/most cases, you'll forgo the pliers entirely and go for something like a Leatherman K4x.
-

the UP Knife is a crazy looking and functioning tool..but dear god is it made well. This is a picture of mine.
-
Sanrenmu 7094 LTX-PIH-T4

-
@ReamerPunch said:
Sanrenmu 7094 LTX-PIH-T4


This looks sturdy. The phillips on the guf hook is a nice touch.. I'm sure it will work in a pinch, though it won't help much for recessed screws. -
The Phillips works but it folds if you press too hard.
-
@ReamerPunch said:
The Phillips works but it folds if you press too hard.thats scary. Have you seen the land knife?? Land 9047


-
The Land knife I’ve handled was surprisingly well done. The liner locks were good and the steel seemed okay.
Sent from my iPhone using Tapatalk
-
Every few months I see this somewhere and think about getting it. It has a nice toolset, and is well made.
The thing is, it seems a little too big. I already have a Ruike LD51 and many 111mm SAKs, with far more tools than this, at about the same size. Plus, the Rebar is about the same size and weight, and has far more utility than this. So I never bother ordering it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
