MTO Unleashed!
-
Powernoodle Day 11
*
ThePeacent kindly gifted this original Cold Steel Vaquero to me a few years ago. I love the old school Cold Steel models.* -
@powernoodle said:
Powernoodle Day 11ThePeacent kindly gifted this original Cold Steel Vaquero to me a few years ago. I love the old school Cold Steel models.[/i]
I bet you enjoy Sharpening that :D
-
Nice knives and pics everyone!
Day 11
When filling watering cans on Monday, I noticed that the outside tap handle had worked loose, then promptly forgot about it! We’ve had rain since then, so I haven’t had cause to look at it since then, but whilst checking window seals just now, I remembered it needed tightening up, so SwissTool Spirit in hand, I used the in-line Philips to tighten the screw up. This is the shiny silver one I was “encouraged” to get during the March Madness challenge intending it to be my take to work SwissTool Spirit, but then lockdown, so it only gets an occasional outing on my belt.


-
If Stormtroopers were issued knives

This arrived a short while ago , I’ve wanted one for ages and then found out Copper &Clad ship to the UK.
S30v blade , black and white Cerakote.
5E173872-A124-4F8E-9008-ABFD3F4D1946 by Duncan Moore, on Flickr
84066EE6-DEBF-43A9-B381-78E96EDEBFC0 by Duncan Moore, on Flickr
Day 11.
Remington P1907 Bayonet, for the SMLE 303 rifle. September 1915.

-
I have a sweet spirit, and find joy in the mundane.
Actually, its not that fun. Gotta use rat tail file to get in between the serrations. At least that's how I do it. Fortunately, a serrated knife stays "sharp" longer than a plain edge. I don't think its really possible to sharpen those micro serrations.
-
Day 11 brings a couple of special knives.
The first is a Black box Winchester Texas Toothpick in old Rodgers bone . This was kindly given to me by my friend Robert (SAK Guy)
The second is my birth year 1967 Wenger soldiers knife very generously gifted to me by Barry Rowland

-
If Stormtroopers were issued knives

This arrived a short while ago , I’ve wanted one for ages and then found out Copper &Clad ship to the UK.
S30v blade , black and white Cerakote.
5E173872-A124-4F8E-9008-ABFD3F4D1946 by Duncan Moore, on Flickr
84066EE6-DEBF-43A9-B381-78E96EDEBFC0 by Duncan Moore, on FlickrThis BUCK looks sharp!
Day 11.
Remington P1907 Bayonet, for the SMLE 303 rifle. September 1915.People used to say knife with gun maker name usually don't have very high quality, I bet it's a different story back in those days.
@SteveC said:
Day 11 brings a couple of special knives.The first is a Black box Winchester Texas Toothpick in old Rodgers bone . This was kindly given to me by my friend Robert (SAK Guy)
The second is my birth year 1967 Wenger soldiers knife very generously gifted to me by Barry Rowland

Both are meaningful carry, very nice! I wonder how's Robert doing? Haven't seen him around for a while.
-
**Day 11: **This is a collection of folders that I inherited from my father in-law.
On the left are three Schrade stockman knives.
On the right, top to bottom: Clauss floral, a Camillus electrician, and a Case trapper..jpeg)
-
-
-
@ChopperCharles said:
Day 6: SOG SwitchplierSpoiler:
Here is the SOG Switchplier that I bought yesterday, and immediately broke 20 minutes later. Cutting 12ga copper wire. House wiring. The stuff that normal multitools make short work of.... killed this SOG.In the first pic, you can see that the switchplier is jammed closed. It is spring-loaded, it should not be sticking.
The second pic shows the problem, but it's hard to see. The pin is not long enough, and has popped out of the handle on the left side, stretching the frame apart. The plier head is slightly canted to the right.
The third pic shows the galling damage to the handle. This damage, plus damage to the pin itself, means the pin now pops out even under light pressure. D'oh.
Finally, here's a video that shows the problem in action:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Charles.
Has this issue been ignored all these years? :think:
I would not mind trying out a $30 PowerPlay or something, but the Switchplier no, just no. -
If Stormtroopers were issued knives

Spoiler:
This arrived a short while ago , I’ve wanted one for ages and then found out Copper &Clad ship to the UK.
S30v blade , black and white Cerakote.
5E173872-A124-4F8E-9008-ABFD3F4D1946 by Duncan Moore, on Flickr
84066EE6-DEBF-43A9-B381-78E96EDEBFC0 by Duncan Moore, on FlickrRare trifecta, I like the blade design, handle design, and the color combination. Nice!

-
Spoiler:


Inspired by Sos24, here are two of mine from Ferrum Forge. Smaller one above is the Ferrum Forge x Massdrop(Made by WE) Falcon Winged edition, while the bigger one is the Ferrum Forge Pro Series Fortis 2.0 Flipper, I really like what they did to reduce the weight of the handle, making it a perfectly balance folder.
I am hoping to see a Lego Predator.
And those look really nice. I do not have any high-end folders, still thinking about it.
-
@ReamerPunch said:
Has this issue been ignored all these years?
I would not mind trying out a $30 PowerPlay or something, but the Switchplierno, just no.I have the PowerPlay and PowerAccess, and love them both. The PowerAccess is great for pocket carry EDC. Even though it's a little rough around the edges, it's my new favorite for daily carry.
The PowerPlay I've been consistently impressed with. The file sucks, but everything else just works, and works well. I was so impressed with both of these that I snagged the Switchplier, hoping for an even lighter weight, fun, and one-handed tool for EDC... and was disappointed. SOG makes some good stuff, but this one is a stinker. And even as I say that, I want to play with it and carry it and use it. The design is just so cool, but the implementation of the pliers is a huge let down.
Fortunately SOG's warranty support has been pretty good, and they're going to let me either get a replacement, swap it for a different tool, or get credit in their store. So... I may end up with a PowerPint or PowerLitre instead. I havent' decided yet.
Charles.
-
Day 11
Fox 439 Mossy Oak
A modern take on the traditional three blade hunting folder. The three blades each have their own liner lock. The handle material is aluminium with a rubber coating.

-
Day 11
Who doesn't like the Sodbuster Jr. ? Solid little knife ;)
Apart from the looks I like the grip and feel on these bone handles a lot...
-
That´s a nice one Matt

-
@Dunc said:
Actually it wasn’t that sharp out the box , but it is now :D
@ReamerPunch said:
I am hoping to see a Lego Predator.
And those look really nice. I do not have any high-end folders, still thinking about it.
:D Stick around, it's coming!
And thank you, I guess in this hobby, it could go insanely expensive and value is rather subjective matter. What I like most about some of the WE collaboration/offering is their folders are offering mid-tech or high end production folder precision and material, but still priced below most of the mid-tech knives.
@Ron Who said:
Day 11Fox 439 Mossy Oak
A modern take on the traditional three blade hunting folder. The three blades each have their own liner lock. The handle material is aluminium with a rubber coating.
Ron, you got me quite curious, how does three different blades all have liner lock while keeping the chassis narrow? I gonna move over to youtube to check this out now.
-
@comis said:
Ron, you got me quite curious, how does three different blades all have liner lock while keeping the chassis narrow? I gonna move over to youtube to check this out now.The three blades are separated by two liners, doubling as lock bar for the outer two blades. The saw in the middle uses the back of one liner as lock bar. Thus like the Buck Alpha Crosslock, one liner provides two lock bars. I´ll have pics in a few minutes.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
