MTO Unleashed!
-


Inspired by Sos24, here are two of mine from Ferrum Forge. Smaller one above is the Ferrum Forge x Massdrop(Made by WE) Falcon Winged edition, while the bigger one is the Ferrum Forge Pro Series Fortis 2.0 Flipper, I really like what they did to reduce the weight of the handle, making it a perfectly balance folder.
Nice pair
-
@cody6268 said:
Day 10. Felt I needed pretty much the same toolset as yesterday, but that's my only Tinker. Enter one of the half a dozen (and another on the way!) Spartans I own.Victorinox Spartan Ruby Translucent; ASEA Brown-Boveri. It was picked up because ABB has a transformer plant in a neighboring county that I've toured (and in fact, I was going to buy one of these before we went there to carry for the trip) and part of that work (winding the cores) is outsourced to a manufacturing firm here in town. After seeing all the ugly faded knives, I said I would never buy a translucent scaled SAK. My opinion started to change when I got my Silvertech Huntsman back when we did the Huntsman challenge last year. Not long after, I got an emerald Classic SD in a lot. But, this is my first true translucent 91mm in my arsenal.
I can date this one too--the arrow is pointing to "11" inside the scale--so 2011? And kudos to ABB for putting their logo on the back scale; and not the front. I guess being Swiss; they have respect to the SAK. The thing on the left is a "soil knife" which I use for digging up thistles. I thought it would hold a good edge--but I cannot for the life of me sharpen the thing due to a steel that appears to be harder and tougher than D2. It is boron steel; which I view as only being good for structural applications. But very tough. Also note how little rust it got from being accidentally left outside (I lost it) for three days. Something tells me low in carbon.

I think that's one of the selling point of SAK, is its stainless-ness. Not every knife I'd trust to be fine in my pants pocket during the hot humid summers, but SAK I can always trust to be fine.
@ChopperCharles said:
Day 6: SOG SwitchplierHere is the SOG Switchplier that I bought yesterday, and immediately broke 20 minutes later. Cutting 12ga copper wire. House wiring. The stuff that normal multitools make short work of.... killed this SOG.
In the first pic, you can see that the switchplier is jammed closed. It is spring-loaded, it should not be sticking.
The second pic shows the problem, but it's hard to see. The pin is not long enough, and has popped out of the handle on the left side, stretching the frame apart. The plier head is slightly canted to the right.
The third pic shows the galling damage to the handle. This damage, plus damage to the pin itself, means the pin now pops out even under light pressure. D'oh.
Finally, here's a video that shows the problem in action:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Charles.
Sorry to hear about this, I hope it could be returned or at least warranty would cover this. Make no sense a multitool fail under light use.
-
@Sos24 said:
Back in NROTC, I started carrying a classic for dress uniform pre-inspections. I lost it at some point and replaced with a LM Micra. The Micra was bumped when I discovered the Rambler and has been riding keychain duty every since.You can have a picture of my Navy scale Rambler and modded (bladeless) Rambler, but to see the current one you will jave to wait until at least tomorrow.

@Mechanickal said:
Day 10Traditional!

Pretty cool shot, look at that shallow depth of field. Was it even taken by a cell phone or an actual camera?
:D
-
@comis said:
Pretty cool shot, look at that shallow depth of field. Was it even taken by a cell phone or an actual camera?Cell phone!
All my pics so far were phone pics.
It's a Motorola One Action with triple back lens. It can mimic the depth of an actual camera.
At only €180, it's a super budget phone!! -
DAY 11
2 Smith & Wesson ExtremeOps knives




-
Day 11
Going traditional to my roots as a farmer's son with this Remington stockman. I believe it was made by bear and sons from what I've read online . A great pattern, and a pretty looking knife


-
That's a nice knife Storm

-
@Mechanickal said:
Cell phone!All my pics so far were phone pics.
It's a Motorola One Action with triple back lens. It can mimic the depth of an actual camera.
At only €180, it's a super budget phone!!That's pretty amazing!
2 Smith & Wesson ExtremeOps knives

Ivo, how are the qualities of these two?

-
DAY 11
If Stormtroopers were issued knives

This arrived a short while ago , I’ve wanted one for ages and then found out Copper &Clad ship to the UK.
S30v blade , black and white Cerakote.
5E173872-A124-4F8E-9008-ABFD3F4D1946 by Duncan Moore, on Flickr
84066EE6-DEBF-43A9-B381-78E96EDEBFC0 by Duncan Moore, on Flickr -
Powernoodle Day 11
*
ThePeacent kindly gifted this original Cold Steel Vaquero to me a few years ago. I love the old school Cold Steel models.* -
@powernoodle said:
Powernoodle Day 11ThePeacent kindly gifted this original Cold Steel Vaquero to me a few years ago. I love the old school Cold Steel models.[/i]
I bet you enjoy Sharpening that :D
-
Nice knives and pics everyone!
Day 11
When filling watering cans on Monday, I noticed that the outside tap handle had worked loose, then promptly forgot about it! We’ve had rain since then, so I haven’t had cause to look at it since then, but whilst checking window seals just now, I remembered it needed tightening up, so SwissTool Spirit in hand, I used the in-line Philips to tighten the screw up. This is the shiny silver one I was “encouraged” to get during the March Madness challenge intending it to be my take to work SwissTool Spirit, but then lockdown, so it only gets an occasional outing on my belt.


-
If Stormtroopers were issued knives

This arrived a short while ago , I’ve wanted one for ages and then found out Copper &Clad ship to the UK.
S30v blade , black and white Cerakote.
5E173872-A124-4F8E-9008-ABFD3F4D1946 by Duncan Moore, on Flickr
84066EE6-DEBF-43A9-B381-78E96EDEBFC0 by Duncan Moore, on Flickr
Day 11.
Remington P1907 Bayonet, for the SMLE 303 rifle. September 1915.

-
I have a sweet spirit, and find joy in the mundane.
Actually, its not that fun. Gotta use rat tail file to get in between the serrations. At least that's how I do it. Fortunately, a serrated knife stays "sharp" longer than a plain edge. I don't think its really possible to sharpen those micro serrations.
-
Day 11 brings a couple of special knives.
The first is a Black box Winchester Texas Toothpick in old Rodgers bone . This was kindly given to me by my friend Robert (SAK Guy)
The second is my birth year 1967 Wenger soldiers knife very generously gifted to me by Barry Rowland

-
If Stormtroopers were issued knives

This arrived a short while ago , I’ve wanted one for ages and then found out Copper &Clad ship to the UK.
S30v blade , black and white Cerakote.
5E173872-A124-4F8E-9008-ABFD3F4D1946 by Duncan Moore, on Flickr
84066EE6-DEBF-43A9-B381-78E96EDEBFC0 by Duncan Moore, on FlickrThis BUCK looks sharp!
Day 11.
Remington P1907 Bayonet, for the SMLE 303 rifle. September 1915.People used to say knife with gun maker name usually don't have very high quality, I bet it's a different story back in those days.
@SteveC said:
Day 11 brings a couple of special knives.The first is a Black box Winchester Texas Toothpick in old Rodgers bone . This was kindly given to me by my friend Robert (SAK Guy)
The second is my birth year 1967 Wenger soldiers knife very generously gifted to me by Barry Rowland

Both are meaningful carry, very nice! I wonder how's Robert doing? Haven't seen him around for a while.
-
**Day 11: **This is a collection of folders that I inherited from my father in-law.
On the left are three Schrade stockman knives.
On the right, top to bottom: Clauss floral, a Camillus electrician, and a Case trapper..jpeg)
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login