ZapWizard's Leatherman Free P4 Mods
-
I got my T-Shank holder today and installed. Very nice. I shortened my file and will do the saw tomorrow. It also fits in my RAE Gear sheathe just fine!
Thanks for all the effort you put into making my P4 a mini Surge! -
:ahhh
Too many cool mods!!!
Awesome work ! -
My P4 with some of the mods I've done..... Besides the ZapWizars's great products, I also sharpened the awl to make it proper one.

-
Great work on your mod, Slygrin


-
Installed the t-shank holder, see post above. I have a Surge, so I bought a new file and saw blades from Leatherman to use with the P4. I shortened the file and it will be the blade I use the most. I started looking at the saw blade and I can't make up my mind if I should shorten it or not. If I shorten it, it will not matter which one I have in the tool. If i leave the saw at the original length, it will have the advantage of having more cutting length, but I will not be able to close it. I would have to put the file back in to close it. Oh, the dilemma.... So, what would you do? Don't mind the cat hair in the picture....

-
I would leave the saw as long as possible if it were me
How much are we talking about shortening it BTW
The file would still be just as functional if it were a bit shorter but a saw on a MT is already a bit short so making it even shorter is never good :ahhh I think the OHT has a saw that is too short, it is functional but just barely :D -
I've decide to leave the saw blade alone. Another bonus is I can use the same blade with my Surge and only carry one. One thing I would recommend with the bit holder and t-shank holder. Sand and smooth out the back end of the bit. When deploying, I notice a little roughness. I don't find it a big enough issue to take it apart to fix, but I'll do it the next time I take it apart.
-
The T-Shank holder is done!
The produce page is live (store link in my signature)Coming up: A collaboration with fellow Multitool.org member Metropolicity
I shared my Leatherman FREE CAD T-Shank CAD data with him in exchange for his CAD file for his Leatherman Charge Scalpel holder
So now I can get cracking on a making one for the FREE series.Wow.

-
, part 2 :D
-
Small Free P4 based tool kit using some of ZapWizard's mods and accessories. The kit brings the versatility of some older Leatherman offerings to the Free series, and there is space for one or two Victorinox additions ;)


-
Amazing tool kit.
FYI, I am thinking about making a tweezer holder that replaces the pliers side spacer near the scissors. (Nylon piece with a small cutout really).
-
That all looks great, DT :o 8) Great pics and bit of kit

-
Thanks guys :D
Good news on the tweezers holder Zap, looking forward to that
I discovered I need to make a small notch in the file to allow the plier head tooth to engage the handle
-

Metropolicity sent me the CAD file for his Leatherman Charge Scalpel holder.
I will defiantly use it for inspiration and dimensional reference, but as it my style I will do my own design from scratch. He has lots of nice details in there though, such as a bump the bends the blade, to cause angled force holding it in place.
He also sent me four different large scalpel blades. For each one: I took a detailed macro photo and created a precise 3D model of each blade.

A Havalon #60A Blade (0.62mm thick)
A Wiebe Knives Replacement Blade (0.5mm Thick)
A #22 Scalpel Blade (0.4mm thick)
A Swann Morton #26 Scalpel Blade (0.4mm thick)I have also ordered some Havalon #60XT (Extra Thin) blades, and some #4 and #3 blade handles from Swann Morton to use as reference. (Since they invented these things)
I will get started on a 3D design for the FREE series using what I have now though. The plan is to make something that allows for the largest number of different blades, while only replacing either the main or serrated blades which are 0.1" (2.54mm) thick.
-
So Shapeways has been saying they would be listing my more popular products on their small Amazon.com store for over a year now. Something I was going to do myself at one point. I even went as far as buying up a set of UPC codes. But then I realized that folks wouldn't be able to customize, I would have to purchase inventory, and Amazon would be taking a large cut.
However, today I noticed my first Amazon.com order come in. So I checked and they finally listed one of my items! Thumb tabs for the FREE P4.
Item number: B087QRZ6VN and B087QS9GGSI have mixed feeling on this.
They are listing them for $29.66 + Free shipping. Standard shipping is $8.99 in the U.S. for Shapeways, so Amazon is taking a $5.67 fee, which actually sounds about right from my research.
But they listed it with just two one colors: Pink and White. These some of the most unpopular colors I sell. And you can't even find the pink except by the related listing to the white.
The white color get dingy faster than a pair of sneakers, so I hope anyone ordering from Amazon will take the time to use some alcohol markers (or a sharpie) to dye the tabs.Initially they said the listing on Amazon would be a copy of what is on the Shapeways store, however it is just a cropped copy/paste with no formatting.
-
Re Scalpel Holder: looks nice, looking forward to the design. Not sure I'll get it but I understand there is some demand for one :D

-



How is this for one day of design.
I kept most of Metropolicity's profile for the actual blade grip, and then built around it.
It has a built-in thumb-tab, and because the blade is on the inside, it should help keep you thumb away from the blade while deploying.That said, I am going to only recommend either the 60A blade from Havalon, or the Wiebe Blades be used. This is because these are the only blades long enough to ensure the blade stays docked when using the pliers.
I will offer it in a mirrored version for replacing the serrated blade instead of the main blade.For now, I will sit on the design until my handles arrive.
-
@Dutch_Tooler said:
Small Free P4 based tool kit using some of ZapWizard's mods and accessories. The kit brings the versatility of some older Leatherman offerings to the Free series, and there is space for one or two Victorinox additions ;)
DT & ZapWizard
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
