MTO Unleashed!
-
Powernoodle Day 22
*
I opened 10 bags of mulch this morning with a Cold Steel Hold Out 1. It works! The thin profile of the Hold Out 1 makes it surprisingly easy to carry this 6" blade. This was a new knife, and notice how quickly the coating wears. *
-
@powernoodle said:
Powernoodle Day 22
*
I opened 10 bags of mulch this morning with a Cold Steel Hold Out 1. It works! The thin profile of the Hold Out 1 makes it surprisingly easy to carry this 6" blade. This was a new knife, and notice how quickly the coating wears. *

It should look quite nice in no time. I would prefer that kind of wear to the sort I’ve seen with very thick coatings that chip and gouge out and leave a rough looking finish.@pfrsantos said:
**Day 22: **A small/medium Browning folder, the Obsession. Very smooth opening. Very good knife, no blade play, great edge. Love the deep carry clip.


-
Day 22.
Two different knives and brands from the same year. ‘72.
-

"Doh! It's only Monday!"
These are few interesting CRKT I have collected, M16 at the bottom has a switch to secure it's liner lock, so it won't deactivate while your blade is out. The Endorser in middle is an assisted knife, and has a thumbstud 'switch' to release the blade from the detent, and they call this mechanism 'outburst' assist. Top knife the Cuatro, I simply like it's simplicity and very light weight design.

I do like the top one.
I’m keeping an eye out at present for a couple of CRKT’s the Sakimori and Shinbu. Both discontinued. -
@sak60 said:
[The wear on the Cold Steel Hold Out] should look quite nice in no time. I would prefer that kind of wear to the sort I’ve seen with very thick coatings that chip and gouge out and leave a rough looking finish.

Yeah I definitely agree. The old coating Cold Steel used to employ would wear off almost instantly. That's what is on my Hold Out. Cold Steel has moved to a diamond-like coating which is much more durable.
-
Day 17: Ozark Trail Multi-Force
I missed yesterday, so I'm posting late. My bad!
I used this tool all day yesterday. It's heavy as balls, but it's a great tool and I prefer it to the Wave. Why? The bit driver for starters. Full-size 1/4" bits is a big deal, there's a much larger selection of double-ended bits than there are Leatherman bits. I also prefer the way the blades open on the opposite pivot, so everything can be tightened and adjusted perfectly. This also leaves out a lot of complicated locks that Leatherman uses to ensure the blades don't open in pliers mode. With the blades on the opposing pivot... they just can't. No extra intricate lock needed. It comes WITH a pocket clip, a case, and an extension for double-sided bits. Here is my EDC setup. I keep the extension and a rail of WiHa double-sided bits on a rail in a little mini sheath I got somewhere. That goes in my back pocket, and the Ozark gets clipped into my front right pocket.
Here's the bit kit all attached.
Here's the sheath and storage for the bit extension (I don't use this setup, but I do store it this way)
And here's the tool all opened up
Charles.




-
More on that Ozark Trail. Here's my use for it yesterday!
Disassembling motorcycle:
Filing burs off of holes drilled in aluminum angle iron:
And sawing through an old, extremely dry 1x4. It took 20 seconds to make this cut.
Charles.



-
There’s some lovely cutlery on this thread!
Day 22
The last of my Wengers to show here, it’ll be all Victorinoxes from here on in! This is a watch back opening tool and knife branded for Omega in a lovely blue.....

-
**Day 22: **Mr pinchy. This and a Dime are the only Gerber I own. MP600 Pro Scout.
.jpeg)
-
Day 22
Fox 500/3CE
Another traditional folding hunter, Italian this time.

-
DAY 22
ESEE 5 and Buck 722 Spitfire with small outdoor kit. One of the two knives I take with me into utility right of ways on the job, just in case. While walking just past the tree line, I noticed one of the biggest mushrooms we get in this part of Appalachia. Fly Amanita (I think - there's so many freakin types of mushrooms). Went back later and it measured 8" across and 10.5" tall.


-
Day 18: Tac-Force Razor Stonewashed assisted-opening Cleaver
This is one of my only "Tacti-cool" knives. It's a cheap (Currently $17 on Amazon) knife, but is of surprisingly good quality. It's heavy, it's long (9" end-to-end when opened), it's sharp, and it just feels well made.
This knife is heavy. At 8.8 ounces, it's heavier than an MP600 by almost an ounce (0.8oz). The scales and liners and blade are all extremely thick, there is just a ton of metal here. It's long and fits the hand well, and all the edges are nicely rounded. The pocket clip works well, the handle incldues a lanyard hole and a glass breaker. (Though it's just stainless, no tungsten). The blade itself is assisted opening.
I bought this as a camp knife, and I keep it in a pouch on my motorcycle. It's been in high humidity, rain storms, and exposed to the weather in a leather pouch since 2018, and there's not a speck of corrosion on it. So that's a pleasant surprise from an inexpensive knife.
The thing I really like about this is the heft. When I flick it open, the assisted opening spring SNAPs it open with authority. The knife itself feels beefy enough to be used to chop wood, as a miniature axe. It's an all around interesting, fun knife for use at the campsite. It even works passably at meal prep. (It's certainly sharp enough). I don't EDC it because of the weight, and because I generally dont' like to look tactical in any way. I usually prefer more unassuming knives that don't get peoples' hackles up. But man... I'm glad I made an exception for this thing. It's really fun to use.
So today I'm going to EDC it all day, despite the weight :)
Charles.


-
I'm really digging that Ozark Trail MT, Charles.

-
Day 22
Used the Victorinox Cybertool L aka CT41 to dismantle an old harddrive.
For me the CT41 is like a modernized SwissChamp. I miss the magnifier sometimes.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

:D

