MTO Unleashed!
-
Day 17: Ozark Trail Multi-Force
I missed yesterday, so I'm posting late. My bad!
I used this tool all day yesterday. It's heavy as balls, but it's a great tool and I prefer it to the Wave. Why? The bit driver for starters. Full-size 1/4" bits is a big deal, there's a much larger selection of double-ended bits than there are Leatherman bits. I also prefer the way the blades open on the opposite pivot, so everything can be tightened and adjusted perfectly. This also leaves out a lot of complicated locks that Leatherman uses to ensure the blades don't open in pliers mode. With the blades on the opposing pivot... they just can't. No extra intricate lock needed. It comes WITH a pocket clip, a case, and an extension for double-sided bits. Here is my EDC setup. I keep the extension and a rail of WiHa double-sided bits on a rail in a little mini sheath I got somewhere. That goes in my back pocket, and the Ozark gets clipped into my front right pocket.
Here's the bit kit all attached.
Here's the sheath and storage for the bit extension (I don't use this setup, but I do store it this way)
And here's the tool all opened up
Charles.




-
More on that Ozark Trail. Here's my use for it yesterday!
Disassembling motorcycle:
Filing burs off of holes drilled in aluminum angle iron:
And sawing through an old, extremely dry 1x4. It took 20 seconds to make this cut.
Charles.



-
There’s some lovely cutlery on this thread!
Day 22
The last of my Wengers to show here, it’ll be all Victorinoxes from here on in! This is a watch back opening tool and knife branded for Omega in a lovely blue.....

-
**Day 22: **Mr pinchy. This and a Dime are the only Gerber I own. MP600 Pro Scout.
.jpeg)
-
Day 22
Fox 500/3CE
Another traditional folding hunter, Italian this time.

-
DAY 22
ESEE 5 and Buck 722 Spitfire with small outdoor kit. One of the two knives I take with me into utility right of ways on the job, just in case. While walking just past the tree line, I noticed one of the biggest mushrooms we get in this part of Appalachia. Fly Amanita (I think - there's so many freakin types of mushrooms). Went back later and it measured 8" across and 10.5" tall.


-
Day 18: Tac-Force Razor Stonewashed assisted-opening Cleaver
This is one of my only "Tacti-cool" knives. It's a cheap (Currently $17 on Amazon) knife, but is of surprisingly good quality. It's heavy, it's long (9" end-to-end when opened), it's sharp, and it just feels well made.
This knife is heavy. At 8.8 ounces, it's heavier than an MP600 by almost an ounce (0.8oz). The scales and liners and blade are all extremely thick, there is just a ton of metal here. It's long and fits the hand well, and all the edges are nicely rounded. The pocket clip works well, the handle incldues a lanyard hole and a glass breaker. (Though it's just stainless, no tungsten). The blade itself is assisted opening.
I bought this as a camp knife, and I keep it in a pouch on my motorcycle. It's been in high humidity, rain storms, and exposed to the weather in a leather pouch since 2018, and there's not a speck of corrosion on it. So that's a pleasant surprise from an inexpensive knife.
The thing I really like about this is the heft. When I flick it open, the assisted opening spring SNAPs it open with authority. The knife itself feels beefy enough to be used to chop wood, as a miniature axe. It's an all around interesting, fun knife for use at the campsite. It even works passably at meal prep. (It's certainly sharp enough). I don't EDC it because of the weight, and because I generally dont' like to look tactical in any way. I usually prefer more unassuming knives that don't get peoples' hackles up. But man... I'm glad I made an exception for this thing. It's really fun to use.
So today I'm going to EDC it all day, despite the weight :)
Charles.


-
I'm really digging that Ozark Trail MT, Charles.

-
Day 22
Used the Victorinox Cybertool L aka CT41 to dismantle an old harddrive.
For me the CT41 is like a modernized SwissChamp. I miss the magnifier sometimes.

-
@sak60 said:

I do like the top one.
I’m keeping an eye out at present for a couple of CRKT’s the Sakimori and Shinbu. Both discontinued.These both look like "Kaiken" type of Japanese short knife/dagger, pretty interesting offering.
@ChopperCharles said:
Day 17: Ozark Trail Multi-ForceI missed yesterday, so I'm posting late. My bad!
I used this tool all day yesterday. It's heavy as balls, but it's a great tool and I prefer it to the Wave. Why? The bit driver for starters. Full-size 1/4" bits is a big deal, there's a much larger selection of double-ended bits than there are Leatherman bits. I also prefer the way the blades open on the opposite pivot, so everything can be tightened and adjusted perfectly. This also leaves out a lot of complicated locks that Leatherman uses to ensure the blades don't open in pliers mode. With the blades on the opposing pivot... they just can't. No extra intricate lock needed. It comes WITH a pocket clip, a case, and an extension for double-sided bits. Here is my EDC setup. I keep the extension and a rail of WiHa double-sided bits on a rail in a little mini sheath I got somewhere. That goes in my back pocket, and the Ozark gets clipped into my front right pocket.
Here's the bit kit all attached.
Here's the sheath and storage for the bit extension (I don't use this setup, but I do store it this way)
And here's the tool all opened up
Charles.
It is interesting to see MT with 1/4 bits. I actually think the Klecker design on having a moving lug to secure the blade in the chassis is genius, but I can see your point of simplifying it to bring down the price point and allow more room. Using regular hex is also a good choice, at least it allow easy adjustment of the blades retention, which is actually a more pressing issue than worrying about blades coming out while pliers in use(in my mind).
-
@powernoodle said:
I'm really digging that Ozark Trail MT, Charles.

-
Day 22 (Happy Anti-Fascist Struggle Day!):
Today's carry is the delightful Case Barlow:

Razor sharp edge on this knife. I like both the pen and the main blade, although the orientation means that I open the main blade most of the time and it does most of the work. I'd love to see this knife in a larger size. A main blade size, with appropriate handle, of 3"-3.25" would be excellent. Nevertheless, for EDC purposes, this little gem is more than adequate.

-
@McStitchy said:
Day 22Used the Victorinox Cybertool L aka CT41 to dismantle an old harddrive.
For me the CT41 is like a modernized SwissChamp. I miss the magnifier sometimes.
McStitchy- I’m with you there, a magnifier is so handy and the rather expensive solution is the Cybertool Lite - mine is just a CT41 mod now as I used the lite/mag layer to add to a compact to create my InvesTigator (which will feature later in this challenge! Or a SwissCard lite which also has a mag - a good companion to the aloxes too for that matter as it adds scale tools and a light!
-
You guys are going to cause me to get a divorce. Now I'm wanting to start a CASE knives collection as well. Those scales are beautiful, Nix!
And YES! Happy Anti-Fascist Struggle Day! -
I missed so much after not reviewing most of yesterday. There were some really nice knives and multitools of all different patterns.
-
-
Day 22
I got the Gerber Prodigy after seeing Stephen Lang's character in Terra Nova edc'ing it,on his calf.
I thought it was pretty cool,for a cool actor.

-
@powernoodle said:
I'm really digging that Ozark Trail MT, Charles.
If you're interested in a comparison to the Wave, this video is a very thorough and detailed review/comparison:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
For $37.77, with a sheath, pocket clip, and extension, it comes in around $100 cheaper than the Wave for very, very similar quality, and in my opinion better functionality.
It's perfect for a gift for someone who is not into multitools or knives, perfect for gloveboxes, and also perfect for EDC (except for being a bit on the heavy side). It's a great all-around tool and I really enjoy using it.
Charles.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
