30 Day Off-Brand Challenge
-
@Juan el Boricua said:
Nice job on the handle!
Would you say the saw was comparable to Leatherman's, Gerber's ,SOG's, or none? Jist curious.
I do not have a Gerber with a saw. The Roxon saw is good. Its spine is ground thinner than the teeth, but not as big a difference in thickness compared to a Leatherman saw's teeth and spine. Still, it locks firmly, the teeth are properly aggressive, it has a good length, and it just works.
-
Day 22


I also modified a Cricket sparker insert. The plug is just pressed in, and it had come off. So I crimped a hook screw into a ring, cut a little off the tip, cut the spring, and screwed it in the sparker. It started splitting as it is very thin plastic, but the screw holds tightly, it is much easier to grip, and it can be put on lanyards, zippers, keys etc.

-
Wasabi peas are best peas.
-
@ReamerPunch said:
Day 22
I also modified a Cricket sparker insert. The plug is just pressed in, and it had come off. So I crimped a hook screw into a ring, cut a little off the tip, cut the spring, and screwed it in the sparker. It started splitting as it is very thin plastic, but the screw holds tightly, it is much easier to grip, and it can be put on lanyards, zippers, keys etc.If it looks like the plastic is going to keep splitting, you can try wrapping it with sewing thread, then soaking the thread with super glue. It works great, and is super inexpensive.
Those plier jaws and their hard-wire cutters are pretty impressive. Bending and cutting hook screws is definitely beyond my Camping Tool. That's usually more of a Leatherman or Swisstool sort of job.
-
@ReamerPunch said:
I do not have a Gerber with a saw. The Roxon saw is good. Its spine is ground thinner than the teeth, but not as big a difference in thickness compared to a Leatherman saw's teeth and spine. Still, it locks firmly, the teeth are properly aggressive, it has a good length, and it just works.Sounds good then; thanks!

-
@Jothra said:
If it looks like the plastic is going to keep splitting, you can try wrapping it with sewing thread, then soaking the thread with super glue. It works great, and is super inexpensive.Those plier jaws and their hard-wire cutters are pretty impressive. Bending and cutting hook screws is definitely beyond my Camping Tool. That's usually more of a Leatherman or Swisstool sort of job.
I may put some glue but the screw is fine in there.
Those hook screws are rather soft, and that one was tiny. I bet a Juice could do the job.
-
Day 23


I got rid of all the split ends of the dowels I found the other day.


-
@ReamerPunch said:
I may put some glue but the screw is fine in there.Hooray!
@ReamerPunch said:
Those hook screws are rather soft, and that one was tiny. I bet a Juice could do the job.Sure, but a Coghlan's Camping Tool is no Juice. We'll call it a soft maybe.
-
@ReamerPunch said:
I got rid of all the split ends of the dowels I found the other day.It's nice to see a decent saw. The saw is another tool that's really easy to mess up.
-
Day 24


I also took these apart. I am thinking they'll be good for a cash stash, or maybe bits or a tiny fishing kit.

-
Well, another week and this will be done.

I am at a wonderful stage, where the tool feels small and light. I do not notice the weight at all. And this thing is loaded with tools. And the Phillips is a star. It gets outshined by the monster scissors, but the Phillips is also pretty great. Rock solid, properly shaped, and it also takes the bit adapter. I love it!
-
Hey! Hey, Roxon!

The 4mm bit fits perfectly in there. Of course it has no retention and can fall out at any moment, but it does not spin. And the handle is not perfectly straight like that, but there is something there.
-
@ReamerPunch said:
Hey! Hey, Roxon!

The 4mm bit fits perfectly in there. Of course it has no retention and can fall out at any moment, but it does not spin. And the handle is not perfectly straight like that, but there is something there.
I like where your head is at
-
It's just a thought. Major design changes would have to be made for something like that to work. Having the bit sit in a driver that pivots on a scissor blade that pivots on the other scissor blade which pivots on the handle is not an ideal screwdriver handle. But there is potential.

-
Day 25

Replaced a zipper. Well, placed, not replaced. I do not know where the original went.


And I needed a disposable cup for some impromptu plumbing.

-
You get Vanilla Coke there? They keep releasing it here every few years just so they can take it away.
On topic now! Zippers have the dubious distinction of being both a miracle of engineering and a supreme pain in the butt. Nice fix.
-
Day 26

Are your pills double the recommended dosage? Are you tired of trying to use ten different tools to split them in two, only to ruin them completely? Try our patented pill-splitter! Perfectly split any pill, tablet, or lozenge in seconds! Try it now!
Keep out of reach of children. Read instructions before use. If symptoms persist blame Kirky.
-
Day 27


-
At this rate you won't be able to go back to other tools :ahhh
Nice DIY ranger bands, how are they? I've wanted ranger bands before but never tried an innertube, any particular use in mind?
-
I am replacing all my rubber bands, because they deteriorate and start sticking onto stuff and make a mess, and they also snap easily. Ranger bands should last longer, and I can make them the width I want. They're nice for umbrellas, pens, zipties, small boxes, cloth bags, rolls of seatbelt webbing, all sorts of stuff.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login