30 Day Off-Brand Challenge
-
Day 24


I also took these apart. I am thinking they'll be good for a cash stash, or maybe bits or a tiny fishing kit.

-
Well, another week and this will be done.

I am at a wonderful stage, where the tool feels small and light. I do not notice the weight at all. And this thing is loaded with tools. And the Phillips is a star. It gets outshined by the monster scissors, but the Phillips is also pretty great. Rock solid, properly shaped, and it also takes the bit adapter. I love it!
-
Hey! Hey, Roxon!

The 4mm bit fits perfectly in there. Of course it has no retention and can fall out at any moment, but it does not spin. And the handle is not perfectly straight like that, but there is something there.
-
@ReamerPunch said:
Hey! Hey, Roxon!

The 4mm bit fits perfectly in there. Of course it has no retention and can fall out at any moment, but it does not spin. And the handle is not perfectly straight like that, but there is something there.
I like where your head is at
-
It's just a thought. Major design changes would have to be made for something like that to work. Having the bit sit in a driver that pivots on a scissor blade that pivots on the other scissor blade which pivots on the handle is not an ideal screwdriver handle. But there is potential.

-
Day 25

Replaced a zipper. Well, placed, not replaced. I do not know where the original went.


And I needed a disposable cup for some impromptu plumbing.

-
You get Vanilla Coke there? They keep releasing it here every few years just so they can take it away.
On topic now! Zippers have the dubious distinction of being both a miracle of engineering and a supreme pain in the butt. Nice fix.
-
Day 26

Are your pills double the recommended dosage? Are you tired of trying to use ten different tools to split them in two, only to ruin them completely? Try our patented pill-splitter! Perfectly split any pill, tablet, or lozenge in seconds! Try it now!
Keep out of reach of children. Read instructions before use. If symptoms persist blame Kirky.
-
Day 27


-
At this rate you won't be able to go back to other tools :ahhh
Nice DIY ranger bands, how are they? I've wanted ranger bands before but never tried an innertube, any particular use in mind?
-
I am replacing all my rubber bands, because they deteriorate and start sticking onto stuff and make a mess, and they also snap easily. Ranger bands should last longer, and I can make them the width I want. They're nice for umbrellas, pens, zipties, small boxes, cloth bags, rolls of seatbelt webbing, all sorts of stuff.

-
@ReamerPunch said:
Hey! Hey, Roxon!

The 4mm bit fits perfectly in there. Of course it has no retention and can fall out at any moment, but it does not spin. And the handle is not perfectly straight like that, but there is something there.
Interesting, but I have two of these tools, and I believe if you put any pressure on that handle, it will twist and bend!
It reminds me of the SOG Reactor, where people would use the driver bit while it was in the holder, which was one of the handles of that tool, with bad results!
-
I'm not saying we could drive bits as it is, but looking at it, it reminded me of the CenterDrive. Roxon could experiment with a long bit driver. They're halfway there already.
-
@ReamerPunch said:
Day 27

Nice, made some ranger bands myself the other day

Sent fra min FRD-L09 via Tapatalk
-
@ReamerPunch said:
I'm not saying we could drive bits as it is, but looking at it, it reminded me of the CenterDrive. Roxon could experiment with a long bit driver. They're halfway there already.

-
Day 28


-
Day 29

I prepared a jug for the bottle cutting jig.

It is fantastically strong, as it is thicker than the pepsi bottles. You do not need this to be 5mm wide. Even at 2mm it is stronger than 5mm pepsi ribbon.
Sadly it did not get cut in a single, long ribbon, like the pepsi and mountain dew bottles do. I might be able to do it if I am very careful when feeding the bottle to the jig. It is worth the extra time, since this is very strong. I'll cut a new, 2mm notch, and give it another go, slower.
The jugs are also larger than the 2lt pepsi bottle, and with 2mm ribbon, you could get an incredibly long, durable ribbon.

-
Nice home made jig! What kind of lashing do you use the plastic for?
-
Thanks!

I use it for the odd job around the house, like keeping balcony doors open, clothesline, lanyards. I even tied an awning bar in place.
The funnest thing was pulling up groceries from the balcony. With gloves.
I mainly made the cutting jig just to see if it would work, and because I had a lot of bottles around. And it works. Sure, I have enough paracord and bricklayer's line and many things in between, but why waste those, when you can use waste itself? -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login