3D Printer Blog
-
need something to help judge the scale...
Is it just me that craves a 3D printer to make model kits to then finish and build?
-
It is the size of your average Hot Wheels. Mind you...you can scale up or down in the slicing software. The only limit is your build volume of the printer.
-
I just finished a STUG III Ausf B.I threw in a Vic for scale. These take about 2 to 3 hours to print.
<a href="https://flic.kr/p/2jenQpf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50034488988_9ddac79fca_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8610A by Chako, on Flickr
Here is the Thingiverse file to give you an idea...
And the designer...
-
Latest print...a Sd.Kfz. 251 Ausf. A.
<a href="https://flic.kr/p/2jezpqU" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50036746328_0ba3d77639_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8614a by Chako, on Flickr
And the every growing little family.
<a href="https://flic.kr/p/2jezwhK" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50036769403_7f9755333a_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8612A by Chako, on Flickr
-
:o :o

-
The latest print...a Tiger.
<a href="https://flic.kr/p/2jeQ4bQ" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50039604912_cfacf2375d_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8616A by Chako, on Flickr
<a href="https://flic.kr/p/2jeNHmF" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50039343091_585ad2b8f8_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8618A by Chako, on Flickr
<a href="https://flic.kr/p/2jeQ44k" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50039604477_60a775e9f4_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8619A by Chako, on Flickr
-
Using the glue stick on the smooth side of the glass plate ensures a great contact. In fact, to remove the pieces, I have found that if I let the glass cool down to room temperature,and use water to soak in under the pieces, they come right off easily.
-
The latest...a Sturmpanzer IV Sd.Kfz.166.
<a href="https://flic.kr/p/2jf8LXb" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50043062312_1f0dba1b2d_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8622A by Chako, on Flickr
-
Still churning out little cute tanks. The latest prints is a SU-76i. The 6th in this series.
Before assembly.
<a href="https://flic.kr/p/2jfqUVC" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50046406038_4c0d54ef3d_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8624A by Chako, on Flickr
All done and with the others.
<a href="https://flic.kr/p/2jfqURQ" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50046405818_42fc90a560_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8625A by Chako, on Flickr
Latest Ender 3 update.
I have noticed a growing issue with the spool holder. It is only made of injected molded plastic, and I have noticed a lot of squeaking during a print. When I examined both the 3D printed PLA filament guide and the spool holder, I have noticed some wear and tear. When I was printing my red filament, I noticed a lot of black powder residue on the spool holder as well as the spool . I guess all that rubbing is having an effect. That effect is increased friction and I would guess, more wear end tear on the motor as the extruder is now having to work harder (not to mention the constant squeaking is driving me up the wall). The 3D printed filament guide is also wearing where the PLA is rubbing against the PLA part. I suppose I could print the part out of PETG, as I do have a roll, but I am thinking of somehow modifying the part for a fishing rod hoop. I would think that might work out better, or something like a metal eyebolt might even be better.
The spool holder however has become a bit of a concern as I find myself having to clean both the spool and spool holder surface regularly. I spied a nice setup to upgrade the spool holder off of Thingiverse. In fact, I figure this is a rather common issue as there are a lot of different spool holder upgrade designs on that web site. I settled on one that would require a few 608 ball-bearings. I printed the upgraded spool and required 3 shafts when I had my red PLA installed. I then ordered the ball-bearings off of Amazon as I couldn't source any locally. Most of the places I would have looked were closed at the time due to COVID-19. The ball-bearings took their time, spending well over a month at a huge mail facility in the UK of all places. I wonder why it went through the UK when it was mailed from China. :think:
They finally came in a few days ago. However, I found that the original red shafts that the ball-bearings ride on were too large. I attempted to sand them down but did not like the results. I reprinted them using my now loaded black PLA, making sure to scale them slightly this time using CURA. I knew I should have brought out a set of calipers. Once again just a bit too large for the ball-bearings center holes (I did not want to use a hammer to force the issue). I got smart this time and did my proper measurements...transferred my findings to CURA, and reprinted them. Third time is the charm.
This is more like it. Now they fit nicely. I am not sure if the original shafts were designed to fit a slightly different ball-bearing with a slightly different diameter, or if it was something on my side with CURA and/or the Ender 3 settings. Either way, a bit of playing around fixed the issue.
<a href="https://flic.kr/p/2jfv7Nr" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50047226437_6bdb37169f_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8626A by Chako, on Flickr
Here is the upgraded spool holder with 3 608 ball bearings, each on their now properly fitted shafts so that the ball bearings turn easily.
<a href="https://flic.kr/p/2jfqUHD" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50046405343_3deefee40d_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8627A by Chako, on Flickr
And the original file from Thingiverse.
I hope this will solve a problem with the 3D printer. This one took a bit of time, and a lot of waiting to get the right ball-bearings. I am quite pleased with the results thus far. I did my latest tank print and I didn't hear the usual squeaks. :tu:
-
I finally attempted to do the "Impossible Table" print. Here is the file from Thingiverse.
This was a lot harder then I thought it would be. If I had to do this again, I would combine the table with the support as one piece. I had a dickens of a time gluing the supports to the table. Worse yet, whenever I applied any force with the fishing line, one of the supports would twist away from the table causing everything to crumple into a messy tangle.
I did manage to get it done somewhat with much swearing and cursing.
Here it is.
<a href="https://flic.kr/p/2jfqUDR" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50046405123_44be07e80c_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8628A by Chako, on Flickr
In case you might be wondering, the supports were printed on the little Creality CR-100 in white PLA. the top and bottom was printed using black PLA on the much larger Ender 3.
Yep, Hopefully I won't be doing this one again...I suppose I should be happy for all the character building I guess. :D :rofl:
-
Looks so fun.

-
The table looks amazing once done. It is just assembling it that was so frustrating.

Part of the issue is that the glued supports are not facing each other. they are facing each other at a 45 degree angle. This means, anytime I placed any force on the outer fishing line, it wanted to twist on itself.
The other issue was the glue I used. Maybe the contact cement was not the right glue to use on the supports and table pieces. I am thinking epoxy would have solved my issues. Now where is that tissue... I need something to mop up the tears of joy that the Impossible Table trials are over.

-
The latest little tank...a Panzerjager Tiger (P) Ferdinand.
<a href="https://flic.kr/p/2jfFKWj" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50049302482_f863a18643_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8629A by Chako, on Flickr
The little collection is growing one at a time.
<a href="https://flic.kr/p/2jfFKSB" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50049302267_997dcbe5e3_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8630A by Chako, on Flickr
Today, I received my upgraded springs for the heated bed, and a pair of supports for the Z Axis machine screw. One should shore up the top end nicely. The other will be a spare, or if I decide to buy a dual Z axis upgrade kit down the road.
-

"Dual Z axis upgrade kit"? Do tell... two belts?
-
by the time I get around to ordering mine Chako will have worked out all the upgrades i need so I can just order them directly :P
-
Yes. Along with 2 screws. Not sure this is needed though.
Whoey, you can't go wrong with this printer.
-
I ran into a spot of trouble again recently. I attempted to print another model tank twice with both attempts resulting in failure. I manually leveled the print bed using a piece of paper at each corner. Tried again and this time I lowered myself to better see what was happening. Yeah. The nozzle was too high and when it deposited the filament, it fell down towards the heated bed and refused to stick. Hmmm...I did manually level the printer bed prior to this point.

So something else must be going on.
I auto homed the printer bed and nozzle, and everything looks good. I then examined the menu, and for some unknown reason, my Z-Axis offset was at -1.85.

I thought that now might be the best time to upgrade the bed springs. I bought a set of 8 orange coloured springs that are supposed to be stiffer than the ones that come with the Ender 3. The 4 spring installation went easier than I thought. I can say that the springs are indeed an improvement. I lowered the bed supper low so that the nozzle doesn't crash into the glass plate, turned the printer on, and auto homed the print head. I then went into the menu and placed the Z-Axis offset to 0. Manually leveled the print bed once again using the paper between the nozzle method at each of the 4 corners. Everything looks good now. I am now printing another tank and it appears to be so far successful.
Now, I am thinking that the only thing I did between a successful print and a failure was to use the BLTouch once to auto level the bed. I am thinking I may have to set it up somehow to work properly if that is the case. More reading will have to be done. For now, I am happy once again to have a working printer.
I guess with each failure, I am learning a bit more.
-
The good news...I got the printer once again chugging along nicely. The bad news...my little tank lost a tread as I was removing it from the build plate. It flew into a corner and I couldn't find it. Guess I may have to print the missing part at a later date.

-
I was annoyed about that tank track that flew off into the hard to reach corner. So annoyed that I took out my very first Amazon purchase, an inspection camera. I had to recharge it, and wifi connect with my cell phone. Looked long and hard for the little black piece to no avail.I even looked under the couch with it. I swear the piece disappeared. So today, I am printing out another copy of the same tank along with an extra track. I made sure I was printing the right piece. Figured if I had to print the extra track, may as well print another copy of the tank. Time will tell if all goes well.

-
Meet the latest little guy...a Marder II Sd.Kfz.131. Got two of them due to my losing one of the tracks as mentioned above.
<a href="https://flic.kr/p/2jgSHT2" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50062758291_cdc48abb08_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8636A by Chako, on Flick
And the latest upgrade...shoring up that Z axis screw. Personally not sure if this was even an issue needed fixing or improving. Did it anyways because I was curious to see if there would be any difference. thus far, I haven't seen any improvements...other than the Z Axis screw is more secure and it looks a lot better than just having the Z screw sticking up in the air.
<a href="https://flic.kr/p/2jgSJ1w" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50062758726_8431a5e81f_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8632A by Chako, on Flickr
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login