Warranty stuff
-
They wrote i might have to pay between 9,50 and 23,50€. But i have to send it in Switzerland. No other way
-
And i'm the one who has to pay for the shipping...

-
Weird. I sent in a 1990s SwissTool that a prior owner had clearly abused (right tool handles so stiff I couldn't open them--multiple dinged, bent or otherwised damaged), and our US office in CT just sent me a current production model no questions asked. They charged the maximum I allowed before them calling me; which was $10? I think.
-
I've not had issues with either company here in the States, but I'm beginning to hear more and more quality issues with Vic. I hope this isn't a trend....
-
** Comment deleted due to Edi feeling that it was not a relevant contribution
-
@ElevenBlade. I have no provlems with LM. I think i wrote clear enough what, why, when... I'm not sure how your answer is helpful in this thread. Seriously
-
@Edi said:
@ElevenBlade. I have no provlems with LM. I think i wrote clear enough what, why, when... I'm not sure how your answer is helpful in this thread. SeriouslyNot to worry. I removed my comment from your thread.

-
@ElevenBlade said:
Not to worry. I removed my comment from your thread.
Thank you. I wrote about my question marks about a Spirit that was basically unused. I think half an hour work was the total. Not even actually. 20' max. So, for that, i don't really care about their expenses and how they are managing their entire company. But if you really wanna go there, i can write about esee. Low quality blades overall, exactly like Victorinox steel blades, but outstanding warranty. And i can say LM has better blades, better warranty.
And i wrote about a specific situation. Why do we have to go so deep and actually extremely shallow in the economics that a company may/or may not put in place!? -
And i wrote about a specific situation. Why do we have to go so deep and actually extremely shallow in the economics that a company may/or may not put in place!?
In short, and I mean no disrespect - because you, and your tool, are probably irrelevant to the situation, whereas either the global policies of the manufacturer or the local policies of your retailers and distributors, as well as any applicable state laws probably are.
For example, in my fine country - I can not be held liable for any costs resulting from a faulty product - include shipping, and if the faulty product damages or injures anything in the act of being faulty, the supplier foots the bill for that too (There's pros and cons to high levels of government interference....) - so if the issue were with one of my tools, even if Vic charged eleventy billion dollars for repair, it would be the company that supplied me the tool's problem to pay that, not mine.
the laws in your country may be very different, and the retailer may be free to joyously pass on their costs to you.
As for Vic's role in this - I speculate wildly, but it's possible the older tool is too-hard-basket for them, so they just issue a credit to the store and tell them to give you whatever in return, but they still have/use the tooling for the Multitool, so it is economical for them to get the faulty one into the factory and see if it can be rectified, or salvaged.
What should you think of the whole situation? "Not much"
You are dealing with manufacturers from different nations, through a supplier/retailer in a third nation (who in turn may be dealing with one or more distributors)Might as well compare apples to chainsaws.
-
My dear Sea Monster, and i'm not sarcastic. True... and yes, our EU regulations should apply and should be applied. Not. Simple as that. I'd have to bring Victorinox in Court for the shipping costs. They don't give a rat's ass. My bloody distributor has to pay for the shipping. They aren't doing it. But at least they aren't too... bitchy. It's complicated overall, i just hate the fact that they have to chech a smurfty tool
-
This is it

-
and the tool will get back to me. Then, i'll shoot a video of it
-
And over here, in Belgium, I've had the exact opposite experiences with both companies.
For my flawed Charge TTi (both sides had rulers from 8cm to 16cm, clearly a production error) they wanted me to pay shipping costs and on top of that 15 Euro administration fee (because I didn't buy the tool from a Belgian Leatherman dealer). So I just ended up keeping my flawed Charge TTi as a gimmick (Leatherman U.S.A. did send me a T-shirt and some stickers after I contacted them about the Belgian distributor's "administration fee".)
While Victorinox exchanged my son's "my first SAK" with a new one, no questions asked, no costs (did have to wait 4 weeks for it to arrive, but that was the least of my worries).
Different countries = different distributors = different rules...
-
Nope. Same country different products, rules whateva
-
@Top-Gear-24 said:
Last time I checked you and I don't live in the same country...But hey, I see this is not a topic to post your own experiences with warranty from certain brands, my mistake :-[.
Best of luck with your repairs/replacements
.Correct. This is not the place to post your experiences with warranty repairs and replacements - and CERTAINLY not the place to comment on the economic or legal reasons for different policies and experiences even within the same country at different points in time.
I too was sorely mistaken. -
I had a most excellent experience with Gerber customer service here in the US; they replaced a busted Mr Pinchy with an MP600 blunt nose.
My sole experience with Leatherman customer service is documented here, if it interests anyone;
/topic/61956
-
First of all, sorry. My english is clearly not good enough. And my responses are late. Second; I have no issues with Leatherman and since nobody has a Surge for sale, i decided to buy a new one. Third. With Victorinox, the things are... simple. I'm not buying again. Because of their so called warranty. In order to be as accurate as possible, i took a look at all the tools, 1 by 1 and made an analysis on what and for how long i've used them.
Pliers: made a total of 6 cuts. From thiner cables to some fater/wider ones. It cut them all without me feeling the need to apply an excesive force. Let's make it a double, 12 cuts.
Cross-driver: i've used it on 4-5 screws. It worked, but it has little bends. Let's make it a double, 10 screws.
The scissors: some paper, some paracord and some cardboard. No issues, except the jaws are on the tiny side.
The blade: on a tomato and on some cord. I don't know... 20 cuts?! Let's double it. 40.
Woodsaw: on soft wood, i've cut a 2×4cm piece. Let's make it a double, 2 pieces. Of hardwood.
Metalsaw: i've cut around 2mm on an forged iron fence in order to see if it cuts.
And that was it.
For that, i have to send it in?! For the issues i mentioned in my first post!? Victorinox is no longer an option for me. Can't rely on that company and on their "lifetime" guarantee. I'll send the tool in, i'll get it back (if repair costs will apply i don't care) and i'll give it away. The tool per se and the customer care are not by far what i expect. Some other Vic products are going away also. Going to keep just 2. I really don't want that whole hassle again for... why the heck!? Thank you for your patience and sorry that i couldn't actually get my intended message
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login