Warranty stuff
-
@ElevenBlade. I have no provlems with LM. I think i wrote clear enough what, why, when... I'm not sure how your answer is helpful in this thread. Seriously
-
@Edi said:
@ElevenBlade. I have no provlems with LM. I think i wrote clear enough what, why, when... I'm not sure how your answer is helpful in this thread. SeriouslyNot to worry. I removed my comment from your thread.

-
@ElevenBlade said:
Not to worry. I removed my comment from your thread.
Thank you. I wrote about my question marks about a Spirit that was basically unused. I think half an hour work was the total. Not even actually. 20' max. So, for that, i don't really care about their expenses and how they are managing their entire company. But if you really wanna go there, i can write about esee. Low quality blades overall, exactly like Victorinox steel blades, but outstanding warranty. And i can say LM has better blades, better warranty.
And i wrote about a specific situation. Why do we have to go so deep and actually extremely shallow in the economics that a company may/or may not put in place!? -
And i wrote about a specific situation. Why do we have to go so deep and actually extremely shallow in the economics that a company may/or may not put in place!?
In short, and I mean no disrespect - because you, and your tool, are probably irrelevant to the situation, whereas either the global policies of the manufacturer or the local policies of your retailers and distributors, as well as any applicable state laws probably are.
For example, in my fine country - I can not be held liable for any costs resulting from a faulty product - include shipping, and if the faulty product damages or injures anything in the act of being faulty, the supplier foots the bill for that too (There's pros and cons to high levels of government interference....) - so if the issue were with one of my tools, even if Vic charged eleventy billion dollars for repair, it would be the company that supplied me the tool's problem to pay that, not mine.
the laws in your country may be very different, and the retailer may be free to joyously pass on their costs to you.
As for Vic's role in this - I speculate wildly, but it's possible the older tool is too-hard-basket for them, so they just issue a credit to the store and tell them to give you whatever in return, but they still have/use the tooling for the Multitool, so it is economical for them to get the faulty one into the factory and see if it can be rectified, or salvaged.
What should you think of the whole situation? "Not much"
You are dealing with manufacturers from different nations, through a supplier/retailer in a third nation (who in turn may be dealing with one or more distributors)Might as well compare apples to chainsaws.
-
My dear Sea Monster, and i'm not sarcastic. True... and yes, our EU regulations should apply and should be applied. Not. Simple as that. I'd have to bring Victorinox in Court for the shipping costs. They don't give a rat's ass. My bloody distributor has to pay for the shipping. They aren't doing it. But at least they aren't too... bitchy. It's complicated overall, i just hate the fact that they have to chech a smurfty tool
-
This is it

-
and the tool will get back to me. Then, i'll shoot a video of it
-
And over here, in Belgium, I've had the exact opposite experiences with both companies.
For my flawed Charge TTi (both sides had rulers from 8cm to 16cm, clearly a production error) they wanted me to pay shipping costs and on top of that 15 Euro administration fee (because I didn't buy the tool from a Belgian Leatherman dealer). So I just ended up keeping my flawed Charge TTi as a gimmick (Leatherman U.S.A. did send me a T-shirt and some stickers after I contacted them about the Belgian distributor's "administration fee".)
While Victorinox exchanged my son's "my first SAK" with a new one, no questions asked, no costs (did have to wait 4 weeks for it to arrive, but that was the least of my worries).
Different countries = different distributors = different rules...
-
Nope. Same country different products, rules whateva
-
@Top-Gear-24 said:
Last time I checked you and I don't live in the same country...But hey, I see this is not a topic to post your own experiences with warranty from certain brands, my mistake :-[.
Best of luck with your repairs/replacements
.Correct. This is not the place to post your experiences with warranty repairs and replacements - and CERTAINLY not the place to comment on the economic or legal reasons for different policies and experiences even within the same country at different points in time.
I too was sorely mistaken. -
I had a most excellent experience with Gerber customer service here in the US; they replaced a busted Mr Pinchy with an MP600 blunt nose.
My sole experience with Leatherman customer service is documented here, if it interests anyone;
/topic/61956
-
First of all, sorry. My english is clearly not good enough. And my responses are late. Second; I have no issues with Leatherman and since nobody has a Surge for sale, i decided to buy a new one. Third. With Victorinox, the things are... simple. I'm not buying again. Because of their so called warranty. In order to be as accurate as possible, i took a look at all the tools, 1 by 1 and made an analysis on what and for how long i've used them.
Pliers: made a total of 6 cuts. From thiner cables to some fater/wider ones. It cut them all without me feeling the need to apply an excesive force. Let's make it a double, 12 cuts.
Cross-driver: i've used it on 4-5 screws. It worked, but it has little bends. Let's make it a double, 10 screws.
The scissors: some paper, some paracord and some cardboard. No issues, except the jaws are on the tiny side.
The blade: on a tomato and on some cord. I don't know... 20 cuts?! Let's double it. 40.
Woodsaw: on soft wood, i've cut a 2Γ4cm piece. Let's make it a double, 2 pieces. Of hardwood.
Metalsaw: i've cut around 2mm on an forged iron fence in order to see if it cuts.
And that was it.
For that, i have to send it in?! For the issues i mentioned in my first post!? Victorinox is no longer an option for me. Can't rely on that company and on their "lifetime" guarantee. I'll send the tool in, i'll get it back (if repair costs will apply i don't care) and i'll give it away. The tool per se and the customer care are not by far what i expect. Some other Vic products are going away also. Going to keep just 2. I really don't want that whole hassle again for... why the heck!? Thank you for your patience and sorry that i couldn't actually get my intended message
-
And btw, a screwdriver on the new surge snapped today. That, i don't consider a warranty case. I just reshaped it. On other 3 lm tools i'll drop the warranty and i'll change some stuff. It will leave marks on, so bye, bye warranty. And i don't care. I just hate Victorinox point of view, overall handling of my issue and so on. Vent it away, finished now!



-
Oh, I'm very late to this party.
A producer has every right to check a faulty tool before deciding if it's a warranty case or not.
The written description and/or some pictures never create a full image.
I see Victorinox offered the worst case scenario costs in case it wouldn't be a warranty fix.
The fact that you can send it in through your country's importer for free is ruined because your importer is only sending in tools once a year. How is that Victorinox' fault? Also, the delivery truck drives both ways, which is why sending in a tool through a retailer is free.
Sounds to me your local importer just doesn't like sending in tools, which is why they whimmed you off. Leatherman allows them to switch a faulty tool over. Fast and easy, no paperwork.I'm certain Victorinox would have admitted their wrong and you would have gotten your Swisstool back by now for a measly β¬4 postage costs.
Instead, you've been complaining about a warranty issue you never decided to send in. You've bashed a service you never even used because of "the possible outcome"
To top it off, if you address the people at your importer and Victorinox the same way you address my fellow forum members, I'm not amazed that some doors are being closed in front of you.
Spoiler:
A fellow countryman of me bought a Spirit S BO from me. The serrated blade was snapped off, and he knew that so he got it cheap.
Handed in at a local store, picked up 3 months later for β¬10, completely repaired, as all tools were checked/replaced when needed. And that wasn't even a warranty case.
-

I mean...

-
Did you buy this tool new and how long after purchase did you find problems with it.
Here in the uk I donβt know for how long but if still new your contract would have been with the retailer and they should have replaced It.
Unless they feel you had abused the tool and even then I think they would refund you and politely tell you to take your custom elsewhere.
-
I'm also late so I'll keep it simple.
Sorry for the frustrations. Bummer your new LM snapped. I've seen that particular implement snap like that and yes its an easy fix.Seems the distributor is being a pain. I paid shipping to Victorninox and also a $10 hold on a card. They never used the $10. I sent in my tool directly to USA Vic. It was a while ( month? ) before they sent a new tool back with very little contact from them. They also sent the broken tool back.
I've sent a few tools to LM with little contact and about the same return time ( month ). They keep the broken tool and sent me a tool. I don't think it was new tho?
It seems as tho you've made your mind up about Vic and thats your decision. I am sorry for the frustrations.
I currently have a Swisstool with broken blade, my fault. I wont send in solely because I can get by without getting that blade.
Again I'm sorry to hear of your frustrations.
-
Well, because i seem to get the fault, and for some of the people, the vic fanboys, especially: yesterday and today i received from vic and from their distributor other appologies and so on. Costs for sending the tool in, were 19β¬. That's around how much of the tool price? So, i paid in the end a higher price. When somebody wants to be a distributor for a company/brand, they have to follow some rules. Almost like in a franchise. Almost. Yeah, it is vic's fault. Their rules. And... although i sent the tool to vic, with other appologies vic told me they will not send the tool back to me. They did repair it and they will send it to the distributor. After that, the dealer will send it to me. Funny, huh?! Apparently only the swiss banks protect their customers data. I had warranty issues with another swiss company, recaro. Well, it was handled entirely different. And for this specific product, i'm in contact with vic since March! Confirmed by them. Oh, and the tool was sent 2 months ago. How is this ok?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login