3D Printer Blog
-
Yes, both machines with the same motherboard are the same speed.
Ender 3X.
<a href="https://flic.kr/p/2jp6znb" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50144481576_5cca95662c_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8761A by Chako, on Flickr
Ender 3 Pro.
<a href="https://flic.kr/p/2jp3Nm5" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50143939908_83a5e1a087_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8762A by Chako, on Flickr
I have noticed that the Ender 3 Pro tends to lay a rougher first few layers, and there is a bit of stringing evident. Not sure if it is the PLA filament or something else. Not much difference though.
-
All it now needs is some string of a suitable size.
<a href="https://flic.kr/p/2jp75KG" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50144580438_2a83efae80_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8763A by Chako, on Flickr
-
Trebuchet!!! :ahhh
-
Today came another BigTreeTech TFT35 e3 V3.0 LCD screen. It was a quick swap with the original screen, and now it is working. Noticed that the fonts and display was way different to my other machine. I noticed that there was an update for the LCD screen off of BigTreeTech Github website. After reading the instructions carefully, I wiped a micro SD card and downloaded the proper .bin file. Now here is where things got weird. The instructions also stated I should also download the right folder titled "TFT35" which contained two sub folders, one for bmp icons, and another for fonts. I couldn't for the life of me figure out how to simply copy and past these folders to my micro SD card though. I finally figured that I had to create the same folders and manually open each and every freaking bmp icons, download them manually, and drag and drop them into the right folder. Had to do the same for the fonts. That was fun...and I have to wonder why I couldn't simply download the whole folder in one big swoop. 20 minutes later, I was ready to re-boot the printer with the .bin file and folder...and it worked. I now have similar LCD menues on both the PRO and the 3X (which needed this firmware upgrade).
After it did the firmware update, it also downloaded all those bmp icons and fonts.
<a href="https://flic.kr/p/2jqugj6" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50160224917_786871a935_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8785A by Chako, on Flickr
The old interface was blue. The newest update is a lot more colourful.
<a href="https://flic.kr/p/2jqt1f4" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50159979111_d3f8caf99b_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8790A by Chako, on Flickr
Now both are updated to the same LCD specs.
<a href="https://flic.kr/p/2jqt16m" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50159978606_a7afacf1b9_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8794A by Chako, on Flickr
-
hmmm...
Both Ender 3s now have the same firmware but slightly different menus.

I tried updating the Pro to the most recent and it will not update. I bet because it notices that the SD card firmware version is the same as the one already installed, so it will not do the update. There shows a month difference in the dates however, and I gather there was some updates in that months time to reflect the slightly different menu options. Nothing too serious however. At least there is no difference in the classic mode. The slight differences only show up on the touch screen side.
Testing both printers out now with a 7 hour bowl print.
-
<a href="https://flic.kr/p/2jqChfE" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50161788978_58540b0590_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8839A by Chako, on Flickr
-
Just finished. I do not have much of the red PLA left on the spool.
<a href="https://flic.kr/p/2jqMKNb" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50163637642_f36a977c83_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8847A by Chako, on Flickr
-
The Ender 3 Pro comes with a magnetic build plate that I didn't much care for. I tried it once, and quickly placed a glass plate on top of the glued magnetic mat that covers the heated aluminium bed. I have found that the glass build plate glues itself to this lower magnetic sheet something fierce however. Today, I struggled to separate the glass from the base, more so than in removing the printed bowl from the glass plate. I got fed up with the situation and started to peel that glued magnetic surface. It took some time and patience...
<a href="https://flic.kr/p/2jqJRTz" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50163072803_332dbbf3f2_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8848A by Chako, on Flickr
Now there should be no more issues of the glass plate gluing itself to that magnetic under-layer.
<a href="https://flic.kr/p/2jqJRNe" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50163072493_ee5f58973b_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8850A by Chako, on Flickr
-
Received my 5 promised nozzles that should have came with the first Ender 3X. It only took several months.
-
Update time. I did finally receive my upgrade metal bed adjustment knobs about a month ago. I have not installed them yet but will soon do that. With that in mind, after waiting 6 months or so for them, I ordered another set from a different seller to keep the Ender 3 Pro the same. I just hope these do not take half a year to get to me!
With that said, I have re-started printing. I got into 3D printing as something to keep me sane when COVID 19 struck. Since work started in September, I have not devoted any time to 3D printing, but now that I am on my holiday vacation...time to get back into the swing of things. During the months of inactivity, the black PLA broke off at the extruder on the Pro. In hindsight I should have removed the PLA from both printers and stored them properly. I did finish the red PLA in the Ender 3, and that came out great as a nice bowl. I then reloaded the black in the same machine and am currently printing my most ambitious print to date. So far 3/4 the way through a 23 hour print. Even though the black PLA broke on the other machine, and because of this, I did not have much expectations, it is working well so far.
So, back into printing stuff, and still slowly upgrading both machines.
-
Here is a photo of my longest print to date. I wanted to try this female figure to see if the printer was capable of something like this. Not doing a bad job. There is a bit of light stringing here and there, but that is to be expected on something like this. I imagine a light toothbrushing afterwards under some water will removed most of it. I am still in awe at how intricate you can print items. I think that will never get old with me.
<a href="https://flic.kr/p/2kmDQt1" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50773183238_c564f8856e_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20201229_001704A by Chako, on Flickr
Yikes, I only have 4 more photos on my free Flickr account. Guess I may have to start paying for that service soon.
-
@Chako said:
I am still in awe at how intricate you can print items.Then you should really try resin printing. Decent machines doesn't cost much these days, and as far as details go it is at different level.
I did some ABS printing recently. I haven't done that in years, and the filament was years old too, but they turned out ok. Many old filaments can get refreshed by a few hours to dry in an oven, but I didn't even have to bother with that.
-
The printers are cheap enough but I use my living room and am wary of the smell and toxicity of resin. I have no windows close by.
The print just finished 10 minutes ago. I let the glass plate cool of to room temperature and still could not remove it safely. I ran the plate under cold water and the model just poped off on it's own. I love the use of a glue stick on the smooth side of the glass plate.
-
I believe there are some resins around now which addresses those issues but I haven't tried any of them myself. My printers are well separated from living areas so not really much of a concern for me. (And I have gas masks if needed too).
I thought about trying some of those metal sintering filaments to make actual metal parts, but the pricing of those were well beyond curiosity or reason for my use. Hopefully they'll come down to useful levels at some point.
-
Metal sintering is definitely priced out of the range of most people.
-
@Chako said:
Metal sintering is definitely priced out of the range of most people.The big machines certainly are, but you can get filaments for normal filament printers that can then be sintered in normal furnaces. Detail levels, issues with shrinking and deforming and so one would be a challenge for sure, but the process might make certain parts and materials interesting. But with the prices for those filaments being what they are they don't make sense to me compared to say more detailed lost wax casting or just using metal printing services. Others might have more suitable use cases I assume.
I do like the development though - metal printing seem to become closer and more affordable every year.
-
If someone told me you could buy an awesome 3D printer for around 300 dollars, I would have laughed. The march of progress.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

:strip_icc()/pic6040737.jpg)