Thinking of getting into building a new PC system.
-
Way to Pablo your new build !

-
Oh smurf, I didn't think of it that way.

Here's a quick before/after of the CPU fan chopping:


And the reason for the chopping:

The grille of the PSU fan was laying on the CPU cooler. And the PSU mounting point was another few mm lower. :ahhhEven the big chopping wasn't enough, afterwards the PSU grille was placing the weight on the CPU cooler fan hub. So the CPU fan couldn't even spin. :ahhh Cue the 70°C IDLE temps.
So I had to remove the PSU grille, and now it awl fits, fan-to-fan with a few mm of clearance. Still practically silent...
-
Nice work.

-
Relocated the SSD, so I took the oportunity to take some pics.
https://imgur.com/a/2hlc0yW
An incredible nest of wires, but the 140mm fan is strong and silent! 8)As you can see, there is no grille on the PSU fan, and the cut-down CPU fan is blowing straight into it. A bit of a nasty hack, but should work ok.
Spoiler:

I didn't set out to make an anti-RGB batman PC, but that's what it ended up being.
I hope the lack of RGB doesn't decrease my fps too much. :ahhh -
Not sure. I hear that red makes things go faster.
-
Rgb is pretty and all but...
-

I am truly amazed that was a real SSD sold in shops. -
Wow. No issues with my XPG S40G Spectrix thus far. Surprised that LED is giving off so much heat. I knew there was a good reason to go with a Thermaltake P3 case.
-
So, I discovered that the CPU fan and PSU were counteracting each other.


94°C when stress testing was obviously... less than optimal. :ahhh
Same heatsink, new fan.
Just a generic 80mm fan (original was 92mm with 80mm mounting holes) blowing in the opposite direction, into the PSU.
74°C when stress testing now.
20°C lower just by having a fan that isn't fighting the PSU. -
I think I'm done... I replaced the CPU cooler fan again, this time with a nice quiet Noctua.
Then I underclocked the CPU to reduce heat. 6% less performance in exchange for 15 less degree Cs. :o
Then I modded the case to make it stand on its side, so it looks like a cute mini-tower instead of a microwave.Spoiler:

I think it looks nice, in a quiet sort of way. :)
-
Looks good. Love the ACME sticker.
-
Just got in my GPU card support. I had to order this from China and it took its merry time getting to me...but I think it was well worth it. I had a big black spot on my computer and this covers it nicely as well as support the GPU. I ordered the 4 pin 12V version off of Amazon. The seller had a lot of different images to select from...but I wanted something Ronin like. I gather it is from some anime show...but I do like the design. I have MSI Mystic Light controlling it right now, and it syncs with the motherboard LEDs cycling through the colour spectrum. I am happy with it.
<a href="https://flic.kr/p/2kssFDB" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50838906321_7d77a3f602_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20210115_134650A by Chako, on Flickr
-
Update time:
It happened with my Dierya 60% wireless RGB keyboard. I was playing a FPS game when my "A" key starting sticking. I pulled the key with the included key puller and made sure to clean everything out as much as I could, and realized afterwards it was the mechanical sensor that was at fault. I really liked the 60% keyboard size but found that some of the extra keys I needed to use was a bit esoteric in how I had to access those functions...the key I missed the most was the DEL key. I went back to Amazon and took a look at the other 60% keyboards and found a few that were called 10keyless. These featured the missing buttons of the 60% keyboards and also omitted the number pad. I found a nice Razer Huntsman Tournament TKL keyboard and decided to buy it before reading any reviews.
Well, after buying it, I then started to read the reviews and found out that these use the newer optical mechanical switches. Apparently they work by allowing a beam of light to pass through when the key is depressed. I also read that the keys are so sensitive that typos will be domain. Now that I got the keyboard in, I will say the typo thing is true. If I lightly rest a finger on a key, it will activate. I am not so bothered because my typing style always had my fingers hovering over the keys and not touching them until I need to press a key. Still, this keyboard will take some getting used to.
Happy to say it is very nice for gaming. The keys feel more premium than my older 60% keyboard. The LED is not as mesmerizing as the older Dierya keyboard was...but the keys do feature lighted keys which aren't as hard on the eyes...in other words, even though this keyboard is more mate, I actually prefer this.
I hope this keyboard will last longer than the older one. Being a Razer, I am sure it will do nicely.
Razer Huntsman Tournament keyboard on the top, Dierya keyboard on the bottom.
<a href="https://flic.kr/p/2kzfAto" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50915763036_8065a5373c_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20210206_140926A by Chako, on Flickr
-
The kid got to order his the other day,, all made from scratch total gaming system and NOT cheap!
JR -
Spill the beans. What did he get?

-
I have no idea when it comes to this, I’m old school, all I know is the storage space is suppose to be through the roof and it’s liquid cooled..
JR -
Liquid is the way to go.

-
Hoping to get parts from China within a few months.

(You know how shipping is like... ::) )
-
I hear you. I am still waiting on several packages from China from things I ordered back in December.

Yes, floppies and CDs are non-existent these days.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
