Gareth's Sword Collection.
-
@Chako said:
That makes sense. I tried putting a finger in my Cold Steel version and found it quite limiting and uncomfortable. I had always assumed you placed a finger (or 2) in there. Thanks for clearing that bit up for me.
No worries. If you were holding a rapier you'd hook your index finger through the ring and it would give a nicely balanced grip for a longer, heavier blade for both cut and thrust play. However for a light blade and point play the pinch grip gives much finer control.
-
@Gareth said:
No worries. If you were holding a rapier you'd hook your index finger through the ring and it would give a nicely balanced grip for a longer, heavier blade for both cut and thrust play. However for a light blade and point play the pinch grip gives much finer control.Hahaha.... first thing I thought, these people must have had skinny fingers, but that makes a lot of sense.
-
-
Now that I see it, it makes a lot of sense. It prevents the blade from twisting on you..as the handles on these type of swords tend on the skinny side.
-
@Etherealicer said:
How could you, she is a beauty
:D
-
@Chako said:
Now that I see it, it makes a lot of sense. It prevents the blade from twisting on you..as the handles on these type of swords tend on the skinny side.Exactly. It also does a very good job of replacing your index finger with a very pointy bit of steel and most of us can point at what we want to hit. :)
-
@Gareth said:
Bugger, I knew this would happen; I forgot one.
Lets rewind back to the later half of the 18th Century and look at the third of my smallswords. Over the century the trend was to smaller hilts and, most tellingly, the "finger rings". Interestingly these weren't intended for you to hook your finger through and hadn't been used that way since the days of the rapier. Shown below is the grip taught by every single smallsword fencing master, no matter the actual size of the rings. The hilt is made of gilt covered brass.
Different countries had broadly identifiable trends and schools of thought about fencing. So the Germans, Italians and French etc all had recognisable terminology and methods of fencing. The French school of thought in the second half of the C18th was for shorter and faster blades. Again we have some very nice chisel work on this triangular section blade.
Interesting the pommel positioning in the wrist. Is it intended? To provide more stability to the blade? I only thought of it as a counter-weight, to position the balance point of the sword.
-
@pfrsantos said:
Interesting the pommel positioning in the wrist. Is it intended? To provide more stability to the blade? I only thought of it as a counter-weight, to position the balance point of the sword.Yes you are right, the pommel does indeed add weight to the hilt to help balance the sword. This hold is particular to the smallsword and helps index the sword and point onto the end of you arm so the blade makes a nice straight line with your forearm. Push your arm out and the sword point will be directly in line. Stabbing your opponent becomes as easy as pointing at them. ;)
-
I will also add this is only one grip, there are quite a few others. This one is the position of sixte.
-
Really enjoying this thread !

-
@pfrsantos said:
I'm affraid to ask how you know so much about blades...:ahhh :ahhh :ahhh :ahhh
It's a secret. ;)
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)

-
So, our brief trip back to the C18th aside, lets look at my next military sidearm. Second to the sabre-briquet in terms of popularity has to be the "gladius" hilt (as it's known to collectors and museums) though it truth it's something more akin to the Greek xiphos to my eye. Driven by the neoclassical craze of the time this hilt style seems to have begun, once again, in France with the 1816 Artillery sword known informally as the coupe-chou (cabbage cutter). This hilt was married to many different blade lengths and styles; double edged, single edged and saw back depending on which country was buying it and for who.
This particular sword seems to have been commissioned for the British Land Transport Corps in 1855. I say "seems" as there are at least two quite different swords that get that credit and there is a a whole lot of doubt that the LTC were ever issued any swords at all. Though that's not to say there weren't swords commissioned for them that remained un-issued. Whatever it's true origin this is a notably large and weighty version.


-
- I like that one!
-
@Gareth said:
Second to the sabre-briquet in terms of popularity has to be the "gladius" hilt (as it's known to collectors and museums) though it truth it's something more akin to the Greek xiphos to my eye.[...]Most people probably never heard of a Xiphos... and you know how the saying goes: "It is all Greek to me"
-
Thats a lovely one. Its interesting to think men carried swords and how gruesome fights could be with them. I was reading recently about how in Western marriage tradition the bride stands on the left of her groom. Guess he wanted access to his side arm should be need it. Not sure how true this is but it seems to be a prevalent belief.
-
@Aloha said:
Thats a lovely one. Its interesting to think men carried swords and how gruesome fights could be with them. I was reading recently about how in Western marriage tradition the bride stands on the left of her groom. Guess he wanted access to his side arm should be need it. Not sure how true this is but it seems to be a prevalent belief.No, he just wanted her close to his heart!

-
@pfrsantos said:
No, he just wanted her close to his heart!

The heart is in the middle, you know...
-
OK, enough of the swords for the troops, lets get back to the officers. Cast your mind back to the 1822 "gothic" hilted sabre we looked at with it's rather unusual pipeback blade. If you've been paying attention you might remember I mentioned that the pipeback wasn't a huge success. Well, in 1845 a design by Henry Wilkinson was accepted as the new standard, though there would have been no expectation of existing sabres to be updated. Gone is the pipeback and a single, wide fuller with a strong spearpoint blade was the new norm. This resulted in a far stiffer blade and was widely seen as a great improvement. We also see the use of the brass "proof" slug as a supposed mark of tested quality.
The next thing to look at on this sabre is the hilt. In 1827 the rifle regiments decided that they wanted something exclusive again and opted for a steel, rather than brass, hilt. Also they went with the tied bugle horn badge of the light infantry rather than the royal cypher. All a bit egotistical if you ask me. :D The service of the 1827 hilt lasts right up to today. Collectors will often combine the date of the blade along with the style of hilt to help identify the rough age of this pattern that has been around for nearly two centuries. So; 1827, 1827/45, or 1827/92. Going with this naming system we could call my sabre here an 1827/45.
Now, as you'll see from my photos, this is not a very fine example. It's low on detail on the hilt compared to many, it's been painted at some point in it's life and the shagreen grip is all but gone. :-\ Given these are pretty common sabres why did I buy this one? Well I bought it because it, very faintly, has the title "Leith Volunteer" etched on it's blade. Leith is my home town and I couldn't miss out on a bit of local history. :) The Volunteer part of this I've done a little reading about but in no way do I feel qualified to say much about it. Further reading on this subject is definitely recommended though. https://en.wikipedia.org/wiki/Volunteer_Force https://en.wikipedia.org/wiki/5th_Battalion,_Royal_Scots



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login