Vintage SAK Owners Club
-
@jnoxyd said:
Thanks Kamakiri for the answer!
Indeed, I also do not see much sense in producing a cheap line using 50x-60x technologies. Scissors in the Elinox series look terrible without usual manual polishing, non-oxidized liners have cracks (to be honest, even in the main series they are a problem), the absence of a file on the phillips hardly gives a strong price reduction, etc. Interestingly, they did not abandon the idea of inexpensive series and released the Economy line without obvious degradation (hot stamping instead of a metal emblem, no tools in the scales, a corkscrew without a groove, what else?).
And yes, Huntsman Economy exists ;). What other 3-4 lines Economy knives do you have?


Lol. Pulled one of those out too.
I think time for the tumble polish is reduced for most parts. Or I’m just seeing the out of tolerance QC culls.
I have these as c. ‘79


-
Was busy taking this apart last night. Gotta love 70+ year old grime!
.

-
I'd say!
-
@jnoxyd said:
What was a reason? Every parts look good [emoji848]Parts have some damage and wear. Most of it could be ‘fixed’ to some degree for functionality...and also a bit for cosmetics. At the very least these aspects can be improved without taking it apart.
I didn’t make a list when I decided to take this one apart, because I’m still not 100% certain about restoring it. Some of the pros for taking it apart:
Parts. I bought it for parts, which aren’t that great. Decent shape for some but all need a fair amount of work to look ‘good’.
Already missing original shackle. So less concern about parting out an incomplete knife.
Cleaning. Hardly a reason, but I don’t like the ‘spa’ treatment...and never do that with vintage knives.
Practice. Before I do some other crab claw knives that need disassembly without scale damage, I thought it better to do one with lower value.
And the big one. Smashed liner ends. These could be improved a bit assembled, but I wanted to try an ‘agressive’ or intensive restoration on them. Now I know I’ll never make the look new, but the intent is to make them look far less used and abused. See pics below.The plate width of the outer liners essentially doubled. ~0.7mm -> 1.35mm and 1.40mm. Sure, I could have ‘fixed’ it with a file, but I got to the last pic with zero material removed.
I hope that explains some of my crazy!
.




-
Yes it was worth doing. Hope you are going to use nickel silver rods for rivets [emoji6]
-
@jnoxyd said:
Yes it was worth doing. Hope you are going to use nickel silver rods for rivets [emoji6]
Of course! And for the shackle too.I turn down the pins myself to 2.25mm from 3/32” stock ~2.37mm. I can re-use the long pin and 4th pin since they came out without material removal.
I’m going to try for the earlier style of shackle lugs that went into the early crab claws. Probably not the right style, but I haven’t made of that type before. Those usually go with the scales that have the nail relief for the corkscrew. This one is later than that and should probably have the ‘flatter’ style lug.

-
Great plan! Let us see what happens, please.
-
Kamakiri, looking forward to seeing how this project goes!

-
Here are some of my latest finds (I've already shown the Richartz Solingen from Germany on the far right in another thread)

- Victorinox 234 Bgl. (Spartan).
I suppose it's from late 40's early 50's...





- Wenger ? (Commander)
Measuring 82 mm, but I can't find not much more information to date it. Apparents rivets and can opener type claw "army style"



- Unknown brand.
Measuring also 82mm, really nice and every blades are closing like a gator ;)




I let the gurus of vintage sak telling more... ;)

- Victorinox 234 Bgl. (Spartan).
-
Looks good [emoji106]
-
@jnoxyd said:
The main problem for me is getting proper length after hammering the ends of rod [emoji38]No kidding. I use an offset from the pin center or ‘eye’ for control. If forming for widening also lengthens too much, then I gotta quickly figure out if there’s enough width or material toward the center. Always an issue with the second end.
I’ve tried 2.0mm wire, but I can’t seem to make it work...yet. Would save a lot of time.
-
You are right, 2.0mm rods fit better for both bail versions (pre and post 1957). What is the problem with them? Here’s post 1957 version hand made bail together with original one

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


