ZapWizard's Leatherman Free P4 Mods
-
So a person asked on YouTube for a smaller tool that would hold #25 blades. I checked, and the #25 and #22 blades installed into either the T2 or T4 look like they were meant to be.


-
That is so very awesome, Zap :o

One of those scapel holders is just what a person needs for bladeless areas

-

Also for whacking on a disposable instead of chipping/snapping on the OE blade; or if you're not too keen on resharpening!

-
Recently ordered the scalpel holder. I figured I almost never use the scissors. I find that I can use a blade for almost everyting I would use the scissors for. I will use the scalpel a lot more. Between the flat bit holder, the T-shank holder and now the scalpel holder, I have a Free Zapwizard multi tool.
-
I purchased the P4 some time back. I bought and added the thumb assist blade openers to the main and serrated blades. Before I added the thumb assists, I first moved the serrated blade to a position, diagonal to the main blade, as is the case with my Charge Ti and my Wave. It seems to me, that is the more ergonomic location for the serrated blade because a simple rotation in the right hand of 180 degrees puts you into a position to open either the main blade or the serrated blade.
One thing I noted about the P4 was that the back side of the main blade protrudes slightly beyond the side of the tool, wherein it is enclosed, similar to the Charge and the Wave, which makes access to the thumb opening aperture more easier and really obviates the necessity of adding a thumb assist opener to the main blade. At first I was going to add the thumb assist opener to the serrated blade only but decided to go ahead and add it to the main blade as well, (it does make the main blade more easy to open but not appreciably so). This situation made me wonder why Leatherman didn't make the P4 serrated blade the same as the Charge and Wave blades, with the protrusion of the blade back side beyond the side of the tool as the main blade is, so that the thumb opening aperture was easily accessible on both blades?.
I also purchased the flat bit driver from Shapeways, Zapwizard's outfit or the company marketing his mods, because I really wanted to be able to use the Leatherman bits and I felt the loss of the Phillips was not a big deal because I inserted the combination Flat Screwdriver/Phillips No.2 bit in the bit driver. Don't remember what the other tool that was lost from the P4 was, (because of adding the bit driver), but it wasn't a big deal because I never used it.
But the main reason I added this post was because I wanted to know if the long Leatherman flat bit, which combines the Flat Screwdriver with the Phillips No. 2, would fold into the tool and clear the pliers so that it folded up completely. Does anyone know? I guess I could shorten the Flat Screw driver end of the long bit, to make a longer bit work. Such a mod would make the default bit in the bit driver, more useful because it would have greater reach.
See attached pic.
![20200922_151339[1].jpg](/assets/uploads/_imported_attachments/migrated/488570_20200922_151339%5B1%5D.jpg)
-
@Slygrin, and brab thanks for your orders.

They made one only blade protrude so you can tell which blade your opening without looking, one of the issues with the wave is pulling out, opening the blade, only to look down and realize it was the wrong blade (since it is 180 degrees symmetrical)
Just to be clear, Shapeways is the manufacturer, they produce and drop ship the parts that I (and lots of other folks) design. They don't own my designs, or market them beyond giving me a store front to list my goods.
I assume your talking about the Leatherman Mut bit? It looks to be twice as long as the standard bit. It would hit the pliers when folded up.
Leatherman does make a short combination bit kit here: https://www.leatherman.com/1-2-phillips-3-16-flat-screwdriver-bits-624.html
In other news:
I just purchased a Raptor, a Signal and a Skeletool with the intent of designing accessories. I get request for Thumb tabs for the signal and skeletool all the time, so those will be first, for the raptor I want to design a much slicker holster than the very bulky model that it comes with. -
The user aerodrew808a on YouTube put this idea in my head 11 months ago. Yesterday I got the itch to go ahead and design it.
It won't be cheap (nothing in the FREE series seems to be) as the vials are $10 a piece + UV adhesive. So to that end I rendered out all 72 possible color combinations so folks can visually decide on what combination they may want.
Also, will have a 2nd version for use with glow powder / epoxy.I am partial to the orange/green combination.

I won't be prototyping this for a bit, working on lot of other stuff at the same time.
-
:o That is pretty cool looking, Zap 8)

-

Very cool! Do you have plans to make them for the Surge? (Not sure if these are interchangeable with the other non-Free tools)
-
I will do the FREE series first, then look at making them for the Surge/Wave. No sense in investing money into prototyping all of them at once.
-
I finally got the scalpel holder installed. I ordered the wrong one to begin with. Got the right one and installed it today.I wasn't sure I really needed it, but after several trips out to the garage for my X-acto blade kit, I figured it needed to be in my P4. It's going to come in real handy. Now, Mr. ZapWizard, please stop making new stuff for the P4. I'm running out of things to replace!

-
Nice P4 you got there. I am also running out of things to replace. I got the tritium vial prototypes in, and didn't have any blades even left in my P4 to install them into. (I am going to put the main blade back in)
-
Sweet modding, Slygrin

-
Is it OK to post up a scalpel holder for sale on this site? Like I said in my earlier post, I ordered the wrong one to begin with. I have a "medium" available. I don't want to break any rules.
-
Just an FYI. The Scalpel holder is working great. Since I replaced the scissors for it, I've used it probably10x more than I have scissors in the last year. 2nd best mod i've done, I do use the bit holder much more though.
-
So someone on YouTube pointed out the new Havalon #70A blades which don't have the sharp tip. I have ordered these since the scalpel holder can tilt out and cause the point to be exposed.
https://www.amazon.com/gp/product/B011730QDY/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D