Knot in October GAW
-
@Nix said:
I've been playing around with RF's knot....
My bight's tail was a bit long, and I thought there could be the potential to get the tail of the bight stuck in the bight....forming a non-slip knot..... :o
(Knot likely, but a possibility.)
So, like with other knots, I secured the tail to the loop with an extra overhand knot:

Which could then get snugged down to make a neater overall looking knot:

I don't think this interferes with the breakaway function:

With one good yank, it popped apart:


Nice one

I really need to work on my knot game
Sent fra min FRD-L09 via Tapatalk
-
You've come to the right place then. There have been some really good knots tied already. I'm sure the are more to come that will be equally awesome.
If I can come away with muscle memory of the ones I submitted and 1 or 2 new ones I'll be so happy.
-
@Aloha said:
You've come to the right place then. There have been some really good knots tied already. I'm sure the are more to come that will be equally awesome.If I can come away with muscle memory of the ones I submitted and 1 or 2 new ones I'll be so happy.
Some very impressive knots
great to have them collected here to learn from 
Sent fra min FRD-L09 via Tapatalk
-
Here goes my 2nd entry.
One would think I entered more often as I seem to have a variation of a knot or tying it on almost every knot shown.
Sorry about that. 
Now, I mentioned the figure 8 knot many times over already here in the thread as it's the most important and reliable knot I know and use. And to my great astonishment no one has yet used it. :o There are many variations and iterations of it, and I could probably post all my five entries with just those, but we'll see what others have on their minds. ;)
This entry is actually two knots, as it combines the figure 8 with another woven in figure 8. As I used a knot for connecting two ropes the first time around, I decided to continue with the tradition. :D
A double fisherman can be used to connect two ropes of same or different diameters safely. The figure 8 can't. It's only appropriate for connecting two ropes of same diameters. So 10mm rope to 10mm rope and so on. If you use different diameter ropes, the thinner one could slip out, and that's BIG safety hazard. Now, why would one use it then? Cause you can if you make a figure 8 on your first rope, connect the two ropes and also add an attachment point to safely pass a knot on the rope.

So here goes...
Take a bite of a rope and wrap it around itself as shown in the pictures, one wrap around makes a figure 6, also a good and simple knot, two wraps make a figure 8, and if you'd continue passed that and add another wrap before you passed the bite through the hole, you'd make a figure 9. but that's for a knoter knot story ;)
Pull it tight and you have yourself a very safe figure 8. The working end of the rope should always be on the top of your knot so you tighten it even more when under load. And it is important to make it look nice, so no overlaps and crossed threads, every overlap you make reduces the load baring capabilities of a knot by about 25%. See how pretty the knot can look like?
Now, to connect the second rope, you loosen the figure 8 a bit, and pass the tail of the second rope through the two strands, follow the two strands all the way till you've repeated all the wraps around the knot. Tighten it and you have yourself a nice and useful knot.





-
@enki_ck said:
Here goes my 2nd entry.One would think I entered more often as I seem to have a variation of a knot or tying it on almost every knot shown.
Sorry about that. 
Now, I mentioned the figure 8 knot many times over already here in the thread as it's the most important and reliable knot I know and use. And to my great astonishment no one has yet used it. :o There are many variations and iterations of it, and I could probably post all my five entries with just those, but we'll see what others have on their minds. ;)
I love the discussions, so please continue to add your insights!
I, too, am surprised the universally loved figure 8 knots have not been seen before now! The Figure 8 series is hugely useful. Everyone should know and love the figure eight: simple and strong!
I can only give you credit for one knot at a time....so let's go with the fabulous Figure 8 on a bight that you tied. I've also heard the it's important to keep the working end up on the top of the knot.
However...I once saw some testing that suggested this is not as critical as we have supposed. Still...I tie it the way you do!

-
If I remember my stats correctly, the difference between the top and bottom position of the load bearing line is 10%, so not a big deal, but the correct one is easier to untie once it has been under load.
-
Oh, and I know I get one entry, I just wanted to share something more elaborate than just a figure 8 so I connected two knots in one entry

And I really should go get my red auxiliary rope from my gear bag, these two are too similar for contrast

-
My second knot entry is the Double Constrictor knot.

1)Start with the standing end dangling in front of the object you want to tie the double constrictor knot around
2)Wrap the working end over and around the object
Wrap the working end over and around the object again, this time being sure to cross over the standing end
3) Wrap the working end around again, over the standing end and next to the previous wrap
4) As the working end is brought around go over the dangling standing end then under the wraps going between the original wrap and the two that crossed over the standing end
5) Pull tight on both standing and working endIn some ways this knot is like a hitch, but more secure and not meant to be untied. It can also be used
- like a clamp to hold over lapping objects together where at least one is soft or pliable, like a hose onto a pipe
- If a line gets cut or parts, can use a constrictor knot at end to help prevent fraying
- if a hose breaks and need to secure end to stop or minimize leaking. The effectiveness would depend on pressure and pliability of hose.
- lanyard or tie down for an item that does not have a hole to run a line thru, such as pen, water bottle, flashlight, etc.
The biggest downsides to the double constrictor knot are
- that it can become so tight that it cannot be untied and needs to be cut
- if wrapped around something soft or pliable, it can crush the item as it tightens, for instance two hoses that you want to maintain flow through
Here is the double constrictor knot before tightening around a water bottle

Here is it after tightening and swinging the full bottle around

Here is it used as part of a lanyard for a flashlight

Here is the double constrictor knot tightened around a can. The can was crushed simply by pulling the knot tight

-
:ahhh

I use the single Constrictor knot a good bit: most often to secure a hank of rope and keep it from unraveling. You've inspired me to try the Double Constrictor now!
I often tie my single Constrictor with slippery bight to make untying a bit easier. (As you said, these things can be cinched down pretty tight!)
As I type, here is a hanked line, ready for practice knots, secured with a 'slippery constrictor':

Ashley has a neat cartoon of a technique to really cinch down a constrictor (for making a hose clamp repair in this instance):

The Constrictor is tied with long tails, these are attached to dowels. Now pressure can be applied using the force of legs, back and arms! I bet that don't come untied easily......
Thanks for a great knot!

-
Inspired by Sos24 and Ashley, I tried tying the Double Constrictor using a bight around a dowel:

The bight let me stick my foot in the loop and then pull from the other side with my arms. Man, oh man! This got tight!
It was hard to slide it off the dowel.
I tried the same knot using just the single line, not doubled up. I put a Bowline in one tail for my foot and pulled on the other tail with my arms.
I think this version got even tighter!
As I pulled, I noticed the cols of line sliding past each other, tightening like a Boa Constrictor on its prey. When the line was doubled over, I don't think it could slip on itsself quite as well, and so may not have gotten quite as tight as the single line version.
The Double Constrictor is definitely a keeper!

-
Great knots. I was hoping someone would do the figure 8. I love the beauty of this knot. The constrictor knot is one I also am glad to see. I need to memorize this one for sure.
-
Great contributions everyone - Did not know the double constrictor
Isn't it a clove hitch with an extra turn?
And even more secure by the looks of it !! -
@Huntsman said:
Great contributions everyone - Did not know the double constrictorIsn't it a clove hitch with an extra turn?
And even more secure by the looks of it !!I can see why you would say that, because they are very similar, but there is another key difference.
In the clove hitch the two ends are side-by-side, but in the constrictor knots the ends overlap a d apply pressure to each other.
Maybe the best way is visual. Here is a picture of the clove hitch, single constrictor and double constrictor (L->R) before tightening.

You can see with the constrictor knots, each end is overlapped by the other end where it exits/enters the knot. Because of these overlaps a pull on either end tightens the knot but also presses the opposite end down into the object. The pressure on the opposite end means makes it highly unlikely that the knot will loosen, especially if either end is under tension.
I hope this makes sense, because despite understanding it in my head, I’m not sure I explained it well.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



