Skary Skeletool October Challenge?
-
Hello day 9.
Bit of a fiddly job making a speSmurfpillst battery charger from a usb phone charger cable. The Skele to do the roughcuts and a very underated tool the Squirt E4 to do the fine work. 2LMs for one job must be happy days .

-
Thanks Nix
and great pic to get Day 9 going, Paul

-
Day 9:
More parts


Sent fra min FRD-L09 via Tapatalk
-
Day 9

A funky use, I built a stand for displaying my Lego Star Wars characters, and often times lego parts may fall thru the gap of the 'stand' and it is hard to retrieve them without a long tweezer. Skeley rised for the occasion and was able to complete the rescue mission.
-
@Antti Lammi said:
Day 8 of 30Today sharpened my Skeletool blade with wetsandpapers. Blade wasnt awful dull but still needed sharpening.

Only Tools Matters
I think you and I have the exact same model/variation!
So far all the serration I have seen are on the left side of the blade(possibly why Sos24 like it so much, a left handed blade), I kinda wonder do they have it on the other side? I think with a very acute angle, they could be quite good for feather sticking.Already past the 1 week mark :ahhh Was laying a few brick today but not much of a job for the Skeley
:D
Time does fly, and good job from you!

@Sos24 said:
Day 8
Skeletool cut a couple dog chews in half.

That's one handsome Skeletool!

-
@Pauldmmwc said:
Hello day 9.
Bit of a fiddly job making a speSmurfpillst battery charger from a usb phone charger cable. The Skele to do the roughcuts and a very underated tool the Squirt E4 to do the fine work. 2LMs for one job must be happy days .
That's an curious photo, what purpose is that roll of concrete for?
:DMore parts

Sent fra min FRD-L09 via Tapatalk

-
@powernoodle said:
Cool, Chip. Its always fun to get a package in the mail and not know what is in it.Powernoodle Day 3*
*
Maybe when I run out of things to do, I'll go back through all of the Challenges and count the number of sunflower seed pics.*Nice red.

-
-

A funky use, I built a stand for displaying my Lego Star Wars characters, and often times lego parts may fall thru the gap of the 'stand' and it is hard to retrieve them without a long tweezer. Skeley rised for the occasion and was able to complete the rescue mission.
Cool pic

Sent fra min FRD-L09 via Tapatalk
-
Powernoodle Day 9
*
Thank you, Colonel Comis, for the MTO magnet!* -
@powernoodle said:
Powernoodle Day 9
*
Thank you, Colonel Comis, for the MTO magnet!*

-
<u>DAY 9
</u>
It was a work day today (again) so no carrying, apart from at home.However, I needed to dismantle my work magnifier (used for checking documents up close) so, bought it home.
I used the small Phillips bit to remove the tiny screws and check the insides, which were a bit grubby :-[
A quick clean and some new AAA batteries and all was well again

Also, checked for a CX date code but, no joy; was this ever resolved (I read some previous posts about this)



-
@comis said:
I think you and I have the exact same model/variation!
So far all the serration I have seen are on the left side of the blade(possibly why Sos24 like it so much, a left handed blade), I kinda wonder do they have it on the other side? I think with a very acute angle, they could be quite good for feather sticking.Time does fly, and good job from you!

That's one handsome Skeletool!

@ReamerPunch said:
That Skele is seriously pretty.
Thanks Reamer and comis. I really like the Topo.
Comis you are right about the serrations just being on one side. They are also aggressive which has its advantages for cutting but as Nix discovered can also be bad.
-
Day 9 of 30
Today cutted open zipties with blade. Also used pliers to bend nails.

Only Tools Matters
-
It is hard to believe we are almost a third of the way through this challenge. I haven’t had as much time as I usually do to follow and reply lately, so I feel a little bad. But now that I am having a little time to go through, I am liking the variety of uses and discussion, as well as the pics of course.
-
Day nine
Flat head Friday! Hope everyone’s havin a great Friday...


-
Day 9
my mum broke the glass from a bulb when trying to change it so i grabbed my skeley and a head torch to go over an fix it for her. also while there i used the large flat bit to prod the rubber seal back in place around the door of her washing machine.

-
Hi
Just a reply to Comis about the roll of concrete.
I am a concrete technologist by trade and often they need to drill holes in a wall or slab to allow cables etc to pass through. For larger diameter holes it is easier to drill a core than to drill big holes. That roll is such a core
I like to keep the cores as I can then see how my concrete mix has turned out and sometimes they are just pretty. Most of you will think it very sad that I find concrete pretty but hey it pays the bills and lets me buy more MTs.
That roll is a core from some floor somewhere and cannot remember why I have kept it.
They do come in handy though if you do not have a stand for your soldering iron and you do not want to burn the carpet or desk.
-
@Pauldmmwc said:
Hi
Just a reply to Comis about the roll of concrete.
I am a concrete technologist by trade and often they need to drill holes in a wall or slab to allow cables etc to pass through. For larger diameter holes it is easier to drill a core than to drill big holes. That roll is such a core
I like to keep the cores as I can then see how my concrete mix has turned out and sometimes they are just pretty. Most of you will think it very sad that I find concrete pretty but hey it pays the bills and lets me buy more MTs.
That roll is a core from some floor somewhere and cannot remember why I have kept it.
They do come in handy though if you do not have a stand for your soldering iron and you do not want to burn the carpet or desk.
Im weird and love the look of concrete, next year hopefully I want to get a new path poured down and around my garden. I also love the look of brutalist architecture.
-
Very nice pics again today

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
