What did you use your Sak on today?
-
@munsonhsr said:
Happy Birthday, and a great Dremel set-up!! Envious..Thanks a lot [emoji3060]
Here I come again [emoji23]
Our iron got all dirty in months after purchase for some reason and I started googling the possibilities of bringing it back to normal. To my huge surprise I came across a video that shows wiping a hot iron with... paracetamol pills [emoji15] I kept looking and found lots of similar statements, so went with it using Work Champ pliers to hold the pill

Believe it or not - it works magic [emoji3316]

Though keep in mind that my head started aching so I opened the window and opened a respirator to block the fumes coming from melt paracetamol with a can opener on a Work Champ

-
@alexanderre said:
Thanks a lot [emoji3060]Here I come again [emoji23]
Our iron got all dirty in months after purchase for some reason and I started googling the possibilities of bringing it back to normal. To my huge surprise I came across a video that shows wiping a hot iron with... paracetamol pills [emoji15] I kept looking and found lots of similar statements, so went with it using Work Champ pliers to hold the pill

Believe it or not - it works magic [emoji3316]

Though keep in mind that my head started aching so I opened the window and opened a respirator to block the fumes coming from melt paracetamol with a can opener on a Work Champ

Happy Birthday!
Nice job on the iron.

Used my Exploer to pull some staples this morning. Whoopie....LOL
Sent from my SM-T387V using Tapatalk
-
[emoji1689]
Sent from my SM-G960F using Tapatalk


-
@alexanderre said:
Well done, bud, though frankly speaking it hurts to watch a little [emoji23]Screw was little loose,so it had to be tightened ,and Vic was only tool in pocket[emoji1689]
Sent from my SM-G960F using Tapatalk
-
@marko14 said:
Screw was little loose,so it had to be tightened ,and Vic was only tool in pocket[emoji1689]Sent from my SM-G960F using Tapatalk

Not saying that the Vic isn't up to the job... It's a matter of which Vic is up to which job, without compromising the structural integrity of said Vic.I used to use the chisel on the back of the Champ until I put micro screwdrivers in all of my corkscrews.
-
@ElevenBlade said:

Not saying that the Vic isn't up to the job... It's a matter of which Vic is up to which job, without compromising the structural integrity of said Vic.I used to use the chisel on the back of the Champ until I put micro screwdrivers in all of my corkscrews.
To be honest i don't think about integrity of any tool that i have,i bought that tool it didn't bought me...
Sent from my SM-G960F using Tapatalk
-
Sent from my SM-G960F using Tapatalk
AAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHH......... :ahhh
You used the tip of the blade as a screwdriver??? :o

That's a capital offense for any SAK user/lover

Could have use the bottom tip of the can opener, or the tip of the tweezers, it would had worked just as good if not better for that.
That's the main reason why i don't let anyone borrow my SAK's...

@marko14 said:
To be honest i don't think about integrity of any tool that i have**,i bought that tool it didn't bought me...**Sent from my SM-G960F using Tapatalk
Well, there is something called "respecting your tools", meaning not abusing them... unless it's an emergency situation and you have to....
-
SAK enthusiasts everywhere

-
@MacGyver said:
AAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHH......... :ahhhYou used the tip of the blade as a screwdriver??? :o

That's a capital offense for any SAK user/lover

Could have use the bottom tip of the can opener, or the tip of the tweezers, it would had worked just as good if not better for that.
That's the main reason why i don't let anyone borrow my SAK's...

Well, there is something called "respecting your tools", meaning not abusing them... unless it's an emergency situation and you have to....
I will decide what is best use and job for my tool,thank you...cheers
Sent from my SM-G960F using Tapatalk
-
-

Forester did some firewood ;)
What it really did was to cut some rope and large nylon sacks for trash fire. The winter is coming.Sent from my iPhone using Tapatalk
-
@old Lefty said:

Forester did some firewood ;)
What it really did was to cut some rope and large nylon sacks for trash fire. The winter is coming.Sent from my iPhone using Tapatalk
Always good to see the Forrester M Grip put to use. I can spend hours fussing over 2-3 layer 111mm SAKs. At that weight class, the details of scales, and thumb holes, and back tools make a whole lot more difference
-
@marko14 said:
I will decide what is best use and job for my tool,thank you...cheersSent from my SM-G960F using Tapatalk
Mate, let's get two things straight right now:
1- No need to be rude ou unpleasant. I was being (or trying to be) humorous about it.
2- I'm entitled to my opinion (and the others too). If you don't want people to comment on your post, it's simple... Don't post! -
@MacGyver said:
Mate, let's get two things straight right now:1- No need to be rude ou unpleasant. I was being (or trying to be) humorous about it.
2- I'm entitled to my opinion (and the others too). If you don't want people to comment on your post, it's simple... Don't post!It is wery simple you have your opinion, i have mine,i wasn't rude,if you find it offensive that's not my problem,let's agree that we disagree, cheers.
Sent from my SM-G960F using Tapatalk
-
@marko14 said:
It is wery simple you have your opinion, i have mine,i wasn't rude,if you find it offensive that's not my problem,let's agree that we disagree, cheers.Sent from my SM-G960F using Tapatalk
Rule #3- if you come here with the idea that you "will decide what is best use and job" for your tool... Keep it to yourself. We are here to share a common interest in multiools, and this is probably the one forum in the worldwide web where we appreciate each other's opinions. (Maybe this is the same as Rule #2
) -
@ElevenBlade said:
Rule #3- if you come here with the idea that you "will decide what is best use and job" for your tool... Keep it to yourself. We are here to share a common interest in multiools, and this is probably the one forum in the worldwide web where we appreciate each other's opinions. (Maybe this is the same as Rule #2
)Sorry for asking but who gave you authority to tell me that i should keep my opinion for myself?You said yours and nobody asked you.Chill out and use your tool in whatever way you want and i will do same with mine.I would ask you if you want to continue this conversation to send me PM,we are OT,and that's not ok to other members,cheers.
Sent from my SM-G960F using Tapatalk
-
If you have glasses with a loosened screw, that IS an emergency situation!
In this situation with no other possisibility I would take the risk of ruining the point of my blade too.
That mini screw can be lost within seconds and renders your glasses useless.BTW, it is a fact of life that written messages (blogs, e-mails etc.) always 'sound' harsher as they were intended to be.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

