What did you use your Sak on today?
-
SAK enthusiasts everywhere

-
@MacGyver said:
AAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHH......... :ahhhYou used the tip of the blade as a screwdriver??? :o

That's a capital offense for any SAK user/lover

Could have use the bottom tip of the can opener, or the tip of the tweezers, it would had worked just as good if not better for that.
That's the main reason why i don't let anyone borrow my SAK's...

Well, there is something called "respecting your tools", meaning not abusing them... unless it's an emergency situation and you have to....
I will decide what is best use and job for my tool,thank you...cheers
Sent from my SM-G960F using Tapatalk
-
-

Forester did some firewood ;)
What it really did was to cut some rope and large nylon sacks for trash fire. The winter is coming.Sent from my iPhone using Tapatalk
-
@old Lefty said:

Forester did some firewood ;)
What it really did was to cut some rope and large nylon sacks for trash fire. The winter is coming.Sent from my iPhone using Tapatalk
Always good to see the Forrester M Grip put to use. I can spend hours fussing over 2-3 layer 111mm SAKs. At that weight class, the details of scales, and thumb holes, and back tools make a whole lot more difference
-
@marko14 said:
I will decide what is best use and job for my tool,thank you...cheersSent from my SM-G960F using Tapatalk
Mate, let's get two things straight right now:
1- No need to be rude ou unpleasant. I was being (or trying to be) humorous about it.
2- I'm entitled to my opinion (and the others too). If you don't want people to comment on your post, it's simple... Don't post! -
@MacGyver said:
Mate, let's get two things straight right now:1- No need to be rude ou unpleasant. I was being (or trying to be) humorous about it.
2- I'm entitled to my opinion (and the others too). If you don't want people to comment on your post, it's simple... Don't post!It is wery simple you have your opinion, i have mine,i wasn't rude,if you find it offensive that's not my problem,let's agree that we disagree, cheers.
Sent from my SM-G960F using Tapatalk
-
@marko14 said:
It is wery simple you have your opinion, i have mine,i wasn't rude,if you find it offensive that's not my problem,let's agree that we disagree, cheers.Sent from my SM-G960F using Tapatalk
Rule #3- if you come here with the idea that you "will decide what is best use and job" for your tool... Keep it to yourself. We are here to share a common interest in multiools, and this is probably the one forum in the worldwide web where we appreciate each other's opinions. (Maybe this is the same as Rule #2
) -
@ElevenBlade said:
Rule #3- if you come here with the idea that you "will decide what is best use and job" for your tool... Keep it to yourself. We are here to share a common interest in multiools, and this is probably the one forum in the worldwide web where we appreciate each other's opinions. (Maybe this is the same as Rule #2
)Sorry for asking but who gave you authority to tell me that i should keep my opinion for myself?You said yours and nobody asked you.Chill out and use your tool in whatever way you want and i will do same with mine.I would ask you if you want to continue this conversation to send me PM,we are OT,and that's not ok to other members,cheers.
Sent from my SM-G960F using Tapatalk
-
If you have glasses with a loosened screw, that IS an emergency situation!
In this situation with no other possisibility I would take the risk of ruining the point of my blade too.
That mini screw can be lost within seconds and renders your glasses useless.BTW, it is a fact of life that written messages (blogs, e-mails etc.) always 'sound' harsher as they were intended to be.

-
While I don't like the idea of using the blade tip as a screwdriver, I doubt it'd come to much if any harm used on glasses screws, with very occasional, emergency use. From Marko writing that "Vic was only tool in pocket" I got the impression that it wouldn't normally be his first choice.
In fact, I tried it just now with a Camper's blade and it worked just fine, no damage to see. It's a low torque task after all. Normally I use the Rambler's Phillips to tighten my glasses screws.
My glasses screws have a combination Phillips head with a full width slot. The can opener tip is too thick for the slot and the tweezer tip has a poor grip and can't get the screw tight enough.
Before today's experiment, I'd never contemplated using a SAK blade on any screw. However, before I got into SAKs, if I was out and about and there had no choice I'd use my old scout/camping knife's blade on very small Phillips screws. The tip always held up. It was a harder carbon steel blade, though. At home I'd use a proper SD.
Marko, if you're still following this this thread and your SAK has a corkscrew, I'd recommend getting a mini screwdriver to keep in it for these kinds of situations. :)
-
.
-
@Sawl Goodman said:
While I don't like the idea of using the blade tip as a screwdriver, I doubt it'd do much, if any, harm on glasses screws, with very occasional, emergency use. From Marko writing that "Vic was only tool in pocket" I got the impression that it wouldn't normally be his first choice.In fact, I tried it just now with a Camper's blade and it worked just fine, no damage to see. It's a low torque task after all. Normally I use the Rambler's Phillips to tighten my glasses screws.
My glasses screws have a combination Phillips head with a full width slot. The can opener tip is too thick for the slot and the tweezer tip has a poor grip and can't get the screw tight enough.
Before today's experiment, I'd never contemplated using a SAK blade on any screw. However, before I got into SAKs, if I was out and about and there had no choice I'd use my old scout/camping knife's blade on very small Phillips screws. The tip always held up. It was a harder carbon steel blade, though. At home I'd use a proper SD.
Marko, if you're still following this this thread and your SAK has a corkscrew, I'd recommend getting a mini screwdriver to keep in it for these kinds of situations. :)
I had put my Buck 55 knockoff through this sort of task more times than I can count. Once I got the Cold Steel Voyager Tanto... Many a screw was driven with the flat edge forward of the (non-existent) belly of the blade.
Ever since I got into SAKs, my mindset changed. I suppose it's why I consider a SAK to be a type of multitool.
-
@ElevenBlade said:
I had put my Buck 55 knockoff through this sort of task more times than I can count. Once I got the Cold Steel Voyager Tanto... Many a screw was driven with the flat edge forward of the (non-existent) belly of the blade.I'd expect the Cold Steel in particular to have a pretty hard blade. Did you damage it driving screws?
Ever since I got into SAKs, my mindset changed. I suppose it's why I consider a SAK to be a type of multitool.
My first, long lost SAK - a Swisschamp - covered all major screwdriving likelihoods. When I got back into SAKs after losing my old camping knife I bought bought a Handyman paired with a Rambler, as well as a mini SD for the HM. Thus no need to use a blade on screws.
The horror of watching my boss use his single blade knife for all kinds of purposes was one of the prompts to buy him a Forester with mini SD for his birthday.
-
@Sawl Goodman said:
I'd expect the Cold Steel in particular to have a pretty hard blade. Did you damage it driving screws?My first, long lost SAK - a Swisschamp - covered all major screwdriving likelihoods. When I got back into SAKs after losing my old camping knife I bought bought a Handyman paired with a Rambler, as well as a mini SD for the HM. Thus no need to use a blade on screws.
The horror of watching my boss use his single blade knife for all kinds of purposes was one of the prompts to buy him a Forester with mini SD for his birthday.
The CS blade held up ok but did have a couple of dings and burrs, but it just wasn't practical to use the way I was using it. It would cam out with almost every turn (which is probably when the damage occurred). The edge damage didn't bother me much because, it turned out, I didn't use that segment of the edge for anything else.
At the time, I was using other blades for camping trips... But the one time I took it on trip (I couldn't find or didn't have easy access to my other knives at the time for some reason) - the blade shape was so poorly suited for campsite tasks... I shelfed it once I got home.
Thus began my affair with the drop point, spear point and Kephart style blades. My favorite camping lockback knife has a Kephart style blade... As does the Victorinox OHT if you aren't too strict in applying the forms.
I'm not sure where I was on my SAK journey toward monogamy at the time. I most probably was using the LM Wave for EDC but left it home due to weight.
-
Although I’ve been trying to just use my LM juice while doing the challenge had to go back to my trusty manager for these little philip’s, juice way too big

Sent from my iPhone using Tapatalk
-
@Sawl Goodman said:
While I don't like the idea of using the blade tip as a screwdriver, I doubt it'd come to much if any harm used on glasses screws, with very occasional, emergency use. From Marko writing that "Vic was only tool in pocket" I got the impression that it wouldn't normally be his first choice.Mini screwdriver is definitely my choice but since i wasn't at home i had to work with tool that was in my pocket.[emoji3]
Marko, if you're still following this this thread and your SAK has a corkscrew, I'd recommend getting a mini screwdriver to keep in it for these kinds of situations. :)
[emoji1689]
Sent from my SM-G960F using Tapatalk
-
Handyman day:

Pushed a new baseball into service yesterday. Had to use scissors this morning to cut a loose stich that kept on disturbing me
Once the hat was sorted it was time to rip open the foil of an engine oil bottleSent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

