Gerber Armbar Owners Club
-
Not a big fan of this tool to be honest. No locking other than the knife (liner lock works great here). The scissors has this little nub that should have been expanded for ease and comfort of use. My thumb started feeling the pressure of that minuscule curved piece of metal that interfaces with you. My copy appears to cut ok...but the puny little spring is more than useless as my copy appears to be somewhat tight and does't do a good job of springing the two scissor blades apart. I do like the driver however, and the awl is cute and I suppose effective. The bottle opener on the end appears to have the best tactility of the whole tool set. I still cannot phantom why the other tools do not lock, or even snap into place. It is like working with a wet spaghetti noddle.I tried using the driver and it functions good...but wants to always rotate on you simply because there is no snap or locking mechanism. At least you can angle the handle whichever degree you want to get some effective torque I guess.
-
Thanks for your observations, they basically mirror my thoughts. I guess the no-snap on those tools is really intended. I guess I will never understand the thought process behind this decision

-
@SirVicaLot said:
Thanks for your observations, they basically mirror my thoughts. I guess the no-snap on those tools is really intended. I guess I will never understand the thought process behind this decision
Yep, not having bought the tool (yet) but looking at pictures and videos I'd say without a doubt that the no-snap was intentional.... Like the Bassett Trim Trio that I have finally identified after all these years.
Now, why they made that decision, I couldn't say. They've clearly stated that they intend the Armbar to be a backup to a folder. With the Centerdrive being so popular, my guess is they are trying hard not to cannibalize the rest of their product line.
-
But the Center Drive is a HUGE tool. The Armbar is a small pocket knife.
With locking tools and a pocket clip, I would have been interested in the Armbar Drive, and likely would have carried it more than my Center Drive. But alas, it wasn't meant to be.
Charles.
-
@SirVicaLot said:
As you can tell, it is about the same size as a Fieldmaster/HuntsmanI will prolly buy an Armbar someday just because I can't say no to a new toy, and its not expensive (now $29.58 on Amazon Prime), but a 4-layer SAK gives you 3x the tool selection in about the same footprint. So I can't get too tingly about the Armbar.
-
That is certainly true, but I think the bit holder for full size bits takes up a lot of space. There is still room for improvement, and with a little more R&D they could have streamlined it some more.
Honestly, I would consider the Armbar the perfect companion for my bladeless MP600, but in its current state there is no way to carry and enjoy using it
-
I bought a 2nd one by accident. Thinking of adding a pocket clip somehow and possibly EDCing it.
-
@Chako said:
I bought a 2nd one by accident. Thinking of adding a pocket clip somehow and possibly EDCing it.Not sure where... but I saw an aftermarket pocket clip attached to the "front" or "back" instead of the side. Someone was thinking outside the box - hopefully that helps you come up with an idea.

-
That does help.
-
You could also fabricate one yourself and attach it to the “cage” where the knife sits in. Might be able to use screws, or if not possible, you can use heavy duty double sided tape. Works like a charm on my MP400.

-
I found a pair of Nite Ize HipClips with 3M tape backing on Amazon.
-
They should work just fine

-
I've just bought one of these but need to modify it for UK friendly use. Anyone know how to disassmble this> I have tried heating it but one side has a crossnut and the other has the badge but neither side wants to budge?
-
I haven‘t disassembled one yet, but I assume they are similar to the MP‘s. Meaning the screw is secured with thread locker. Carefully heat up the screw to break the lock. (I used either a hot water bath or a lighter for it).
If it is like the MP‘s, then only one side of the screw/bolt will turn. Normally the side that sits in the frame and won‘t turn, is the one where the slits are aligned with the frame. The other side, is normally misaligned with the frame. That‘s the side you want to turn.
Here is a picture of my MP600 to illustrate what i mean:

The left bolt is aligned with the frame, the right one is not. Therefore, the left side is the bolt that sits in the frame, the right one is the screw that can be turned.Hope this helps!

-
Just joined the club!
Honestly, I like the armbar!
The blade is really really nice. I like the hollow grind, the shape, the size relative to the frame, the lockup. It's a really nice knife that really makes SAKs and LM T series blades look puny despite being in a similarly sized overall package.
The bit exchanger is nice. My armbar has zero spring retention. I'll be honest though, testing it out a bit, it hasn't folded on me. Of course it could, but I think everything being center aligned makes it so that if you are careful it just won't fold. If you do anything at an angle you are in the danger zone. It's a shame - a good backspring or lock would make this tool amazing.
The awl is sharp, but here the lack of spring retention is more worrying.
Scissors are only okay. Not sure what the problem is, they seem to line up fine and are sharp. Good for paper, string, a struggle on cardboard. They do it, but it takes force. I wonder if they are just too thin.
Overall a good tool. I like it. Lack of pocket clip means it will never displace my LM T4 or an SAK with swissqlip in my rotation though. Inexcusable.
-
Well after some back and forth about getting one or not... I broke down and got one ::) :D
I really
the Armbar and have wanted to get one since the beginning :ahhh the bad feedback has been what has kept me from getting one until now 
I am hoping that since I did wait that I won't have any of the early bugs that the first run has shown
;)So far so good


I do agree what most have said about the scissors though
why couldn't they have used a better design
still they cut, so there is that
the awl is a bit small but seems sharp enough to drill or poke holes in things
:DI really
the bit driver and the option to use regular 1/4 inch bits
of course none of these lock and that is a bit of a drawback
not a complete deal breaker but a push tab lock could have been incorporated and this tool would have been much harder to beat 
Next up is the knife blade



My one seems to lock up well and just about as tight as can be
I really love the shape of this blade and wished that Gerber and other MT companies used this shape blade in more tools 
I wished it came with a clip but with the way it is designed wpuld be harder to implement
one side the clip would be in the way of the bit driver and the other side would be in the way of the knife 
I almost forgot about the hammer end :ahhh this is a really great feature that takes no space up and if I don't end up carrying this knife, I may take it apart and try to incorporate this into my Charge knife


My Charge knife is very similar to this knife and actually predates it
it does have everything the Armbar has except for an awl and the hammer but adds a diamond file and also has a removable clip 

Also a Link to my Charge knife Thread

-
Glad to see a review that isn't all bad news. I'm still planning on getting the armbar cork. All I would want on this, given the specialized use would be a passable flat screwdriver. Hopefully the prybar will get the job done.
-
Thanks for that great, objective review, Poncho; as I read through, looks like you nailed it with both good and not-so-good of it. Looking at your pictures, could it be possible to add a clip to the skeletonized side? It would be tip-up carry, but otherwise good. Oooh, and it looks so good in orange!


-
Or attaching a clip to the spine, maybe?
-
I do
the Orange 8)I was looking at the Skeletool and Skeletool KB clips and those would be possible clips for the bit driver side that might work
They might be slender enough to be out of the way of the bit driver and still work well as a clip
I don't have a donor for either at the moment or I would try them 
The spine clip would be nice but I am not sure how to attach it easily though

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login