Gerber Armbar Owners Club
-
You could also fabricate one yourself and attach it to the “cage” where the knife sits in. Might be able to use screws, or if not possible, you can use heavy duty double sided tape. Works like a charm on my MP400.

-
I found a pair of Nite Ize HipClips with 3M tape backing on Amazon.
-
They should work just fine

-
I've just bought one of these but need to modify it for UK friendly use. Anyone know how to disassmble this> I have tried heating it but one side has a crossnut and the other has the badge but neither side wants to budge?
-
I haven‘t disassembled one yet, but I assume they are similar to the MP‘s. Meaning the screw is secured with thread locker. Carefully heat up the screw to break the lock. (I used either a hot water bath or a lighter for it).
If it is like the MP‘s, then only one side of the screw/bolt will turn. Normally the side that sits in the frame and won‘t turn, is the one where the slits are aligned with the frame. The other side, is normally misaligned with the frame. That‘s the side you want to turn.
Here is a picture of my MP600 to illustrate what i mean:

The left bolt is aligned with the frame, the right one is not. Therefore, the left side is the bolt that sits in the frame, the right one is the screw that can be turned.Hope this helps!

-
Just joined the club!
Honestly, I like the armbar!
The blade is really really nice. I like the hollow grind, the shape, the size relative to the frame, the lockup. It's a really nice knife that really makes SAKs and LM T series blades look puny despite being in a similarly sized overall package.
The bit exchanger is nice. My armbar has zero spring retention. I'll be honest though, testing it out a bit, it hasn't folded on me. Of course it could, but I think everything being center aligned makes it so that if you are careful it just won't fold. If you do anything at an angle you are in the danger zone. It's a shame - a good backspring or lock would make this tool amazing.
The awl is sharp, but here the lack of spring retention is more worrying.
Scissors are only okay. Not sure what the problem is, they seem to line up fine and are sharp. Good for paper, string, a struggle on cardboard. They do it, but it takes force. I wonder if they are just too thin.
Overall a good tool. I like it. Lack of pocket clip means it will never displace my LM T4 or an SAK with swissqlip in my rotation though. Inexcusable.
-
Well after some back and forth about getting one or not... I broke down and got one ::) :D
I really
the Armbar and have wanted to get one since the beginning :ahhh the bad feedback has been what has kept me from getting one until now 
I am hoping that since I did wait that I won't have any of the early bugs that the first run has shown
;)So far so good


I do agree what most have said about the scissors though
why couldn't they have used a better design
still they cut, so there is that
the awl is a bit small but seems sharp enough to drill or poke holes in things
:DI really
the bit driver and the option to use regular 1/4 inch bits
of course none of these lock and that is a bit of a drawback
not a complete deal breaker but a push tab lock could have been incorporated and this tool would have been much harder to beat 
Next up is the knife blade



My one seems to lock up well and just about as tight as can be
I really love the shape of this blade and wished that Gerber and other MT companies used this shape blade in more tools 
I wished it came with a clip but with the way it is designed wpuld be harder to implement
one side the clip would be in the way of the bit driver and the other side would be in the way of the knife 
I almost forgot about the hammer end :ahhh this is a really great feature that takes no space up and if I don't end up carrying this knife, I may take it apart and try to incorporate this into my Charge knife


My Charge knife is very similar to this knife and actually predates it
it does have everything the Armbar has except for an awl and the hammer but adds a diamond file and also has a removable clip 

Also a Link to my Charge knife Thread

-
Glad to see a review that isn't all bad news. I'm still planning on getting the armbar cork. All I would want on this, given the specialized use would be a passable flat screwdriver. Hopefully the prybar will get the job done.
-
Thanks for that great, objective review, Poncho; as I read through, looks like you nailed it with both good and not-so-good of it. Looking at your pictures, could it be possible to add a clip to the skeletonized side? It would be tip-up carry, but otherwise good. Oooh, and it looks so good in orange!


-
Or attaching a clip to the spine, maybe?
-
I do
the Orange 8)I was looking at the Skeletool and Skeletool KB clips and those would be possible clips for the bit driver side that might work
They might be slender enough to be out of the way of the bit driver and still work well as a clip
I don't have a donor for either at the moment or I would try them 
The spine clip would be nice but I am not sure how to attach it easily though

-
Join as well.
So as written not swiss quality tool. But different solution, light for pocket carry. Knife and driver are fast to deploy. As well bottle opener / prybar. Those are important features if going to use pocket tool often. And main reasons got one and join the club.
I have had many gerbers those have not been happy with. This I am quite sure already will get lot of pocket time and usage. Other is MP400 I like.
Scissors are more difficult to deploy. As there are no lock (well dont need in scissor usage) you have to play a bit to get scissors to use position. In MP400 with lock you can just turn and turn. With this have to turn then hold and turn to use position.
But even so if hammer / cap lifter / prybar, driver and blade as primary tools, set is good. And still have scissors can be used. And awl.
I have carried super tinker quite lot. Tools are quite similar. Pioneer X I could see option as well. Yes higher quality. So mainly reason I now carry this are new ideas and concept. With primary tools this is quite usable one handed. Opening blade one handed with tool this small is not very fluent (i have big hands). But doable. Again what to do most with EDC is carry. And there small size is a huge plus.
Lets see how it feels after longer period of usage. Now feeling positive. At least going to give a good change to be long time partner.

Lähetetty minun ASUS_X00TD laitteesta Tapatalkilla
-
Great write up, temo

I hope that the Armbar works out well for you

-
Looks like they are coming out with some new ones.
-
Ty Poncho and Steve.
Yes seems slim coming. Cut with knife and scissors, drive with knife and driver. So bit smaller and smaller tool set. Im okay with size of current. And like to click hammer / opener :) But sure two main tools with slim set can be good.
Lähetetty minun ASUS_X00TD laitteesta Tapatalkilla
-
@SteveC said:
Looks like they are coming out with some new ones.Wow .... squarely in competition with Victorinox - on their website "You won’t find rounded smooth plastic or thin dainty blades on this tool. Large tool tabs and indications get you to the right tool the first time with a thumb, not a finger nail"
I'm not sure what I think of these... At first glance, I'd pass them up... but I'm intrigued by the Slim version.... of only that it eliminates tools that otherwise require a backspring.
-
@ElevenBlade said:
Wow .... squarely in competition with Victorinox - on their website "You won’t find rounded smooth plastic or thin dainty blades on this tool. Large tool tabs and indications get you to the right tool the first time with a thumb, not a finger nail"I'm not sure what I think of these... At first glance, I'd pass them up... but I'm intrigued by the Slim version....** of only that it eliminates tools that otherwise require a backspring. **
If only their deeds, design and execution would live up to those big words. Unfortunately all you get are big words, and a tool that can’t live up to them ::)
They don’t like backsprings, apparently they have no clue how to get them to work right >:D
-
Agree with back spring. Gerber often uses plate frame like in armbar and there is no spring action to tools. Very small if not at all tension in close and open position. So best to design tools for that. Maybe would require polished steel to fluently slide even tension would be there. Anyway vic is mastered that so well better if others do different design. And find they own way.
Lähetetty minun ASUS_X00TD laitteesta Tapatalkilla
-
Saved ultimate bottle opening test till friday. Opener is short so it will turn edge of the cap up. Did two lifts to remove a cap. As result get a bottle open, cap bended. Looks slim has longer cap lifter so could work in one lift. This has short as turns in to hammer. I would call this cap bender / remover rather then lifter. Does the work needed, removes cap from a bottle making doable to drink liquid in bottle.

Lähetetty minun ASUS_X00TD laitteesta Tapatalkilla
-
@temo said:
Saved ultimate bottle opening test till friday. Opener is short so it will turn edge of the cap up. Did two lifts to remove a cap. As result get a bottle open, cap bended. Looks slim has longer cap lifter so could work in one lift. This has short as turns in to hammer. I would call this cap bender / remover rather then lifter. Does the work needed, removes cap from a bottle making doable to drink liquid in bottle.
Lähetetty minun ASUS_X00TD laitteesta Tapatalkilla
Nice Schlenkerla
Enviado de meu moto g(6) usando o Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login