Knot in October GAW
-
I do know the correct term....

I had a sea-farring Brother-in-law who taught me to splice three-strand. It's a real skill....one that I never mastered...but can still manage.
I spliced an eye in this rope to use in one of the truck's tie-down rings. It just seemed easier to slip the loop through and then feed the rope back through the loop than tie a bulky knot there. And I believe a good splice (not pictured above) is stronger than any knot.
Cool skill to have; I should practice more.

Aye, I keep a few lengths of cord with eyesplices laying around for just this purpose - the eye makes an easy cow hitch through a shackle or tie rail.
If you really want, you can have both ends with eyes - then the other end can be used for a variation on the truckers hitch, fed through another "link" to extend it, (giving the appearance of a reef knot...) or whatever else you may need.
There's a few other variations you can do when tying depending on how it is going to be used - you can tie a half hitch before the rope - this can assist with very narrow and slippery material (say for a knife lanyard) - more of a detriment in a lot of other applications. You can taper the splice by cutting the strands to different lengths, which will give a smoother finish.
Some people like to put whipping over their splices. It's not really required, but if you are using it in an anchor chain or something, it may be worthwhile as all that wet/dry/going through the bowroller can be hard, and you want confidence that your anchoring system isn't going to fail at any point

To do good splices takes a bit of preparation and some basic tools.
Mine are normally done by hand while watching the telly on the couch, so they're all over the shop in terms of consistency and quality, but since I don't use three strand for any rigging applications anyway, they're good enough for my purposes.
For people who are into this sort of thing - a 6 foot bit of rope with a couple of eyesplices was standard equipment for british commandos - it was considered just that handy.
-
Nice one, RF!
Another straightforward knot that gets used a good bit. I think the pair of half-hitches was the only knot my father knew. He could be taught other knots, but he would forget them in short order, so everything he tied down got finished with a pair of half hitches.
Take the working line around a post or ring a second time, and you end up with the classic "Round turn and two hitches." This seems to get used in nautical circles (no pun intended). The extra turn gives the knot a bit of extra holding power, I think. Might be a good idea if your dogs are large and very active.


You guys can probably tell by now that I like a quick release knot and add a slippery bight to the end of many knots. I've found this to be useful when tying down gear or tying up a dog:

-
@Sea Monster said:
Some people like to put whipping over their splices. It's not really required, but if you are using it in an anchor chain or something, it may be worthwhile as all that wet/dry/going through the bowroller can be hard, and you want confidence that your anchoring system isn't going to fail at any point
My whipping is worse than my splicing....
Ashley has some good pointers on whipping, though... 
-
-
http://www.1stairborne.com/webgear.html
Oh, I enjoyed that.

A short Wiki entry on the toggle rope: https://en.wikipedia.org/wiki/Toggle_rope
-
Another straightforward knot that gets used a good bit. I think the pair of half-hitches was the only knot my father knew. He could be taught other knots, but he would forget them in short order, so everything he tied down got finished with a pair of half hitches.
Take the working line around a post or ring a second time, and you end up with the classic "Round turn and two hitches." This seems to get used in nautical circles (no pun intended). The extra turn gives the knot a bit of extra holding power, I think. Might be a good idea if your dogs are large and very active.


You guys can probably tell by now that I like a quick release knot and add a slippery bight to the end of many knots. I've found this to be useful when tying down gear or tying up a dog:

My dad is the same

The half hitches are so simple that I believe everyone knows how to tie it
I trust the half hitches with the one loop around whatever I'm tying my dog to, it has hold up so far, he is about 75-80 lbs and has a tendency to go crazy at other male dogs
Sent fra min FRD-L09 via Tapatalk
-
My 4th entry will be the bowline on a bight knot. Or how we call it here, double bowline. There are many applications of it, some use it to tie in, some to attach the rope to anchor points when decending a rope, some for a Y-hang when the load needs to be evenly devided between two anchor points. It is very easy to tie, and most importantly, untie after being subjected to heavy loads, and I'd say the untie part is the only benefit it has to the double figure 8 knot.
To tie it, make an overhand knot. Flip it over and grab the bottom two wraps and pull them through the loop of the overhand and tighten. Done. But be careful, if you grab the wrong wraps, the top ones, not the bottom ones, you will tie a similar knot, but not a safe one. It's easy to se if it is a good one by applying force to it, if it just tightens the knot and the loops remain, it's good. If the knot slides and the loops get smaller, try again

And most importantly, always clip in through both loops, as if only one loop is loaded the knot might slip, and we don't want that.



-
-
Nice knots!
Anxious to spend some funny hours with my son tying knots in the weekend.
[emoji3]
Enviado de meu moto g(6) usando o Tapatalk
-
-
[emoji3]
I'll tell!Enviado de meu moto g(6) usando o Tapatalk
-
My spoiler knot: the Jug Knot or Bottle Knot.
This is a fun knot to tie, but can be a bit tricky. It is a knot that gets made by weaving and folding a couple of bights. So that's fun. It is useful for putting a sling on a bottle to sink in a river to chill....so I've heard....
But it is also a great little knot to make a carrying handle for a water bottle--an easy way to tie and extra bottle to a pack, bag, or belt.This will be very picture intensive because I fear that words will fail me. Bear with me: it looks tricky but is actually quick and easy once you get the idea.
To start, form two bights, both crossing under a center point:

I now shift the right hand bight slightly over the left hand bight:


Now, the center section get folded into a bight and pulled under the left hand tail:


Above the bight, there is an oval opening formed by the crossing of the two initial bights. Our new bight gets woven over the near side, and under the far side of this oval.


Our bight now get pulled up and out of the knot to form part of the future handle:


We're getting close!
We now have a loop in the back of the knot, this gets folded down, behind the knot:


In the front of the knot, there is another loop. This gets folded down in the front:


The knot is now done! It just needs to be dressed and snugged down on a bottle:


-
-
Looks cool and is probably fun to tie, I'll give it a try, but I'll still most likely stick to my strangler knot for bottles and such. The beast you know, ...
And it uses less cordage, which is always a bonus in my book.

-
-
My fourth entry is the Arbor Knot/Canadian jam knot.
https://en.wikipedia.org/wiki/Arbor_knot
This is the easiest noose you can tie. It is a running knot with a stopper knot. Shawn Kelly (Corporal's Corner) uses it a lot, and it is extremely easy to do. A couple of knots, and you're done.How to tie it:
- Go around the things you want tied.
- Tie an overhand knot around the line (aka running knot).
- Tie an overhand knot with the tail, for the stopper knot.
- You can move the two knots closer to minimize used length.

-
@Nix said:
My spoiler knot: the Jug Knot or Bottle Knot.This is a fun knot to tie, but can be a bit tricky. It is a knot that gets made by weaving and folding a couple of bights. So that's fun. It is useful for putting a sling on a bottle to sink in a river to chill....so I've heard....
But it is also a great little knot to make a carrying handle for a water bottle--an easy way to tie and extra bottle to a pack, bag, or belt.This will be very picture intensive because I fear that words will fail me. Bear with me: it looks tricky but is actually quick and easy once you get the idea.
To start, form two bights, both crossing under a center point:

I now shift the right hand bight slightly over the left hand bight:


Now, the center section get folded into a bight and pulled under the left hand tail:


Above the bight, there is an oval opening formed by the crossing of the two initial bights. Our new bight gets woven over the near side, and under the far side of this oval.


Our bight now get pulled up and out of the knot to form part of the future handle:


We're getting close!
We now have a loop in the back of the knot, this gets folded down, behind the knot:


In the front of the knot, there is another loop. This gets folded down in the front:


The knot is now done! It just needs to be dressed and snugged down on a bottle:


Nice one! Might try that sometime

Sent fra min FRD-L09 via Tapatalk
-
More great knots.

My last entry is the Double Davy Knot. I swear I am not a fisherman. I do like to have a knot thats easy to do when I secure cordage to a carabiner or screw with eye. This is a pretty simple one to do and one that I can untie pretty easy when using paracord.
I start by putting paracord thru the biner then go around the running end thru the loop. I go over the tag end and back thru the loop. Repeat three times securing the tag against the biner. I sure hope that made sense
. Heres a picture to help.



-
-
@ReamerPunch said:
My fourth entry is the Arbor Knot/Canadian jam knot.
https://en.wikipedia.org/wiki/Arbor_knot
This is the easiest noose you can tie. It is a running knot with a stopper knot. Shawn Kelly (Corporal's Corner) uses it a lot, and it is extremely easy to do. A couple of knots, and you're done.This was going to be my next spoiler knot!

I actually learned this knot twice: once by each name. First as the Arbor knot to attach a fishing line to the arbor of a fishing reel. It always seemed like an overly simple knot, but it worked. So I continue to use it for that reason.
Later on in life, an Army instructor showed it to me as a Jam knot, aka Canadian Jam knot. In this configuration....which I didn't recognize as the Arbor knot at the time....
....It was used as a quick way to tie a poncho on to webbing gear or a sleeping bag into a roll. I have used it this way, but I'll warn you that I've seen poorly tied jam knots loosen up and soldiers look pretty sloppy and foolish trundling down a road with their sleeping bags falling out all over...... :-[(I have a trick to limit this embarrassment: see below)
The great thing about the Canadian Jam knot is that it offers 2:1 leverage for really cranking down on a bundle. It functions best when tensioned, so I think it works best on soft materials that compress well (like a rolled up poncho). I have seen it used to serve as a quick clamp or 'third hand' as well. I've heard it referred to as a 'string zip tie'. It is easy to keep a short length of string in a pocket--figure eight or overhand knots in both ends--and make a locking noose with the Canadian Jam knot to use like a zip tie.
Better yet, it is easy to release!

Here are my pics for the Canadian Jam:

I use a Figure 8 knot as the knot that creates the 'jam'. As RP stated, an Overhand knot is traditional, but I find a Figure 8 is easier to untie later on. I haven't seen a problem using the Figure 8. The other important tip is to have the tail (bit with the Figure
and the pulling line (standing line) coming through the loop of the Overhand knot in the same direction (in this case back to front). If this isn't the case the knot will slip. (And cause you to look a right proper idiot with your sleeping bag trailing in the dirt behind you....)
As the knot is tightened, the stopper knot (Figure 8 in this case) gets pulled down into the overhand knot. It's a good idea to snug down the Overhand knot a bit first, then pull the standing end through the overhand to tighten it up. This can be achieve with a ratcheting action. The tighter the line is pulled, the more the stopper knot jams the line into the Overhand.

This is still a slip knot, however, the stopper knot is jamming the standing line into the overhand sufficiently to hold it tight. You can see how my bundle (towel in this case) is really compressed and being well secured.
Another tip here is to leave plenty of tail after you tie your stopper knot. If the knot is really jammed down tight, it can be the devil to get undone. If you have a long tail after your stopper knot, it is a simple matter to grab that tail and pull up, the knot will loosen up and becomes easier to loosen up.
In general, I think it is best to tie the Canadian Jam with narrow string, especially string that has some inherent friction. Paracord or 550 is commonly used for this knot but can be a bit slippery in my mind (it works fine if you pay attention to the details.) Twine or bank line seems to work well.
Here is a rolled up towel being lashed to a dowel (could be a back pack or belt, though):

Everything is loose. The overhands need to be tightened up.....

Now we can ratchet those loops tight!
Once tightened up, I like to add a slip knot in the standing end. This just provides a bit of insurance. The Canadian Jam can still come loose a bit, but the slip knots will keep everything from spilling open (and the sleeping bag spilling out......). To untie, pull out the slip knots, then pull up the tails...the bundle is easily removed. The knot can stay tied on to the pack or webbing (or dowel in this case) for easy use later.

So, a great little knot if your want a quick and easy way to tension a couple things together or just need to 'zip tie' a couple of poles or pegs together. Definitely knot as secure as a Constrictor or Strangle, but a bit easier and quicker to tie and untie.

(And thanks for stealing my knot, RP...... :P)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


