Multitool file blades: worth having?
-
On a MT yes. The compromise is there but the utility of having a file is what having a MT with file is all about. I asked the question about MT files being like "real" files. I recall the question being brought up a while ago. I've used my file on my Wave and Charge mostly to knock down metal edges. Materials like aluminum and sheet metal mostly. These edges come up randomly so having a way to sand them down then and there is nice. I've cut and shaped with it too. Sure a dedicated tool is great but for me my MT needs to come off the bench and perform when called. I don't know when those moments will arise but its why I carry my Charge, I'm usually ready for whatever.
/post/1173362
-
@Nix said:
I agree that the diamond file has some value.What have you used your file(s) for?
I've used the SwissTool file for general filing, and cutting of non-hardened metals. I had to remove a rotted post, had forgotten my fence pliers, and the linesman's pliers I had were old, and wouldn't cut the thick wire. Had it cut through in just a few minutes by sawing through the staves with the ST file. Notching, as well as removing carbon from spark plugs and electrical contacts is another big use.
I've often used the diamond file on LM for hardened steel. I have ground down the kicks on several old, beat up traditional folders so the tip wouldn't stick up from the handle. If I encounter a dull or chipped garden tool, I'll sharpen it up with the diamond file.
-
I don't use the file all the time, but it has been useful many times
Mostly for adjusting fittings and deburring sheetmetal and sometimes I find them useful to file a socket that I have beaten so it won't fit my ratchet and usually the MT file is all that fits 
Sent fra min FRD-L09 via Tapatalk
-
I wore the diamond file on my wave smooth in my last job as it involved fitting kitchens and building furniture both from scratch and flat pack. And I was always coming across machine screws that were too long that ether required filing down a fraction or cutting and then cleaning up the end with a file.
This is why I wish waves came with a replaceable file/saw.
-
I use a file (both MT and dedicated) quite often
I use them when we are working with smooth cut stones like Indiana limestone and the like
I am the stone patcher on our jobs (among many other things ;) )and I have plenty of dedicated files, rasps, sandpaper and some other things for stone but having a small file with me is very handy if I am going through and just patching small chips
I use the regular file side, if using a diamond file, to smooth
dges down and take burrs off as well 
I use a file for many other uses as well. I use one as a fingernail file, the diamond side as a knife sharpener, debur tools and smooth things down in general at both work and home

I like the Vic files on both the 91mm and 74mm range but my favorite file is the Leatherman diamond file
it has a greater range of uses for me and that is why I included it in my Charge knife mod 
I voted 6 because I do carry MTs sometimes without a file, so it isn't a total deal breaker for me but I try to have my Charge knife with me to make up for it
of course a challenge always makes that a part a bit harder if the MT in it doesn't have a file
;) -
Also, I just really like files
:D -
They are useful as it is one of the tools that you are not likely to have on you.
however, not all files are equal
-
I vote 6 and 7 and get rid of the smurfing can openers already :D
-
Heresy!!!
-
@Poncho65 said:
I use a file (both MT and dedicated) quite often
I use them when we are working with smooth cut stones like Indiana limestone and the like
I am the stone patcher on our jobs (among many other things ;) )and I have plenty of dedicated files, rasps, sandpaper and some other things for stone but having a small file with me is very handy if I am going through and just patching small chips
I use the regular file side, if using a diamond file, to smooth
dges down and take burrs off as well 
How long does a multitool file last for you?

-
Voted 5; not much use other than the occasional fingernail filing, deburring, or smoothing edges on furniture, appliances wood, or soft metal projects. I like a lot the ST300, Rebar, or mp600 the most, followed up close by the Wave's.
-
-
-
@Juan el Boricua said:
Voted 5; not much use other than the occasional fingernail filing, deburring, or smoothing edges on furniture, appliances wood, or soft metal projects. I like a lot the ST300, Rebar, or mp600 the most, followed up close by the Wave's.Thanks for voting and giving us a sense of your uses!

Your input made me think about this question: "Do MTo'ers (the smartest multitoolers in the world. :D) choose a multitool based on the file?"

I can answer that question for myself, to a degree. I now avoid some brands of multitool in part....in part...because I know the files are poor quality. The nuanced version of my answer to my own question is this: if a manufacturer does n't care enough to make a good file, I believe they are not sufficiently concerned about the overall quality of their multitool. As a result, I suspect that their products are low-quality in general. And I won't buy them.
I find my response to be somewhat funny, because I don't value a file all that much in the first place. However, for me, a badly made file is the proverbial "canary in the coal mine", e.g. an indicator of the current level of overall quality.
So, for everyone else, do you choose a multitool based on the quality of the tool's file?

-
@Poncho65 said:
The stone is soft enough that it doesn't really wear the files I use out.... so I will let you know when I wear one out
I'm impressed!
Many of my sharpening 'stones' are made from rock......and stone. The whole purpose is to wear down, wear off, metal from the edge of my cutting edge. I would imagine that using a file to shape stone would shorten the life of a file.....especially a soft multitool file...rather quickly.
Nice to heat that multitool files are capable of filing down stone without dulling. (Although.....some of my multitool files have been so dull to start with that it might be hard to tell......)
-
I have used the ST300 file to knock down edges on wood and metal, I cut a notch in a piece of metal a few weeks ago (can’t for the life of me remember what I was doing however...) and put an edge on an absolutely awful axe that a friend brought camping the other weekend.
The file on my Sidekick leaves a lot to be desired. I have even thought about ways to modify it to carry a removable Needle File (or something similar) in the handle instead of the factory file.
My vote is “7 - must have”
-
@Nix said:
Thanks for voting and giving us a sense of your uses!
Your input made me think about this question: "Do MTo'ers (the smartest multitoolers in the world. :D) choose a multitool based on the file?"

I can answer that question for myself, to a degree. I now avoid some brands of multitool in part....in part...because I know the files are poor quality. The nuanced version of my answer to my own question is this: if a manufacturer does n't care enough to make a good file, I believe they are not sufficiently concerned about the overall quality of their multitool. As a result, I suspect that their products are low-quality in general. And I won't buy them.
**
I find my response to be somewhat funny, because I don't value a file all that much in the first place. However, for me, a badly made file is the proverbial "canary in the coal mine", e.g. an indicator of the current level of overall quality**.So, for everyone else, do you choose a multitool based on the quality of the tool's file?

And now you got me thinking; this reminds me of why I don't have an SOG Poweraccess Dlx; its file is about useless, as the teeth aren't properly cut (might as well be a Swisstool butter knife contender), and then the whispy spring bars coming from the frame/scales... too bad, as I've been longing for an SOG and the only one that atracts me is the Powelock (with its very thin blades). But the bittersweet feeling left from handling that Poweraccess, the stories heard, and the activity down at the SOG Forum steers me clear from them; waiting for a USA made Powerlock on the cheap.
-
I hear you.

-
I use the file mostly for filing nails, having a rough nail edge will drive me crazy.
I have used the file for filing down burrs on wood table, fence, gate, etc where a split left a rough edge that could have easily resulted in a sliver. I also used it for a burr where an aluminum table had been scraped. The edge was sharp enough to cut someone and the file made it smooth.
Another obscure use is filing or cutting and end on a dog treat. If Fisher doesn’t finish all his chew in the first sitting/day, he will bring the chew to me because he likes if I trim the chewed end a little. Just running the file across it a few times can make him really happy. I think it makes is smell fresher.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



