Multitool file blades: worth having?
-
They are useful as it is one of the tools that you are not likely to have on you.
however, not all files are equal
-
I vote 6 and 7 and get rid of the smurfing can openers already :D
-
Heresy!!!
-
@Poncho65 said:
I use a file (both MT and dedicated) quite often
I use them when we are working with smooth cut stones like Indiana limestone and the like
I am the stone patcher on our jobs (among many other things ;) )and I have plenty of dedicated files, rasps, sandpaper and some other things for stone but having a small file with me is very handy if I am going through and just patching small chips
I use the regular file side, if using a diamond file, to smooth
dges down and take burrs off as well 
How long does a multitool file last for you?

-
Voted 5; not much use other than the occasional fingernail filing, deburring, or smoothing edges on furniture, appliances wood, or soft metal projects. I like a lot the ST300, Rebar, or mp600 the most, followed up close by the Wave's.
-
-
-
@Juan el Boricua said:
Voted 5; not much use other than the occasional fingernail filing, deburring, or smoothing edges on furniture, appliances wood, or soft metal projects. I like a lot the ST300, Rebar, or mp600 the most, followed up close by the Wave's.Thanks for voting and giving us a sense of your uses!

Your input made me think about this question: "Do MTo'ers (the smartest multitoolers in the world. :D) choose a multitool based on the file?"

I can answer that question for myself, to a degree. I now avoid some brands of multitool in part....in part...because I know the files are poor quality. The nuanced version of my answer to my own question is this: if a manufacturer does n't care enough to make a good file, I believe they are not sufficiently concerned about the overall quality of their multitool. As a result, I suspect that their products are low-quality in general. And I won't buy them.
I find my response to be somewhat funny, because I don't value a file all that much in the first place. However, for me, a badly made file is the proverbial "canary in the coal mine", e.g. an indicator of the current level of overall quality.
So, for everyone else, do you choose a multitool based on the quality of the tool's file?

-
@Poncho65 said:
The stone is soft enough that it doesn't really wear the files I use out.... so I will let you know when I wear one out
I'm impressed!
Many of my sharpening 'stones' are made from rock......and stone. The whole purpose is to wear down, wear off, metal from the edge of my cutting edge. I would imagine that using a file to shape stone would shorten the life of a file.....especially a soft multitool file...rather quickly.
Nice to heat that multitool files are capable of filing down stone without dulling. (Although.....some of my multitool files have been so dull to start with that it might be hard to tell......)
-
I have used the ST300 file to knock down edges on wood and metal, I cut a notch in a piece of metal a few weeks ago (can’t for the life of me remember what I was doing however...) and put an edge on an absolutely awful axe that a friend brought camping the other weekend.
The file on my Sidekick leaves a lot to be desired. I have even thought about ways to modify it to carry a removable Needle File (or something similar) in the handle instead of the factory file.
My vote is “7 - must have”
-
@Nix said:
Thanks for voting and giving us a sense of your uses!
Your input made me think about this question: "Do MTo'ers (the smartest multitoolers in the world. :D) choose a multitool based on the file?"

I can answer that question for myself, to a degree. I now avoid some brands of multitool in part....in part...because I know the files are poor quality. The nuanced version of my answer to my own question is this: if a manufacturer does n't care enough to make a good file, I believe they are not sufficiently concerned about the overall quality of their multitool. As a result, I suspect that their products are low-quality in general. And I won't buy them.
**
I find my response to be somewhat funny, because I don't value a file all that much in the first place. However, for me, a badly made file is the proverbial "canary in the coal mine", e.g. an indicator of the current level of overall quality**.So, for everyone else, do you choose a multitool based on the quality of the tool's file?

And now you got me thinking; this reminds me of why I don't have an SOG Poweraccess Dlx; its file is about useless, as the teeth aren't properly cut (might as well be a Swisstool butter knife contender), and then the whispy spring bars coming from the frame/scales... too bad, as I've been longing for an SOG and the only one that atracts me is the Powelock (with its very thin blades). But the bittersweet feeling left from handling that Poweraccess, the stories heard, and the activity down at the SOG Forum steers me clear from them; waiting for a USA made Powerlock on the cheap.
-
I hear you.

-
I use the file mostly for filing nails, having a rough nail edge will drive me crazy.
I have used the file for filing down burrs on wood table, fence, gate, etc where a split left a rough edge that could have easily resulted in a sliver. I also used it for a burr where an aluminum table had been scraped. The edge was sharp enough to cut someone and the file made it smooth.
Another obscure use is filing or cutting and end on a dog treat. If Fisher doesn’t finish all his chew in the first sitting/day, he will bring the chew to me because he likes if I trim the chewed end a little. Just running the file across it a few times can make him really happy. I think it makes is smell fresher.
-
I can do quite well without another file at this point in time.

My most common use is to smooth out sharp edges of broken hardened plastic before I have the chance to get a new one of whatever it is. Second, it would be used to file down nails - and honestly, full sized MTs (anything besides a Vic Classic or Cadet, is rubbish at that)... The last time this happened was a year and a half ago when I got a hangnail that tore badly and bled within 20 minutes into setting up camp for a weekend in the woods.
I dont mind having a few files around - I appreciate having a file and metal saw on the SwissChamp, maybe on the Wave as well. On my MP600, it's not made well, and therefore is just taking up space. I also don't mind having to fetch a file when I need one (which arguably, is never). So at this point, I feel the same way about files as some do about can openers(maybe more strongly because of the utilized real estate).
-
I voted 7, and I value the metal saw far more than the metal file. Living in an urban environment, metal file to me is far more useful than a wood saw, since it can do what a wood saw does, but not the other way around.
I can't recall how many years ago that was, but once I was travelling with a Swisschamp for a long trip oversea in some remote area. And somehow I managed to loss the key to the luggage lock, and the metal saw was successful to cut open that lock in a matter of minutes. Without that metal saw/file, I could have been locked out of my own luggage and completely ruined the entire trip. Yes, one could argue what's the likelihood of that, but the same could go for anything self defense, CAT5 tourniquet or insurance purchased for health/house. You may not need it every day, but when you need it, you just do.
-
I once used the awl on a SAK to 'pick' the lock on a trunk when the key was missing. ...and, yes, it was my trunk....

-
@ElevenBlade said:
On my MP600, it's not made well, and therefore is just taking up space. I also don't mind having to fetch a file when I need one (which arguably, is never). So at this point, I feel the same way about files as some do about can openers(maybe more strongly because of the utilized real estate).
-
In your OP Nix you talk about "when files were well made" or some such. Totally spot on. A friend of mine is a heavy file user and he uses them on hardwood. That is a very demanding use and the files have to sharp**** or they just skip away.
I've carried a Leatherman Wave since '98 and I wish they had a good file. I've used the file on it, but oh man. Unimpressive, to say the least.
Cat
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


