Multitool file blades: worth having?
-
I can do quite well without another file at this point in time.

My most common use is to smooth out sharp edges of broken hardened plastic before I have the chance to get a new one of whatever it is. Second, it would be used to file down nails - and honestly, full sized MTs (anything besides a Vic Classic or Cadet, is rubbish at that)... The last time this happened was a year and a half ago when I got a hangnail that tore badly and bled within 20 minutes into setting up camp for a weekend in the woods.
I dont mind having a few files around - I appreciate having a file and metal saw on the SwissChamp, maybe on the Wave as well. On my MP600, it's not made well, and therefore is just taking up space. I also don't mind having to fetch a file when I need one (which arguably, is never). So at this point, I feel the same way about files as some do about can openers(maybe more strongly because of the utilized real estate).
-
I voted 7, and I value the metal saw far more than the metal file. Living in an urban environment, metal file to me is far more useful than a wood saw, since it can do what a wood saw does, but not the other way around.
I can't recall how many years ago that was, but once I was travelling with a Swisschamp for a long trip oversea in some remote area. And somehow I managed to loss the key to the luggage lock, and the metal saw was successful to cut open that lock in a matter of minutes. Without that metal saw/file, I could have been locked out of my own luggage and completely ruined the entire trip. Yes, one could argue what's the likelihood of that, but the same could go for anything self defense, CAT5 tourniquet or insurance purchased for health/house. You may not need it every day, but when you need it, you just do.
-
I once used the awl on a SAK to 'pick' the lock on a trunk when the key was missing. ...and, yes, it was my trunk....

-
@ElevenBlade said:
On my MP600, it's not made well, and therefore is just taking up space. I also don't mind having to fetch a file when I need one (which arguably, is never). So at this point, I feel the same way about files as some do about can openers(maybe more strongly because of the utilized real estate).
-
In your OP Nix you talk about "when files were well made" or some such. Totally spot on. A friend of mine is a heavy file user and he uses them on hardwood. That is a very demanding use and the files have to sharp**** or they just skip away.
I've carried a Leatherman Wave since '98 and I wish they had a good file. I've used the file on it, but oh man. Unimpressive, to say the least.
Cat
-
I voted "nice option, but not important".
I carried a Vic Mountaineer pretty regularly for years. Other than my fingernails (and a nail file really isn't critical IMO, especially if one has scissors), I think I only maybe used it one time. That was to cut some wire (and yes, wire cutters would have been better, but I didn't have those on me).
-
It is funny I was just thinking this about saws on multitools and "saw" this. I voted 6, I like the file on my Wave and it has come in handy to cut through plastic pipe and file off rough edges on things. For me on a multitool the order of importance of tools is the pliers, the screwdrivers, knife, and some type of mini pry bar. That is one of the reasons I love the Wave as it has good pliers, with the bit kit set and extender it can handle most screwdriver tasks well, and the OHO knife with lock is pretty decent. The saw on the Wave is really good and the file is ok but if the Wave didn't have either I would be fine. Overall to answer the original question I would say yes worth having but not critical.
-
I went with 7
I'd rather have one and not need it over need it and not have it, I'm also quite happy with the one on my Rebar, it does a first rate job of smoothing edges and cleaning up threads
-
The Rebar does have a good file on it
I actually did receive one (it was second hand and very used) that I ended up replacing on that one though as it wasn't very good :ahhh but all the ones that I have bought otherwise work great

-
Ah, one of those discussions about how useful a certain tool implement on a Multi Tool is.
This might run for a while :DI do have a "frequent enough" need for a file on a Multi Tool for reasons mentioned (wood, plastic, metal, manicure...).
If a Multi Tool has a useful file then "yes please".
Otherwise please no!
-
Last night while connormac was working on his RC truck, he reached for my TTi so he could use the file on a couple of bits. I tried taking a pic, but he broke the camera.


-
@McStitchy said:
If a Multi Tool has a useful file then "yes please".
Otherwise please no!
I think I'm of the same mindset.
I've been disappointed by so many multitool files. So, infrequent use met with limited utility (for the file's form factor) has left me thinking I don't really need a file in my multitool.
I recently acquired a Vic Hercules. A big SAK. A Workchamp would add a file...and an extra layer. But I decided that the Hercules was just at the upper limit of comfort for size. (I'll find out in the January 111mm challenge.) While the Vic file is a decent file (for file that is soft and not properly hardened), the value of having a file was negated by the extra size. So I chose the Hercules.
My guess is that many people make the very same decision. The Hercules is still in production. The Tradesman in not. Coincidence?

-
After tomorrow I will have a file with me and the world will be right again :D
Charge knife for the win

-
Yes. And I will have a Vic Classic....with one of my favorite multitool files. :D
-
I went with 2, I live having ready access to a metal file, it's one of the few tools I can't replicate in the wild or have on many other tools. I do have a Rolson fileset, but I'd rather just use a MT than dig that out of the cupboard

In the six months I've used my files (Rebar, Swisstool and Wave) to:
-Saw the tip off a nail and deburr the edge to make a ducktape roll
-Saw the lock off of my Gerber Zipknife since it got stuck open (filing down the corners and burrs)
-Polish out a chip in the edge of the 'package openener' on both my Rev (awful tool
) and Free T4And other misc. edge smoothing, I understand having a file a lot more than I understand having a woodsaw

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


