Multitool file blades: worth having?
-
@ElevenBlade said:
On my MP600, it's not made well, and therefore is just taking up space. I also don't mind having to fetch a file when I need one (which arguably, is never). So at this point, I feel the same way about files as some do about can openers(maybe more strongly because of the utilized real estate).
-
In your OP Nix you talk about "when files were well made" or some such. Totally spot on. A friend of mine is a heavy file user and he uses them on hardwood. That is a very demanding use and the files have to sharp**** or they just skip away.
I've carried a Leatherman Wave since '98 and I wish they had a good file. I've used the file on it, but oh man. Unimpressive, to say the least.
Cat
-
I voted "nice option, but not important".
I carried a Vic Mountaineer pretty regularly for years. Other than my fingernails (and a nail file really isn't critical IMO, especially if one has scissors), I think I only maybe used it one time. That was to cut some wire (and yes, wire cutters would have been better, but I didn't have those on me).
-
It is funny I was just thinking this about saws on multitools and "saw" this. I voted 6, I like the file on my Wave and it has come in handy to cut through plastic pipe and file off rough edges on things. For me on a multitool the order of importance of tools is the pliers, the screwdrivers, knife, and some type of mini pry bar. That is one of the reasons I love the Wave as it has good pliers, with the bit kit set and extender it can handle most screwdriver tasks well, and the OHO knife with lock is pretty decent. The saw on the Wave is really good and the file is ok but if the Wave didn't have either I would be fine. Overall to answer the original question I would say yes worth having but not critical.
-
I went with 7
I'd rather have one and not need it over need it and not have it, I'm also quite happy with the one on my Rebar, it does a first rate job of smoothing edges and cleaning up threads
-
The Rebar does have a good file on it
I actually did receive one (it was second hand and very used) that I ended up replacing on that one though as it wasn't very good :ahhh but all the ones that I have bought otherwise work great

-
Ah, one of those discussions about how useful a certain tool implement on a Multi Tool is.
This might run for a while :DI do have a "frequent enough" need for a file on a Multi Tool for reasons mentioned (wood, plastic, metal, manicure...).
If a Multi Tool has a useful file then "yes please".
Otherwise please no!
-
Last night while connormac was working on his RC truck, he reached for my TTi so he could use the file on a couple of bits. I tried taking a pic, but he broke the camera.


-
@McStitchy said:
If a Multi Tool has a useful file then "yes please".
Otherwise please no!
I think I'm of the same mindset.
I've been disappointed by so many multitool files. So, infrequent use met with limited utility (for the file's form factor) has left me thinking I don't really need a file in my multitool.
I recently acquired a Vic Hercules. A big SAK. A Workchamp would add a file...and an extra layer. But I decided that the Hercules was just at the upper limit of comfort for size. (I'll find out in the January 111mm challenge.) While the Vic file is a decent file (for file that is soft and not properly hardened), the value of having a file was negated by the extra size. So I chose the Hercules.
My guess is that many people make the very same decision. The Hercules is still in production. The Tradesman in not. Coincidence?

-
After tomorrow I will have a file with me and the world will be right again :D
Charge knife for the win

-
Yes. And I will have a Vic Classic....with one of my favorite multitool files. :D
-
I went with 2, I live having ready access to a metal file, it's one of the few tools I can't replicate in the wild or have on many other tools. I do have a Rolson fileset, but I'd rather just use a MT than dig that out of the cupboard

In the six months I've used my files (Rebar, Swisstool and Wave) to:
-Saw the tip off a nail and deburr the edge to make a ducktape roll
-Saw the lock off of my Gerber Zipknife since it got stuck open (filing down the corners and burrs)
-Polish out a chip in the edge of the 'package openener' on both my Rev (awful tool
) and Free T4And other misc. edge smoothing, I understand having a file a lot more than I understand having a woodsaw

-
@GearedForwards said:
I went with 2, I live having ready access to a metal file, it's one of the few tools I can't replicate in the wild or have on many other tools.Sounds like the file has come in handy for ya a few times. I'd agree with you about not being able to replicate a file in the wild, if multitool files were actual files, properly cut and hardened. (Although that may be true of other tools as well.) It seems that some of your tasks could have been accomplished with an abrasive rock or sharpening stone. I often carry a small sharpening stone with me to touch up an edge, anyway. You might argue that I'm carrying extra gear (a stone) to make up for a lack of a file. Perhaps.
I'm curious to know which specific file did you use to clean up the edge of the package opening tool?
How soft is the steel of the package opening tool? And did that contribute to its problems? And did the file work because the steel was soft?
Has your need for a file led you to carry a specific multitool? Or have you found all multitool files to be equally effective? If you are a dedicated fileman, I would expect/presume that your choice of multitool would be dictated, partially, by the file available. Is that the case, or do other features get priority with the file being secondary? Or tertiary?
For my part, I almost cary a multitool despite it's having a file. I have an old 'Made in USA' SOG Paratool. I really like this multitool because it is compact and capable. And the file is descent....by which I mean 'not horrible'. I carried this tool under my mountain bike seat for about 2 decades. I carried it along because I thought the pliers and file might come in handy if I had a repair or improvisation to make somewhere down the trail. Of course that never happened. (Flat tires did, but I never needed to smooth a link or polish a rim to get back home.) I think that was the first and last instance where I choose a tool, in part, for it's file.
Now I almost carry a multitool despite it's having a file. Alan just sent me a Vic Ranger (thanks, Alan!)--a Huntsman with a file layer. So...if I don't need a file, wouldn't I be better off with a Huntsman? Nah....I like the extra backside tools! And, who knows? Maybe the file could come in handy for something some day?
(I guess I need to do a Vic Ranger challenge.)During a few multitool challenges where I've had a file in my multitool, I have tested the files on an axe edge. Some 'make the cut', but even these are pretty feeble and minimally useful at best. Most struggle to sharpen an axe, some (I'm looking at you SOG) don't even cut an axe. Keep in mind most axes are heated and tempered to be softer (to resist chipping and be shock resistant) than a knife or chisel edge.
For actual axe repair and saw/chainsaw sharpening, I use a proper file. They work brilliantly. To get a good edge on an axe, I finish with a stone or sandpaper. It would never occur to me to use a multitool file to tackle such a task except in the most unusual circumstances. Stranded in the woods with a dull axe.....I'd find a good stone and set to restoring the edge. In the process of doing that, I'd probably damage a fingernail....and then I'd be glad to have a file in my multitool. ;)
-
@GearedForwards said:
I went with 2, I live having ready access to a metal file, it's one of the few tools I can't replicate in the wild or have on many other tools. I do have a Rolson fileset, but I'd rather just use a MT than dig that out of the cupboard
In the six months I've used my files (Rebar, Swisstool and Wave) to:
-Saw the tip off a nail and deburr the edge to make a ducktape roll
-Saw the lock off of my Gerber Zipknife since it got stuck open (filing down the corners and burrs)
-Polish out a chip in the edge of the 'package openener' on both my Rev (awful tool
) and Free T4And other misc. edge smoothing, I understand having a file a lot more than I understand having a woodsaw

seems like you use your multitool file to service your other multiools. 
That reminds me that the main reason I go to work is so that I can earn money to make car payments, for the car that I only use to get to work.

-
@ElevenBlade said:
seems like you use your multitool file to service your other multiools. 
That reminds me that the main reason I go to work is so that I can earn money to make car payments, for the car that I only use to get to work.

I know that feeling......

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


